Journal of the Korea Institute of Building Construction (한국건축시공학회지)

The Korean Institute of Building Construction (한국건축시공학회)
권호 표지
DOI QR코드

DOI QR Code

Suggestion on the Prototype of the Korean Barriers through the Investigation and Modeling of RC Protective Installments in Contact Areas

접적지역 RC형 방호시설 조사와 모델링을 통한 한국형 방호벽 설계안의 제시

  • Received : 2016.02.18
  • Accepted : 2016.06.30
  • Published : 2016.08.20
Download PDF
⟨ Previous Next ⟩

Abstract

The aim of this study is to suggest design requirements on the military barriers which are installed to reduce critical damage on protective facilities against sudden pin-point attacks caused by North Korean artilleries. For this purpose, site investigation and review of design drawings associated with barriers built in the contact areas are conducted. With identified data concerning barriers, the geometric modeling, which is used in the structural analysis, is performed. And then, the possible threat of North Korea is determined based on intelligence preparation of battlefields. Once the structural modeling and threat analysis are completed, structural damage on barriers and protective facilities are assessed in terms of impact, penetration, scabbing, and blast pressure effects. According to the analysis results, the thickness of barriers should be 450mm at least and current established barriers need to be structurally reinforced via sectional enlargement.

이 연구에서는 폭발원점으로부터 보호시설의 결정적 피해경감을 위해 설치되는 방호벽의 설계요구조건을 제안한다. 이를 위하여 일부지역에 구축된 방호벽과 관련한 현장조사 및 설계도서 검토를 수행한다. 규명된 방호벽 제원을 바탕으로 구조해석에 사용될 방호벽을 모델링하고, 방호벽에 대한 실질적인 위협을 판단한다. 구조 모델링 및 폭발위협 분석이 완료되면, 방호벽 및 보호시설의 손상정도를 충격, 관입, 파쇄 및 폭압효과 측면에서 수치해석을 통해 계산한다. 해석결과에 따르면, 방호벽의 두께는 최소 45cm 이상이어야 하며, 현재 설치된 방호벽은 단면증설을 통해 구조보강이 필요한 것으로 나타났다.

Keywords

References

  1. Park YJ, Park, SJ, Eom HS, Son KY. A Study on the Protective Capacity of Military Shelters in the Contact Areas. Journal of the Korea Institute of Military Seience and Technology. 2015 Aug;18(4):402-8. https://doi.org/10.9766/KIMST.2015.18.4.402
  2. Park YJ, Park SJ, Kim TH, Yu YJ, Son KY. Reinforcing Method for the Protective Capacities of Dispersal and Combat Facilities using Logistic Regression. Journal of the Korea Institute of Building Construction. 2016 Feb;16(1):77-85 https://doi.org/10.5345/JKIBC.2016.16.1.077
  3. US Department of Defense. UFC(Unified Facility Criteria) 3-340-02. Washington, D.C. (USA):US Department of Defense;2008. 1885 p.
  4. Lee GB. A Study on Relaxations of Protected areas for Korean Military bases and facilities : Focusing on the Storage of Military Ammunition and Explosives [master's thesis]. [Daejeon (Korea)]: Chungnam National University; 2012. 110 p.
  5. Ministry of National Defense. Ammunition design guidelines. Seoul (Korea):Ministry of National Defense; 2012. 51p.
  6. Ministry of National Defense. Protection design basis of major military facilities. Seoul (Korea):Ministry of National Defense;2012. 266 p.
  7. Ministry of National Defense. Protective structures design criteria. Seoul (Korea):Ministry of National Defense;1998.
  8. Baek JH, Kim SB, Son KY, Park YJ. The Study on assessment of protective capacity of the reinforced concrete box-type artillery positions. Journal of the Korea Institute of Military Seience and Technology. 2014 Apr;17(2):275-81. https://doi.org/10.9766/KIMST.2014.17.2.275
  9. Kim SB, Oh GD, Baek SH, Lee JH, Park YJ, Baek JH. Protective structural engineering. 2nd ed. Seoul (Korea) Cheongmoongak Ltd; 2013. 612 p.
  10. Park JK, Lim CW, Ryu DW, Son KY, Back JH, Park YJ. The design and protective capacity assessment of the prefabricated PC arch ammo magazines. Journal of the Korea Institute of Building Construction. 2014 Dec;14(6):615-21. https://doi.org/10.5345/JKIBC.2014.14.6.615
  11. Luccioni B, Ambrosini D, Nurick G, Snyman I. Craters produced by underground explosions. Computaters & Structures. 2009 Nov;87(21-22):1366-73. https://doi.org/10.1016/j.compstruc.2009.06.002