Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Behavior of reinforced concrete plates under impact loading: different support conditions and sizes

  • Husem, Metin (Department of Civil Engineering, Karadeniz Technical University) ;
  • Cosgun, Suleyman I. (Department of Civil Engineering, Karadeniz Technical University)
  • Received : 2014.10.30
  • Accepted : 2016.04.20
  • Published : 2016.09.25
⟨ Previous Next ⟩

Abstract

In this study, effects of impact loads on reinforced concrete (RC) plates are examined analytically. During examination of RC plates, they were exposed to impact loading with two different support conditions in three different sizes. RC plates in different support conditions were analyzed with Concrete Damage Plasticity Model (CDP) and reinforcing steel was modeled with Classical Metal Plasticity Model (CMP) by ABAQUS finite element software. After the analysis it is found that impact loads, displacements, energy absorption capacities and damage patterns are changed due to support conditions and plate sizes. Results that are obtained from RC plate experiments in literature under impact loads are found to be similar with the results of numerical analysis with CDP material models.

Keywords

References

  1. ABAQUS/CAE v6.12 Programme, Dassault Systemes Simulia Corp. Providence, RI, USA.
  2. ABAQUS Analysis User's Manual (2008), Version 6.8
  3. Abbas, H., Gupta, N.K. and Alam, M. (2004), "Nonlinear response of concrete beams and plates under impact loading", Int. J. Impact Eng., 30(8), 1039-1053. https://doi.org/10.1016/j.ijimpeng.2004.06.011
  4. Ammann, H. and Nussbaumer, H. (1995), Behavior of concrete and steel under dynamic actions, Vibrations problems in structures: Practical guide, Springer Science & Business Media, Berlin, Germany.
  5. Chen, Y. and May, I.M. (2009), "Reinforced concrete members under drop-weight impact", Struct. Build., 162(2_3), 45-56. https://doi.org/10.1680/stbu.2009.162.1.45
  6. Hibbitt, H., Karlsson, B. and Sorensen P. (2011), ABAQUS Analysis user's manual version 6.11, Dassault Systèmes Simulia Corp. Providence, RI, USA.
  7. Kamali, A.Z. (2012), "Shear strength of reinforced concrete beams subjected to blast loading", Masters of Thesis, Royal Institute of Technology, Stockholm, Sweden.
  8. Lee, J. and Fenves, G. (1998), "Plastic-damage model for cyclic loading of concrete structure", Eng. Mech., 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
  9. Lubliner, J., Oliver, J., Oller, S. and Onate, E. (1989), "A plastic-damage model for concrete", Solid. Struct., 25(3), 299-326. https://doi.org/10.1016/0020-7683(89)90050-4
  10. Malm, R. (2006), "Shear cracks in concrete structures subjected to in-plane stresses", Licentiate Thesis, Royal Institute of Technology, Stockholm, Sweden.
  11. Malm, R. (2009), "Predicting shear type cracks initiation and growth in concrete with nonlinear finite elements methods", Ph.D. Dissertation; Royal Institute of Technology, Stockholm, Sweden.
  12. Martin, O. (2010), "Comparison of different constitutive models for concrete in ABAQUS-explicit for missile impact analyses", JRF Scientific and Technical Report, European Commission Joint Research Centre Institute for Energy, Netherlands.
  13. Perumal, R. (2014), "Performance and modeling of high-performance steel fiber reinforced concrete under impact loads", Comput. Concrete, 13(2), 255-270. https://doi.org/10.12989/cac.2014.13.2.255
  14. Sawamoto, Y., Tsubota, H., Kasai, Y. and Koshika, N. (1998), "Analytical studies on local damage to reinforced concrete structures under impact loading by discrete element method", Nucl. Eng. Des., 179(2), 157-177. https://doi.org/10.1016/S0029-5493(97)00268-9
  15. Schellenberg, K., Volkwein, A., Roth A. and Vogel, T. (2007), "Large-scale impact tests on rock fall galeries", Proceedings of the 7th International Conference on Shock & Impact Loads on Structures, Beijing, China.
  16. Trivedi, N. and Singh, R.K. (2013), "Prediction of impact induced failure modes in RC slabs through nonlinear transient dynamic finite element simulation", Ann. Nucl. Energy., 56, 109-121. https://doi.org/10.1016/j.anucene.2013.01.020
  17. Zielinski, A.J. (1984), "Concrete structures under impact loading rate effects", Report 5-84-14, TH Delft, Netherlands.
  18. Zineddin, M. and Krauthammer, T. (2007), "Dynamic response and behavior of reinforced concrete slabs under impact loading", Int. J. Impact Eng., 34(9), 1517-1534. https://doi.org/10.1016/j.ijimpeng.2006.10.012

Cited by

  1. Finite element analysis of RC walls with different geometries under impact loading vol.21, pp.5, 2016, https://doi.org/10.12989/cac.2018.21.5.583
  2. Dynamic analysis of high-speed railway train-bridge system after barge collision vol.67, pp.1, 2016, https://doi.org/10.12989/sem.2018.67.1.009
  3. Experimentally and Numerically Investigating the Performances of Aramid Fiber-Reinforced Steel Beams Under Impact Loadings vol.45, pp.10, 2016, https://doi.org/10.1007/s13369-020-04608-1