DOI QR코드

DOI QR Code

Estimating Wood Weight Change on Air Drying Times for Three Coniferous Species of South Korea

  • Lee, Daesung (Department of Forest Management, College of Forest and Environmental Sciences, Kangwon National University) ;
  • Choi, Jungkee (Department of Forest Management, College of Forest and Environmental Sciences, Kangwon National University)
  • Received : 2016.08.04
  • Accepted : 2016.08.19
  • Published : 2016.08.31

Abstract

The purposes of this study are to calculate the green and dried weight using wood discs, to figure out weight change on air drying times, and to develop the model of wood disc weight change for Larix kaempferi, Pinus koraiensis, and Pinus densiflora. The variables affecting the weight change were investigated, and the pattern of weight change over time was figured out through linear models. When comparing the stem green weight calculated using wood discs in this study with the weight table of Korea Forest Service, the weight was not significantly different for L. kaempferi and P. koraiensis. On the other hand, in comparison of stem dried weight, the weight was significantly different in all of three species. In addition, various measurement factors were examined to figure out the relationship with weight change, and air drying times and disc diameter were found as significant independent variables. Finally, two linear models were developed to estimate air drying times of three species, fit statistics were significant for practical use.

Keywords

References

  1. Avery TE, Burkhart HE. 2002. Forest Measurements. 5th ed. McGraw-Hill, Boston, pp 456.
  2. Draper NR, Smith H. 1981. Applied Regression Analysis. 2nd ed. Wiley, New York, pp 709.
  3. Forestry Research Institute. 1994. Wood Properties and Uses of the Major Tree Species Grown in Korea. Forestry Research Institute, Seoul, pp 270. (in Korea)
  4. Jang JH, Kim JH, Kim NH. 2012. Variability of wood properties in stem of oriental white oak (Quercus aliena Blume) grown in research forest of Kangwon National University. J Res For Kangwon National University 32: 45-50. (in Korean with English abstract)
  5. Jung HS, Han GS, Lee NH. 1986. Estimating moisture content losses of air-drying related to meteorological variables for Korean red pine and pitch pine. J Korean Wood Sci Technol 14: 7-13. (in Korean with English abstract)
  6. Kim BR. 1995. Studies on variability in wood properties in tree stems of Pinus koraiensis (I) - differences in green moisture content and shrinkage between heartwood and sapwood -. J Korean Wood Sci Technol 23: 28-34. (in Korean with English abstract)
  7. Korea Forest Research Institute. 2008. Wood Properties of the Useful Tree Species Grown in Korea. Korea Forest Research Institute, Seoul, pp 390. (in Korean)
  8. Korea Forest Research Institute. 2011. The 5th National Forest Inventory Report. Korea Forest Research Institute, Seoul, pp 166. (in Korean)
  9. Korea Forest Research Institute. 2012a. Commercial Tree Species 1 Pinus densiflora. Korea Forest Research Institute, Seoul, pp 250. (in Korean)
  10. Korea Forest Research Institute. 2012b. Commercial Tree Species 3 Pinus koraiensis. Korea Forest Research Institute, Seoul, pp 168. (in Korean)
  11. Korea Forest Research Institute. 2012c. Commercial Tree Species 4 Larix kaempferi. Korea Forest Research Institute, Seoul, pp 180. (in Korean)
  12. Korea Forest Service. 2009. Volume . Weight Table . Yield Table. Korea Forest Service, Daejeon, pp 272. (in Korean)
  13. Korea Forest Service. 2014. Production of Forest Products in 2013. Korea Forest Service, Daejeon, pp 590. (in Korean)
  14. Korea Forestry Promotion Institute. 2015. The Domestic Timber Market Price Trends in Winter, 2014. Korea Forestry Promotion Institute, Seoul, pp 145. (in Korean)
  15. Korean Standards Association. 2001a. Determination of Density and Specific Gravity of Wood. KS F 2198. Korean Standards Association, Seoul, pp 5. (in Korean)
  16. Lee HW, Kim KY. 2001. Rapid moisture content determination technique using microwave oven. J Korean Wood Sci Technol 29: 16-24. (in Korean with English abstract)
  17. Lee SB, Jung HS. 1989. Studies on predicting the kiln drying time and moisture content of board and dimension lumber of Pinus densiflora using an internal moisture diffusion model of softwood. J Korean Wood Sci Technol 17: 67-81. (in Korean with English abstract)
  18. Lee SJ, Lee WY. 1993. Variation of green moisture contents in major coniferous tree stem. J Korean For En 13: 37-43. (in Korean with English abstract)
  19. Lee WH, Bae HM. 2000. Distribution of moisture content in wood with vapor transmission conditions. J Korean Wood Sci Technol 28: 3-9. (in Korean with English abstract)
  20. Peck EC, Kotok ES, Mueller LA. 1956. Air drying of ponderosa pine in Arizona. For Prod J 6: 88-96.
  21. SAS Institute Inc. 2013. SAS/STAT 9.4 User's Guide. SAS Institute Inc., Cary, NC.
  22. Seo Y, Lee D, Choi J. 2015. Growth analysis of red pine (Pinus densiflora) by stem analysis in the eastern region of Korea. J For Environ Sci 31: 47-54.
  23. Shin HH, Kim BR. 2003. Studies on variability in wood quality in stem of Larix leptolepis -green moisture content and shrinkage between heartwood and sapwood -. J Kor For En 22: 1-7. (in Korean with English abstract)
  24. Simpson WT, Hart CA. 2000. Estimates of air drying times for several hardwoods and softwoods. General Technical Report FPL-GTR-121. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, WI, pp 70.
  25. Simpson WT, Hart CA. 2001. Method for estimating air-drying times of lumber. For Prod J 51: 56-63.
  26. Simpson WT, Wang X. 2003. Estimating air drying times of small-diameter ponderosa pine and Douglas-fir logs. Research Paper FPL-RP-613. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, WI, pp 14.
  27. Simpson WT. 2004. Estimating air drying times of lumber with multiple regression. Research Note FPL-RN-0293. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, WI, pp 6.
  28. Smith WR, Arganbright DG. 1981. General drying characteristics of young-growth redwood dimension lumber. For Prod J 31: 44-49.