Smart Structures and Systems

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Reproduction of vibration patterns of elastic structures by block-wise modal expansion method (BMEM)

  • Jung, B.K. (School of Mechanical Engineering, Pusan National University) ;
  • Cho, J.R. (Department of Naval Architecture and Ocean Engineering, Hongik University) ;
  • Jeong, W.B. (School of Mechanical Engineering, Pusan National University)
  • Received : 2016.06.17
  • Accepted : 2016.08.05
  • Published : 2016.10.25
⟨ Previous Next ⟩

Abstract

The quality of vibration pattern reproduction of elastic structures by the modal expansion method is influenced by the modal expansion method and the sensor placement as well as the accuracy of measured natural modes and the total number of vibration sensors. In this context, this paper presents an improved numerical method for reproducing the vibration patterns by introducing a block-wise modal expansion method (BMEM), together with the genetic algorithm (GA). For a given number of vibration sensors, the sensor positions are determined by an evolutionary optimization using GA and the modal assurance criterion (MAC). Meanwhile, for the proposed block-wise modal expansion, a whole frequency range of interest is divided into several overlapped frequency blocks and the vibration field reproduction is made block by block with different natural modes and different modal participation factors. A hollow cylindrical tank is taken to illustrate the proposed improved modal expansion method. Through the numerical experiments, the proposed method is compared with several conventional methods to justify that the proposed method provides the improved results.

Keywords

Acknowledgement

Grant : BK21플러스

Supported by : 부산대학교

References

  1. Allaei, D. and Soedel, W. (1986), "Natural frequencies and modes of rings that deviate from perfect axisymmetry", J. Sound Vib., 111(1), 9-27. https://doi.org/10.1016/S0022-460X(86)81419-5
  2. Allemang, R.J. and Brown, D.L. (1982), "A correlation coefficients for modal vector analysis", Proceedings of International Modal Analysis Conference.
  3. Bernard, M.L. and Bronowicki, A.J. (1994), "Modal expansion method for eigensensitivity with repeated roots", AIAA J., 32, 1500-1506. https://doi.org/10.2514/3.12221
  4. Brehm, M., Zabel, V. and Bucher, C. (2010), "An automatic mode pairing strategy using an enhanced modal assurance criterion based on modal strain energies", J. Sound Vib., 329, 5375-5392. https://doi.org/10.1016/j.jsv.2010.07.006
  5. Carden, E.P. and Fanning, P. (2004), "Vibration based condition monitoring: A review", Struct. Health Monit., 3(4), 355-377. https://doi.org/10.1177/1475921704047500
  6. Chen, H.P. (2010), "Mode shape expansion using perturbed force approach", J. Sound Vib., 329, 1177-1190. https://doi.org/10.1016/j.jsv.2009.10.027
  7. Cho, J.R. and Lee, J.K. (2001), "Finite element techniques for the free-vibration and seismic analysis of liquid-storage tanks", Finite Elem. Anal. Des., 6-7, 467-483.
  8. Cho, J.R., Lee, J.H., Jeong, K.M. and Kim, K.W. (2012), "Optimum design of run-flat tire insert rubber by genetic algorithm", Finite Elem. Anal. Des., 52, 60-70. https://doi.org/10.1016/j.finel.2011.12.006
  9. Cho, Y.U. and Kang, G.H. (2016), "The force identification of 200kW IPMSM using phase reference spectrum", Proceedings of the 2016 IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC), Busan, Korea.
  10. Friswell, M.I. and Mottershead, J.E. (1995), Finite Element Modal Updating in Structural Dynamics, Kluwer Academic Publishers, Netherlands.
  11. Han, J.H. and Lee, I. (1999), "Optimal placement of piezoelectric sensors and actuators for vibration control of a composite plate using genetic algorithms", Smart Mater. Struct., 8(2), 257-268. https://doi.org/10.1088/0964-1726/8/2/012
  12. Hiramoto, K., Doki, H. and Obinata, G. (2000), "Optimal sensor/actuator placement for active vibration control using explicit solution of algebraic Riccati equation", J. Sound Vib., 229(5), 1057-1075. https://doi.org/10.1006/jsvi.1999.2530
  13. Jimenez, F.J. and De Frutos, J. (2005), "Virtual instrument for measurement, processing data, and visualization of vibration patterns of piezoelectric devices", Computer Standards & Interfaces, 27, 653-663. https://doi.org/10.1016/j.csi.2004.09.010
  14. Jung, B.K., Cho, J.R. and Jeong, W.B. (2015), "Sensor placement optimization for structural modal identification of flexible structures using genetic algorithm", J. Mech. Sci. Technol., 29(7), 2775-2783. https://doi.org/10.1007/s12206-015-0606-z
  15. Larson, C.B., Zimmerman, D.C. and Marek, E.L. (1994), "A comparison of modal test planning techniques: Excitation and sensor placement using the NASA 8-bay truss", Proceedings of the 12th International Modal Analysis Conference.
  16. Li, F.L., Hu, X.Y. and Zhang, L. (2013), "Left and right inverse eigenpairs problem for $\kappa$-Hermitian matrices", J. Appl. Math., ID 230408, 1-6.
  17. Lin, J. and Parker, R.G. (1999), "Sensitivity of planetary gear natural frequencies and vibration modes to model parameters", J. Sound Vib., 228(1), 109-128. https://doi.org/10.1006/jsvi.1999.2398
  18. McConnell, K.G. (1995), Vibration Testing - Theory and Practice, John Wiley & Sons, Singapore.
  19. Michalewicz, Z. (2013), Genetic Algorithms+Data Structures=Evolution Programs, Springer-Verlag, New York.
  20. Papadimitriou, C. (2004), "Optimal sensor placement methodology for parametric identification of structural systems", J. Sound Vib., 278, 923-947. https://doi.org/10.1016/j.jsv.2003.10.063
  21. Poston, W.L. and Tolson, R.H. (1992), "Maximizing the determinant of the information matrix with the effective independence method", J. Guid. Control Dynam., 15(6), 1513-1514. https://doi.org/10.2514/3.11419
  22. Sas, P., Bao, C., Augusztinovicz, F. and Desmet, W. (1995), "Active control of sound transmission through a double panel partition", J. Sound Vib., 180(40), 609-625. https://doi.org/10.1006/jsvi.1995.0102
  23. Stephan, C. (2012), "Sensor placement for modal identification", Mech. Syst. Signal Pr., 27, 461-470. https://doi.org/10.1016/j.ymssp.2011.07.022
  24. Worden, K. and Burrows, A.P. (2001), "Optimal sensor placement for fault detection", Eng. Struct., 23, 885-901. https://doi.org/10.1016/S0141-0296(00)00118-8
  25. Yi, T.H., Li, H.N. and Gu, L.M. (2012), "Sensor placement for structural health monitoring of Canton Tower", Smart Struct. Syst., 19(4), 313-329.
  26. Yi, T.H., Li, H.N. and Gu, M. (2011), "Optimal sensor placement for structural health monitoring based on multiple optimization strategies", Struct. Des. Tall Spec., 20(7), 881-900. https://doi.org/10.1002/tal.712
  27. Yi, T.H., Li, H.N. and Wang, C.W. (2015), "Multiaxial sensor placement optimization in structural health monitoring using distributed wolf algorithm", Struct. Control Health Monit., 23(4), 719-734. https://doi.org/10.1002/stc.1806
  28. Yi, T.H., Li, H.N. and Wang, X. (2013), "Multi-dimensional sensor placement optimization for Canton Tower focusing on application demands", Smart Struct. Syst., 12(3-4), 235-250. https://doi.org/10.12989/sss.2013.12.3_4.235

Cited by

  1. Vibration field estimation of a plate in time domain using Kalman filter vol.1075, pp.1742-6596, 2018, https://doi.org/10.1088/1742-6596/1075/1/012079
  2. Improved block-wise MET for estimating vibration fields from the sensor vol.64, pp.3, 2016, https://doi.org/10.12989/sem.2017.64.3.279
  3. 잡음이 섞인 센서신호를 이용한 구조물의 시간영역 진동장 예측 vol.27, pp.6, 2016, https://doi.org/10.5050/ksnve.2017.27.6.705
  4. Optimal sensor placement for cable force monitoring using spatial correlation analysis and bond energy algorithm vol.20, pp.6, 2016, https://doi.org/10.12989/sss.2017.20.6.769