DOI QR코드

DOI QR Code

Development and Performance Evaluation of a Two-component Thin Spray-on Liner to Guarantee Its Homogeneous Qualities and to Reduce Dust

균질한 품질 확보와 분진 저감을 위한 2성분 박층 뿜칠 라이너의 개발과 성능평가

  • Received : 2016.10.06
  • Accepted : 2016.10.19
  • Published : 2016.10.31

Abstract

This study aimed to develop a two-component TSL suitable for reducing dust and guaranteeing homogeneous qualities during its spraying. Its performance was evaluated by a series of laboratory and field tests. High ductility of two-component TSL prototypes resulted in increasing their elongation at break even though their tensile strengths were slightly lower than those of one-component powder TSLs. One prototype of the two-component TSLs developed in this study was verified to satisfy every criterion specified by EFNARC (2008). Especially, it increased the average compressive strength of mortar specimens by 50% even when it coated them only with the thickness of 3 mm. From a preliminary spraying test, a spraying machine suitable for the developed TSL prototype was derived and modified. After its field application, dust and rebound generated during its spraying works were found to be very minimal. Its spraying rate was recorded to be approximately $60m^2/hr$. In addition, it showed a very rapid hardening characteristic compared with general sprayable waterproofing membranes.

본 연구에서는 분진을 저감시킬 수 있고 균질한 품질을 확보하는 데 적합한 2성분 박층 뿜칠 라이너(TSL)를 개발하고 그 성능을 평가하였다. 2성분 TSL 시작품의 인장강도는 분말 1성분 TSL보다 다소 낮게 나타났으나, 높은 연성으로 인해 파괴 시의 신장률이 크게 측정되었다. 이외에도 EFNARC(2008)에서 제시하고 있는 성능기준들을 만족하였으며, 두께 3 mm로 피복한 코팅 압축시험 결과, 재령 28일의 평균 압축강도가 50% 이상 향상되는 것으로 확인되었다. 시험타설을 통해 본 연구에서 개발된 2성분 TSL 시작품에 적합한 타설장비를 도출하였으며, 실제 현장시공을 통해 2성분 TSL 타설 시의 분진과 리바운드가 극히 미미함을 확인하였다. 2성분 TSL의 타설속도는 $60m^2/hr$이었으며 일반적인 뿜칠 방수 멤브레인과 비교할 때 빠른 경화 특성을 나타내었다.

Keywords

References

  1. ASTM, 2015, Standard Test Method for Rubber Property-Durometer Hardness, ASTM D2240-15.
  2. ASTM, 2010, Standard Test Method for Tensile Properties of Plastics, D638-10.
  3. Archibald, J.F., 2004, Chapter 4. Canadian laboratory and field testing, Surface Support in Mining, Y. Povin, D. Stacey and J. Hadjigeorgiou (eds), Australian Centre for Geomechanics, 73-87.
  4. Chang, S.-H., T.-H. Kang, S.-W. Choi, C. Lee, G.-S. Hwang and M.-S. Choi, 2016, An Experimental Study on Fundamental Properties of a Sprayable Waterproofing Membrane, Tunnel & Underground Space, 26.3, 220-234. https://doi.org/10.7474/TUS.2016.26.3.220
  5. Chang, S.-H., G.-P. Lee, J.-T. Han, S.-W. Choi, G.-S. Hwang and M.-S. Choi, 2015, Development of a Powder-type Thin Spray-on Liner and Its Performance Evaluation at Different Curing Ages, Tunnel & Underground Space, 25.3, 293-302. https://doi.org/10.7474/TUS.2015.25.3.293
  6. Chang, S.-H., G.-P. Lee, J.-T. Han, Y.-T. Park, S.-W. Choi, G.-S. Hwang and M.-S. Choi, 2013, An Experimental Study on the Evaluation of Early-Age Mechanical Properties of Polymer-Based Thin Spray-on Liners, Tunnel & Underground Space, 23.5, 413-427. https://doi.org/10.7474/TUS.2013.23.5.413
  7. EFNARC, 2008, Specification and Guidelines on Thin Spray-on Liners for Mining and Tunnelling.
  8. EFNARC, 1996, European Specification for Sprayed Concrete.
  9. Han, J.-T., G.-P. Lee, Y.-T. Park, S.-W. Choi, G.-S. Hwang, M.-S. Choi and S.-H. Chang, 2013, An experimental study on bonding and bearing capacities of thin spray-on liner to evaluate its applicability as a tunnel support member, J. of Korean Tunn Undergr Sp Assoc, 15.6, 571-583. https://doi.org/10.9711/KTAJ.2013.15.6.571
  10. Lau, V., S. Saydam, Y. Cai and R. Mitra, 2008, Laboratory Investigation of Support Mechanism for Thin Spray-on Liners, Proceedings of the 12th International Conference of International Association for Computer Methods and Advances in Geomechanics(IACMAG), Goa, India, 1381-1388.
  11. Stubberfield, K., 2016, Masterseal $345^{(R)}$ Application Course - Lecture Material, Tunnelling & Underground Construction Academy (TUCA), London, April 13, 2016.
  12. Tannant, D.D., 2001, Thin Spray-on Liners for Underground Rock Support, Proceedings of the 17th International Mining Congress and Exhibition of Turkey - IMCET 2001, 57-73.