DOI QR코드

DOI QR Code

Numerical simulation of external pre-stressed steel-concrete composite beams

  • Moscoso, Alvaro M. (Department of Civil Engineering, Engineering School, Federal University of Rio Grande do Sul.) ;
  • Tamayo, Jorge L.P. (Department of Civil Engineering, Engineering School, Federal University of Rio Grande do Sul.) ;
  • Morsch, Inacio B. (Department of Civil Engineering, Engineering School, Federal University of Rio Grande do Sul.)
  • Received : 2016.11.03
  • Accepted : 2016.12.01
  • Published : 2017.02.25

Abstract

External pre-stressing is often used in strengthening or retrofitting of steel-concrete composite beams. In this way, a proper numerical model should be able to trace the completely nonlinear response of these structures at service and ultimate loads. A three dimensional finite element model based on shell elements for representing the concrete slab and the steel beam are used in this work. Partial interaction at the slab-beam interface can be taken into account by using special beam-column elements as shear connectors. External pre-stressed tendons are modeled by using one-dimensional catenary elements. Contact elements are included in the analysis to represent the slipping at the tendon-deviator locations. Validation of the numerical model is established by simulating seven pre-stressed steel-concrete composite beams with experimental results. The model predictions agree well with the experimental results in terms of collapse loads, path failures and cracking lengths at negative moment regions due to service loads. Finally, the accuracy of some simplified formulas found in the specialized literature to predict cracking lengths at interior supports at service loading and for the evaluation of ultimate bending moments is also examined in this work.

Keywords

Acknowledgement

Supported by : CAPES, CNPq

References

  1. Chen, S. and Gu, P. (2005), "Load carrying capacity of composite beams prestressed with external tendons under positive moment", J. Constr. Steel Res., 61(4), 515-530. https://doi.org/10.1016/j.jcsr.2004.09.004
  2. Chen, S. and Jia, Y. (2010), "Numerical investigation of inelastic buckling of steel-concrete composite beams prestressed with external tendons", Thin Wall. Struct., 48(3), 233-242. https://doi.org/10.1016/j.tws.2009.10.009
  3. Chen, S. and Zhang, Z. (2006), "Effective width of a concrete slab in steel-concrete composite beams prestressed with external tendons", J. Constr. Steel Res., 62(5), 493-500. https://doi.org/10.1016/j.jcsr.2005.08.009
  4. Chen, S., Wang, X. and Jia, Y. (2009), "A comparative study of continuous steel-concrete composite beams prestressed with external tendons: Experimental investigation", J. Constr. Steel Res., 65(7), 1480-1489. https://doi.org/10.1016/j.jcsr.2009.03.005
  5. Coarita, E. and Flores, L. (2015), "Nonlinear analysis of structures cable-truss", J. Eng. Technol., 7(3), 160-169.
  6. Dall'Asta, A. and Zona, A. (2005), "Finite element model for externally prestressed composite beams with deformable connection", J. Struct. Eng., 131(5), 706-714. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:5(706)
  7. Dall'Asta, A., Ragni, L. and Zona, A. (2007), "Analytical model for geometric and material nonlinear analysis of externally prestressed beams", J. Eng. Mech., 133(1), 117-121. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:1(117)
  8. Dias, M., Tamayo, J.L.P., Morsch, I.B. and Awruch, A.M. (2015), "Time dependent finite element analysis of steel-concrete composite beams considering partial interaction", Comput. Concrete, 15(4), 687-707. https://doi.org/10.12989/cac.2015.15.4.687
  9. EN 1994-1-1 (2004), Eurocode 4-Design of Composite Steel and Concrete Structures-Part 1-1: General Rules and Rules for Buildings, Bureau of Indian Standard, New Delhi, India.
  10. Hu, S.W. and Chen, L. (2012), "Test analysis on prestressed concrete composite beams with steel boxes subjected to torsion and combined flexure and torsion", Sci. China Technol. Sci., 55(12), 3302-3310. https://doi.org/10.1007/s11431-012-5030-3
  11. Jayaraman, H.B. and Knudson, W.C. (1981), "A curved element for the analysis of cable structures", Comput. Struct., 14(3-4), 325-333. https://doi.org/10.1016/0045-7949(81)90016-X
  12. Lou, T., Lopes, S.M. and Lopes, A.V. (2016), "Numerical modeling of externally prestressed steel-concrete composite beams", J. Constr. Steel Res., 121, 229-236. https://doi.org/10.1016/j.jcsr.2016.02.008
  13. Macorini, L., Fragiacomo, M., Amadio, C. and Izzuddin, B.A. (2006), "Long-term analysis of steel-concrete composite beams: FE modeling for effective width evaluation", Eng. Struct., 28(8), 1110-1121. https://doi.org/10.1016/j.engstruct.2005.12.002
  14. Nguyen, Q.H., Hjiaj, M. and Uy, B. (2010), "Time-dependent analysis of composite beams with continuous shear connection based on a space-exact stiffness matrix", Eng. Struct., 32(9), 2902-2911. https://doi.org/10.1016/j.engstruct.2010.05.009
  15. Nie, J., Tao, M., Cai, C. and Li, S. (2009), "Deformation analysis of prestressed continuous steel-concrete composite beams", J. Struct. Eng., 135(11), 1377-1389. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000067
  16. Nie, J., Tao, M., Cai, C. and Li, S. (2011), "Analytical and numerical modeling of prestressed continuous steel-concrete composite beams", J. Struct. Eng., 137(12), 1405-1418. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000409
  17. Sun, Q., Yang, Y., Fan, J., Zhang, Y. and Bai, Y. (2014), "Effect of longitudinal reinforcement and prestressing on stiffness of composite beams under hogging moments", J. Constr. Steel Res., 100, 1-11. https://doi.org/10.1016/j.jcsr.2014.04.017
  18. Tamayo, J.L.P. and Awruch, A.M. (2016), "Numerical simulation of reinforced concrete nuclear containment under extreme loads", Struct. Eng. Mech., 58(4), 799-823. https://doi.org/10.12989/sem.2016.58.5.799
  19. Tamayo, J.L.P., Morsch, I.B. and Awruch, A.M. (2013), "Static and dynamic analysis of reinforced concrete shells", Lat. Am. J. Solids Struct., 10(6), 1109-1134. https://doi.org/10.1590/S1679-78252013000600003
  20. Tamayo, J.L.P., Morsch, I.B. and Awruch, A.M. (2015), "Shorttime numerical analysis of steel-concrete composite beams", J. Brazil. Soc. Mech. Sci. Eng., 37(4), 1097-1109. https://doi.org/10.1007/s40430-014-0237-9
  21. Wayar, A. (2016), "Numerical analysis of composite beams by the finite element method: External prestressing", M.S. Dissertation, Federal University of Rio Grande do Sul, Porto Alegre, Brazil.
  22. Zona, A., Ragni, L. and Dall'Asta, A. (2008), "Finite element formulation for geometric and material nonlinear analysis of beams prestressed with external slipping tendons", Finit. Elem. Anal. Des., 44(15), 910-919. https://doi.org/10.1016/j.finel.2008.06.005
  23. Zona, A., Ragni, L. and Dall'Asta, A. (2009), "Simplified method for the analysis of externally prestressed steel-concrete composite beams", J. Constr. Steel Res., 65(2), 308-313. https://doi.org/10.1016/j.jcsr.2008.07.015

Cited by

  1. Finite element study of effective width in steel-concrete composite beams under long-term service loads vol.15, pp.8, 2018, https://doi.org/10.1590/1679-78254599
  2. Evaluation of constitutive relations for concrete modeling based on an incremental theory of elastic strain-hardening plasticity vol.22, pp.2, 2017, https://doi.org/10.12989/cac.2018.22.2.227
  3. Some Aspects of Numerical Modeling of Steel-Concrete Composite Beams with Prestressed Tendons vol.16, pp.7, 2017, https://doi.org/10.1590/1679-78255599
  4. Statistical bias indicators for the long-term displacement of steel-concrete composite beams vol.24, pp.4, 2017, https://doi.org/10.12989/cac.2019.24.4.379
  5. Cracking and bending strength evaluations of steel-concrete double composite girder under negative bending action vol.35, pp.3, 2017, https://doi.org/10.12989/scs.2020.35.3.371
  6. Assessment of Second-Order Effect in Externally Prestressed Steel-Concrete Composite Beams vol.26, pp.6, 2017, https://doi.org/10.1061/(asce)be.1943-5592.0001718
  7. Parametric analysis of steel-concrete composite beams prestressed with external tendons vol.189, pp.None, 2017, https://doi.org/10.1016/j.jcsr.2021.107087