References
- Cho, J. H., "An Analysis on the Effects of 3D Printers on Visual Entertainment," Journal of Korean Society of Design Culture, Vol. 21, No. 2, pp. 590-593, 2015.
- Kim, W. S., "Open Source Hardware Design Using 3D Printer," Korea Design Knowledge Society, Vol. 26, pp. 113-124, 2013.
- Choi, E. J., "A Study on the Stare-of-the-Art of 3D Printers," Proceedings of the Korean Society of Computer Information Conference, Vol. 20, No. 2, pp. 385-388, 2013.
- Park, K., "Investigation into Directional Properties of Rapid Prototypes and Its Application To FE Analysis Considering Anisotropy," Journal of Korean Society for Precision Engineering, Vol. 25, No. 11, pp. 126-133, 2008.
- Choi, W., "Measurement of Structural Properties of PLA Filament as a Supplier of 3D Printer," Journal of Korean Society of Agricultural Engineers, Vol. 57, No. 6, pp. 141-152, 2015. https://doi.org/10.5389/KSAE.2015.57.6.141
- Choi, J. W., "3D Printing Technologies A review," Journal of Korean Society of Manufacturing Process Engineers, Vol. 14, N0. 3, pp. 1-8, 2015.
- Shin, G. S., "Engineering Design of Prosthetic Hand using a 3D Printer," A Thesis for a Master, School of Mechanical Engineering Kumoh National University of Technology, Republic of Korea, 2015.
- 3D MATTER(2015), "What is the Influence of Infill %, Layer Height and Infill Pattern on My 3D Prints," Retrieved 10, March, 2015, from http://my3dmatter.com/influence-infill-layer-heightpattern/
Cited by
- Analysis of Mechanical Properties of Polymer Material for Clear Aligner using Uniaxial Tensile Test vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.064
- CAPP for 3D Printer with Metallic Wire Supplied from the Front vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.155
- A Systematic Review of Manufacturing Method for Splint Using 3D Printing Technology vol.26, pp.2, 2018, https://doi.org/10.14519/jksot.2018.26.2.01
- Development of a System to Convert a 3D Mesh Model in STL Format into OBJ Format vol.17, pp.3, 2018, https://doi.org/10.14775/ksmpe.2018.17.3.078
- Ceramic Direct Rapid Tooling with FDM 3D Printing Technology vol.18, pp.7, 2019, https://doi.org/10.14775/ksmpe.2019.18.7.083
- Effect of Fused Deposition Conditions on the Fracture Behavior of 3D Printed Tensile Specimens vol.37, pp.6, 2020, https://doi.org/10.7736/jkspe.020.048
- FFF방식의 3D프린터 노즐 크기와 층 높이가 방사선 차폐체 제작에 미치는 영향에 관한 연구 vol.14, pp.7, 2017, https://doi.org/10.7742/jksr.2020.14.7.891