Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

An Analysis and Industrial Classification of Modeling and Simulation Service Industry

모델링 및 시뮬레이션 서비스 산업 분류 및 현황 분석

  • Kim, Myungil (Supercomputing Modeling & Simulation Center, KISTI) ;
  • Jung, Jaeyun (Supercomputing Modeling & Simulation Center, KISTI) ;
  • Han, Yuri (Supercomputing Modeling & Simulation Center, KISTI) ;
  • Park, Sung-Uk (Dept. of Advanced Information Strategy, KISTI) ;
  • Kim, Jaesung (Supercomputing Modeling & Simulation Center, KISTI)
  • 김명일 (한국과학기술정보연구원 가상설계센터) ;
  • 정재연 (한국과학기술정보연구원 가상설계센터) ;
  • 한유리 (한국과학기술정보연구원 가상설계센터) ;
  • 박성욱 (한국과학기술정보연구원 첨단정보전략실) ;
  • 김재성 (한국과학기술정보연구원 가상설계센터)
  • Received : 2017.01.10
  • Accepted : 2017.03.10
  • Published : 2017.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

Since the year 2000, the growth rate of domestic manufacturing has declined and the sales and employment have decreased. Major developed countries have established a variety of strategies to strengthen their manufacturing competitiveness, and promote manufacturing innovation through the convergence of technology and ICT. The key to manufacturing innovation is to reduce the time and cost for developing new products using modeling and simulation (M&S) technology in the product design stage. M&S industries, which belong to the top sector of the industry value chain, have a huge ripple effect across other industries. On the other hand, the competitiveness of the domestic M&S industry is weak compared to developed countries and even the definition and classification of domestic M&S companies have not been made. In this paper, by analyzing the Korea Standard Industry Classification (KSIC), five fine industry classifications included in M&S service companies were derived. In addition, the 307 M&S service companies were derived in accordance with the selection procedure of 3 steps from the 11,822 related companies. To analyze the capabilities of domestic M&S service companies, the current status of the selected M&S service companies was investigated. Considering the Korean economy's high dependence on the manufacturing industry, strengthening the competitiveness of manufacturing industry is required by enhancing the capacities and building an ecosystem in domestic M&S services for future sustainable economic growth.

2000년대 이후 국내 제조업 성장률은 지속적으로 하락하고 있으며, 매출 및 고용이 감소하고 있는 추세이다. 주요 선진국은 제조업 경쟁력 강화를 위한 다양한 전략을 수립하여, ICT 기술과의 융합을 통한 제조업 혁신을 도모하고 있다. 제조업 혁신의 핵심은 제품 설계 단계에서 모델링 및 시뮬레이션(M&S) 기술을 통해 신제품 개발 시간 및 비용을 절감하는 것이다. M&S 산업은 산업 가치사슬의 상위분야에 속하며, 타 산업으로의 파급효과가 큰 업종이다. 그러나 국내 M&S 기업의 역량은 선진국 대비 매우 취약한 상황이며, M&S 기업의 정의 및 분류조차 이루어지지 않고 있다. 본 논문에서는 한국표준산업분류를 분석하여 M&S 서비스 기업들이 포함되는 5개의 산업 세세분류를 도출하고, 11,822개의 관련 기업 중 3단계의 선정 절차에 따라 307개의 M&S 서비스 기업을 도출하였다. 이중 211개의 M&S 서비스 기업 현황을 조사하여 국내 M&S 기업의 역량을 분석하였다. 제조업에 대한 의존도가 높은 우리 경제의 특성을 고려할 때, 향후 지속적인 경제성장을 위해서는 고급 두뇌산업인 국내 M&S 서비스의 역량 향상 및 생태계 조성을 통한 제조업의 경쟁력 강화가 필요하다.

Keywords

References

  1. S. Y. Kim and E. C. Lee, First Mover Strategy of Manufacturing in Korea, pp. 1-11, POSRI Report, 2015.
  2. Dong Woo Seo, Jaesung Kim, Ho Yoon Kim, Eun Jin Kim and Sung-Uk Park. "An Analysis on the Economic Ripple Effect of Super Computer-based Modeling & Simulation 4.0 Project," Proc.s of the Autumn Academic Conference 2014, Korea Technology Innovation Society(KOTIS), pp. 613-619, 2014.
  3. Yong-Yul, Kim, "Manufacturing Innovation and HPC(High Performance Computing) Utilization", Journal of Korea Technology Innovation Society, vol. 19, no. 2, pp. 231-253, 2016.
  4. TechNavio, CAE Market in EMEA Region 2014-2018, pp. 1-134, TechNavio, 2013.3.
  5. Kwangwon Suh, "Importance of Domestic CAE Software", Engineering Education, vol. 22, no. 4, pp. 18-24, 2015.
  6. CAD&Graphics, CAD/CAM/CAE/PDM Market in South Korea 2014, pp. 91-95, CAD&Graphics, 2015.
  7. Tuncer I. Oren, "The importance of a comprehensive and integrative view of modeling and simulation", Proc.s of the 2007 Summer Computer Simulation Conference, 2007.
  8. Andreas Tolk, "Engineering Management challenges for applying simulation as a green technology", Proc. of 2010 International Annual Conference of the American Society for Engineering Management Conference, 2010.
  9. DoD Instruction 5000.61, Modeling and Simulation(M&S) Verification, Validation, and Accreditation(VV&A), Department of Defense, 2009.
  10. Sang Young Choi, Introduction to Defense, Modeling and Simulation, pp. 3-6, Book Korea, 2010.
  11. National Science Foundation(NSF), Simulation-Based Engineering Science: Revolutionizing Engineering Science Through Simulation, National Science Foundation Blue Ribbon Panel on Simulation-Based Engineering Science Report, 2006.
  12. Bernard P. Zeigler, Herbert Praehofer, and Tag Gon Kim, Theory of Modeling and Simulation: Integrating Discrete Event and Continuous Complex Dynamic Systems, Academic Press, 2010.
  13. SY Diallo, RJ Gore, JJ Padilla, CJ Lynch, An Overview of Modeling and Simulation Using Content Analysis, Scientometrics, 2015. DOI: https://doi.org/10.1007/s11192-015-1578-6
  14. Sokolowski, John, and Catherine Banks(Editors), Principles of Modeling and Simulation: A Multidisciplinary Approach. Wiley, 2008.
  15. Myungil Kim, Sung-Uk Park, and Jaesung Kim, "An Economic Ripple Analysis of Domestic Supercomputing Modeling and Simulation", Journal of the Korea Academia-Industrial Cooperation Society, vol. 17, no. 11, pp. 340-347, 2016. DOI: http://dx.doi.org/10.5762/KAIS.2016.17.11.340
  16. KISTI, Supercomputing Based Modeling and Simulation 4.0 for Smart Manufacturing Innovation, Korea Institute of Science and Technology Information(KISTI), 2014.
  17. Yeon Sik Ahn and Song Chul Moon, "An Suggestion of the Software Industry Structure Improvement in Korea : Focusing on the IT Service and Solution Provider Firms", Journal of Information Technology Application, vol. 21, no. 1, 2014.
  18. Kook Chul Lee, "Study on Securing the International Competitiveness of Domestic Software Industry: Focusing on the comparison between Korea and US", Journal of Information and Society Study, 1994.
  19. Joo Sung Kim and Mi Jin Noh, "An Analysis on the Present State of the Market and the Competitiveness of Korean Next-Generation PC Industry", Electronics and Telecommunications Trends, vol. 23, no. 5, pp. 143-152, 2008.
  20. Ki-Jin Jang and Hyuk-Jun Choi, "A Study on the Innovation Capability Strengthening Plan for Manufacture-based Knowledge Service Industries", The e-Business Studies, vol. 15, no. 4, pp. 215-235, 2014.
  21. Sang-Hyun Lee, Sang Hoon Kim and Dong Hee Lee, A Study on Utilization and Development Strategy of Domestic Manufacture-Engineering, Korea Institute for Industrial Economics and Trade(KIET), 2016.
  22. Sang-Hyun Lee and Soon Hak Lee, Ideas for Generating High Value Added in the Engineering Industry, Korea Institute for Industrial Economics and Trade(KIET), 2014.
  23. Clayton Barrows and Edward T. Vieira, "Recommendation for the Development of a New Operational Classification System for the Food Service Industry", Journal of Hospitality & Tourism Research, vol. 37, no. 3, pp. 349-376, 2013. DOI: https://doi.org/10.1177/1096348012436375
  24. Keith Brook, David Matthews and Jon Darke, "Changes to the Picture of the UK economy - Impact of the New SIC 2007 Industry Classification", Economic & Labour Market Rivew, pp. 41-61, 2011.
  25. Yuhong Li, "Software Industry Competitive Strategy and Innovation", Proc. of 2011 International Conference of Information Technology, pp. 203-306, 2014.
  26. Sang Yoon Kim and Eun Chang Lee, The First-Mover Strategy for Korean Munufacturig Industry, POSCO Research Institute, 2015.
  27. Deloitte, 2013 Global Manufacturing Competitiveness Index, Deloitte, 2013.
  28. Hyundai Research Institute, The Evaluation and Implication of Manufacturing Innovation Policies, Hyundai Research Institute, 2014.
  29. Hyundai Research Institute, US's and Japan's Strategy for strengthening Manufacturing Competency and its implication, Hyundai Research Institute, 2013.
  30. Eun Hee Jee, An Analysis on Software Industry's Condition, Ministry of Science, ICT and Future Planning, 2014.
  31. Pyoung Yol Jang, Young Hwan Moon and Seok Won Hwang, Manufacturing-based Service R&D Strategy: Manufacturing Servitization Service R&D, Science and Technology Policy Institute(STEPI), 2014.
  32. SMBA, A Survey Report of Descriptive Statistics of Small and Medium Businesses, Small and Medium Business Administration (SMBA), 2014.
  33. Ministry of Trade, Industry and Energy, Establishing M&S Industry Ecosystem for Manufacturing Business's Smart Innovation, Ministry of Trade, Industry and Energy, 2015.
  34. Economic Ministerial Meeting, Ideas for Strengthening Engineering Industry's Competitiveness for High-value Job Creation, Economic Ministerial Meeting, 2016.