DOI QR코드

DOI QR Code

Mechanical properties of SFRHSC with metakaolin and ground pumice: Experimental and predictive study

  • Received : 2016.02.17
  • Accepted : 2017.01.24
  • Published : 2017.04.10

Abstract

The mechanical properties of steel fiber reinforced high strength concrete (SFRHSC) made with binary and ternary blends of metakaolin (MK) and ground pumice (GP) are investigated in this study. The investigated properties are ultrasonic pulse velocity ($U_{pv}$), compressive strength ($f_c$), flexural strength ($f_f$) and splitting tensile strength ($f_{st}$) of SFRHSC. A total of 16 steel fiber reinforced concrete mixtures were produced by a total binder content of $500kg/m^3$ for determining the effects of MK and GP on the mechanical properties. The design $f_c$ was acquired from 70 to 100 MPa by using a low water-binder ratio of 0.2. The test results exhibit that high strength concrete can be obtained by replacing the cement with MK and GP. Besides, correlations between these results are executed for comprehending the relationship between mechanical properties of SFRHSC and the strong correlations are observed between these properties. Moreover, two models in the gene expression programming (GEP) for predicting the $f_c$ of SFRHSC made with binary and ternary blends of MK and GP have been developed. The results obtained from these models are compared with the experimental results. These comparisons proved that the results of equations obtained from these models seem to agree with the experimental results.

Keywords

References

  1. Abbas, A.-A. (2013), "The effect of steel fiber on some mechanical properties of self compacting concrete", Am. J. Civil Eng., 1(3), 102-110. https://doi.org/10.11648/j.ajce.20130103.14
  2. ACI Committee 318 (1995), Building code requirements for structural concrete (ACI 318-1995) and Commentary; Farmington Hills, MI, USA.
  3. ACI Committee 363 (1992), State-of-the art report on high strength concrete (ACI 363R-92); Farmington Hills, MI, USA.
  4. ASTM A820/A820M-11 (2011), Standard specification for steel fibers for fiber-reinforced concrete; USA.
  5. ASTM C 192 (2000), Standard practice for making and curing concrete test specimens in the laboratory; Annual Book of ASTM Standards, Vol. 04.02.
  6. ASTM C 39/C 39M-12 (2012), Standard test method for compressive strength of cylindrical concrete specimens; ASTM Vol.04.02, West Conshohocken, PA, USA.
  7. ASTM C618-12a (2012), Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete; USA.
  8. Atis, C.D. and Karahan, O. (2009), "Properties of steel fiber reinforced fly ash concrete", Constr. Build. Mater., 23(1), 392-399. https://doi.org/10.1016/j.conbuildmat.2007.11.002
  9. Bauchkar, S.D. and Chore, H.S. (2014), "Rheological properties of self consolidating concrete with various mineral admixtures", Struct. Eng. Mech., Int. J., 51(1), 1-13. https://doi.org/10.12989/sem.2014.51.1.001
  10. Bernal, S., Gutierrez, R.D., Delvasto, S. and Rodriguez, E. (2010), "Performance of an alkali-activated slag concrete reinforced with steel fibers", Constr. Build. Mater., 24(2), 208-214. https://doi.org/10.1016/j.conbuildmat.2007.10.027
  11. Berrocal, C.G., Lundgren, K. and LOfgren, I. (2013), "Influence of steel fibres on corrosion of reinforcement in concrete in chloride environments: a review", Fibre Concrete 2013, Prague, Czech Republic, September.
  12. Bui, D.D., Hu, J. and Stroeven, P. (2005), "Particle size effect on the strength of rice husk ash blended gap-graded Portland cement concrete", Cement Concrete Comp., 27(3), 357-366. https://doi.org/10.1016/j.cemconcomp.2004.05.002
  13. Demirboga, R., Turkmen, I. and Karakoc, M.B. (2004), "Relationship between ultrasonic velocity and compressive strength for high-volume mineral-admixtured concrete", Cement Concrete Res., 34(12), 2329-2336. https://doi.org/10.1016/j.cemconres.2004.04.017
  14. El-Dieb, A.S. (2009), "Mechanical, durability and microstructural characteristics of ultra-high-strength self-compacting concrete incorporating steel fibers", Mater. Des., 30(10), 4286-4292. https://doi.org/10.1016/j.matdes.2009.04.024
  15. Eren, O. and Celik, T. (1997), "Effect of silica fume and steel fibers on some properties of high-strength concrete", Constr. Build. Mater., 11(1-8), 373-382. https://doi.org/10.1016/S0950-0618(97)00058-5
  16. Ferreira, C. (2001), "Gene expression programming: A new adaptive algorithm for solving problems", Complex Syst., 13(2), 87-129.
  17. Gesoglu, M., Guneyisi, E., Alzeebaree, R. and Mermerdas, K. (2013), "Effect of silica fume and steel fiber on the mechanical properties of the concretes produced with cold bonded fly ash aggregates", Constr. Build. Mater., 40, 982-990. https://doi.org/10.1016/j.conbuildmat.2012.11.074
  18. Giaccio, G., Sensale de, G.R. and Zerbino, R. (2007), "Failure mechanism of normal and high-strength concrete with rice-husk ash", Cement Concrete Comp., 29(7), 566-574. https://doi.org/10.1016/j.cemconcomp.2007.04.005
  19. Giner, V., Ivorra, S., Baeza, F.J. and Ferrer, B. (2011), "Effect of different admixtures on dynamic structural behavior of fiber reinforced concrete elements", Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011, Leuven, Belgium, July.
  20. Giner, V.T., Baeza, F.J., Ivorra, S., Zornoza, E. and Galao, O. (2012), "Effect of steel and carbon fiber additions on the dynamic properties of concrete containing silica fume", Mater. Design, 34, 332-339. https://doi.org/10.1016/j.matdes.2011.07.068
  21. Guneyisi, E., Gesoglu, M., Karaoglu, S. and Mermerdas, K. (2012), "Strength, permeability and shrinkage cracking of silica fume and metakaolin concretes", Constr. Build. Mater., 34, 120-130. https://doi.org/10.1016/j.conbuildmat.2012.02.017
  22. Guneyisi, E., Gesoglu, M., Akoi, A.O.M. and Mermerdas, K. (2014), "Combined effect of steel fiber and metakaolin incorporation on mechanical properties of concrete", Compos.: Part B: Eng., 56, 83-91. https://doi.org/10.1016/j.compositesb.2013.08.002
  23. Guven, A. and Gunal, M. (2008), "Genetic programming approach for prediction of local scour downstream of hydraulic structures", J. Irrig. Drain. Eng., 134(2), 241-249. https://doi.org/10.1061/(ASCE)0733-9437(2008)134:2(241)
  24. Hamid, R., Yusof, K.M. and Zain, M.F.M. (2010), "A combined ultrasound method applied to high performance concrete with silica fume", Constr. Build. Mater., 24(1), 94-98. https://doi.org/10.1016/j.conbuildmat.2009.08.012
  25. Holschemacher, K., Mueller, T. and Ribakov, Y. (2010), "Effect of steel fibres on mechanical properties of high-strength concrete", Mater. Design, 31(5), 2604-2615. https://doi.org/10.1016/j.matdes.2009.11.025
  26. Hwang, J.-H., Lee, D.H., Park, M.K., Choi, S.-H., Kim, K.S. and Pan, Z. (2015), "Shear performance assessment of steel fiber reinforced-prestressed concrete members", Comput. Concrete, 16(6), 825-846. https://doi.org/10.12989/cac.2015.16.6.825
  27. Jedrzejowicz, P. and Ratajczak-Ropel, E. (2009), "Agent-based gene expression programming for solving the RCPSP/max problem", Adapt. Nat. Comput. Algor., 5495, 203-212.
  28. Jiang, C., Fan, K., Wu, F. and Chen, D. (2014), "Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete", Mater. Design, 58, 187-193. https://doi.org/10.1016/j.matdes.2014.01.056
  29. Kaikea, A., Achoura, D., Duplan, F. and Rizzuti, L. (2014), "Effect of mineral admixtures and steel fiber volume contents on the behavior of high performance fiber reinforced concrete", Mater. Design, 63, 493-499. https://doi.org/10.1016/j.matdes.2014.06.066
  30. Kayadelen, C., Gunaydin, O., Fener, M., Demir, A. and Ozvan A. (2009), "Modeling of the angle of shearing resistance of soils using soft computing systems", Expert Syst. Appl., 36(9), 11814-11826. https://doi.org/10.1016/j.eswa.2009.04.008
  31. Kayali, O., Haque, M.N. and Zhu, B. (2003), "Some characteristics of high strength fiber reinforced lightweight aggregate concrete", Cement Concrete Comp., 25(2), 207-213. https://doi.org/10.1016/S0958-9465(02)00016-1
  32. Kelestemur, O. and Demirel, B. (2010), "Corrosion behavior of reinforcing steel embedded in concrete produced with finely ground pumice and silica fume", Constr. Build. Mater., 24(10), 1898-1905. https://doi.org/10.1016/j.conbuildmat.2010.04.013
  33. Khatib, J.M. (2008), "Metakaolin concrete at a low water to binder ratio", Constr. Build. Mater., 22(8), 1691-1700. https://doi.org/10.1016/j.conbuildmat.2007.06.003
  34. Koksal, F., Altun, F., Yigit, I. and Sahin, Y. (2008), "Combined effect of silica fume and steel fiber on the mechanical properties of high strength concretes", Constr. Build. Mater., 22(8), 1874-1880. https://doi.org/10.1016/j.conbuildmat.2007.04.017
  35. Luccioni, B., Ruano, G., Isla, F., Zerbino, R. and Giaccio, G. (2012), "A simple approach to model SFRC", Constr. Build. Mater., 37, 111-124. https://doi.org/10.1016/j.conbuildmat.2012.07.027
  36. Mo, K.H., Yap, K.K.Q., Alengaram, U.J. and Jumaat, M.Z. (2014), "The effect of steel fibres on the enhancement of flexural and compressive toughness and fracture characteristics of oil palm shell concrete", Constr. Build. Mater., 55, 20-28. https://doi.org/10.1016/j.conbuildmat.2013.12.103
  37. Nasser, K.W. and Al-Manaseer, A.A. (1987), "It's time for a change from 6x12 to 3x6 inch cylinders", ACI Mater. J., 84(3), 213-216.
  38. Nazari, A. (2013), "Compressive strength of geopolymers produced by ordinary Portland cement: Application of genetic programming for design", Mater. Design, 43, 356-366. https://doi.org/10.1016/j.matdes.2012.07.012
  39. Neville, A.M. (1996), Properties of Concrete, (4th and Final Ed.), Addison Wesley Logman, England.
  40. Nik, A.S. and Omran, O.L. (2013), "Estimation of compressive strength of self-compacted concrete with fibers consisting nano-$SiO_2$ using ultrasonic pulse velocity", Constr. Build. Mater., 44, 654-662. https://doi.org/10.1016/j.conbuildmat.2013.03.082
  41. Nikbin, I.M., Dehestani, M., Beygi, M.H.A. and Rezvani, M. (2014), "Effects of cube size and placement direction on compressive strength of self-consolidating concrete", Constr. Build. Mater., 59, 144-150. https://doi.org/10.1016/j.conbuildmat.2014.02.008
  42. Nili, M. and Afroughsabet, V. (2012), "Property assessment of steel-fibre reinforced concrete made with silica fume", Constr. Build. Mater., 28(1), 664-669. https://doi.org/10.1016/j.conbuildmat.2011.10.027
  43. Parande, A.K., Babu, B.R., Karthik, M.A., Kumaar, K.K.D. and Palaniswamy, N. (2008), "Study on strength and corrosion performance for steel embedded in metakaolin blended concrete/mortar", Constr. Build. Mater., 22(3), 127-134. https://doi.org/10.1016/j.conbuildmat.2006.10.003
  44. Perumal, R. (2014), "Performance and modeling of highperformance steel fiber reinforced concrete under impact loads", Comput. Concrete, 13(2), 255-270. https://doi.org/10.12989/cac.2014.13.2.255
  45. Poon, C.S., Kou, S.C. and Lam, L. (2006), "Compressive strength, chloride diffusivity and pore structure of high performance metakaolin and silica fume concrete", Constr. Build. Mater., 20(10), 858-865. https://doi.org/10.1016/j.conbuildmat.2005.07.001
  46. Rashid, M.A., Mansur, M.A. and Paramasivam, P. (2004), "Correlations between mechanical properties of high-strength concrete", J. Mater. Civil Eng., 14(3), 230-238. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:3(230)
  47. Rashiddadash, P., Ramezanianpour, A.A. and Mahdikhani, M. (2014), "Experimental investigation on flexural toughness of hybrid fiber reinforced concrete (HFRC) containing metakaolin and pumice", Constr. Build. Mater., 51, 313-320. https://doi.org/10.1016/j.conbuildmat.2013.10.087
  48. Ruano, G., Isla, F., Pedraza, R.I., Sfer, D. and Luccioni, B. (2014), "Shear retrofitting of reinforced concrete beams with steel fiber reinforced concrete", Constr. Build. Mater., 54, 646-658. https://doi.org/10.1016/j.conbuildmat.2013.12.092
  49. Saridemir, M. (2009), "Prediction of compressive strength of concretes containing metakaolin and silica fume by artificial neural networks", Adv. Eng. Softw., 40(5), 350-355. https://doi.org/10.1016/j.advengsoft.2008.05.002
  50. Shaaban, A.M. and Gesund, H. (1993), Splitting tensile strength of steel fiber reinforced concrete cylinders consolidated by rodding or vibrating. ACI Mater. J., 90(4), 366-369.
  51. Shariq, M., Prasad, J. and Masood, A. (2013), "Studies in ultrasonic pulse velocity of concrete containing GGBFS", Constr. Build. Mater., 40, 944-950. https://doi.org/10.1016/j.conbuildmat.2012.11.070
  52. Sim, J.-II, Yang, K.-H., Kim, H.-Y. and Choi, B.-J. (2013), "Size and shape effects on compressive strength of lightweight concrete", Constr. Build. Mater., 38, 854-864. https://doi.org/10.1016/j.conbuildmat.2012.09.073
  53. TS EN 12390-3 (2010), Testing hardened concrete - part 3: compressive strength of test specimens; TSE, Turkey.
  54. TS EN 12390-5 (2010), Testing hardened concrete - part 5: flexural strength of test specimens; TSE, Turkey.
  55. TS EN 12390-6 (2010), Testing hardened concrete - part 6: tensile splitting strength of test specimens; TSE, Turkey.
  56. TS EN-197-1 (2004), Cements-Part 1: Compositions and conformity criteria for common cements; Turkish Standards Institute, TSE, Turkey.
  57. Xu, B.W. and Shi, H.S. (2009), "Correlations among mechanical properties of steel fiber reinforced concrete", Constr. Build. Mater., 23(12), 3468-3474. https://doi.org/10.1016/j.conbuildmat.2009.08.017
  58. Yazici, S. and Sezer, G.I. (2007), "The effect of cylindrical specimen size on the compressive strength of concrete", Build. Environ., 42(6), 2417-2420. https://doi.org/10.1016/j.buildenv.2006.06.014
  59. Yi, S.-T., Yang, E.-I. and Choi, J.-C. (2006), "Effect of specimen sizes, specimen shapes and placement directions on compressive strength of concrete", Nucl. Eng. Des., 236(2), 115-127. https://doi.org/10.1016/j.nucengdes.2005.08.004
  60. Zhang, X.X., Elazim, A.M.A., Ruiz, G. and Yu, R.C. (2014), "Fracture behaviour of steel fibre-reinforced concrete at a wide range of loading rates", Int. J. Impact Eng., 71, 89-96. https://doi.org/10.1016/j.ijimpeng.2014.04.009

Cited by

  1. Durability properties of concrete containing metakaolin vol.6, pp.2, 2018, https://doi.org/10.12989/acc.2018.6.2.159
  2. Seismic behavior of SFRC shear wall with CFST columns vol.28, pp.5, 2017, https://doi.org/10.12989/scs.2018.28.5.527
  3. High temperature effect on the mechanical behavior of steel fiber reinforced self‐compacting concrete containing ground pumice powder vol.20, pp.5, 2017, https://doi.org/10.1002/suco.201900067
  4. Fire resistance and residual strength of reactive powder concrete Using metakaolin vol.36, pp.6, 2020, https://doi.org/10.12989/scs.2020.36.6.657
  5. Influence of calcined diatomite content and elevated temperatures on the properties of high strength mortars produced with basalt sand vol.22, pp.suppl1, 2017, https://doi.org/10.1002/suco.202000063
  6. Comparative study of hazelnut-shell biomass ash and metakaolin to improve the performance of alkali-activated concrete: A sustainable greener alternative vol.320, pp.None, 2017, https://doi.org/10.1016/j.conbuildmat.2021.126230