DOI QR코드

DOI QR Code

Flexural behaviour of reinforced concrete beams strengthened with NSM CFRP prestressed prisms

  • Liang, Jiong-Feng (Jiangxi Engineering Research Center of Process and Equipment for New Energy, East China Institute of Technology) ;
  • Yu, Deng (College of Civil and Architecture Engineering, Guangxi University of Science and Technology,) ;
  • Xie, Shengjun (Faculty of Civil and Architecture Engineering, East China Institute of Technology) ;
  • Li, Jianping (Faculty of Civil and Architecture Engineering, East China Institute of Technology)
  • Received : 2016.03.06
  • Accepted : 2016.12.22
  • Published : 2017.05.10

Abstract

The behaviour of reinforced concrete beams strengthened with near surface mounted (NSM) CFRP prestressed prisms was experimentally investigated. Five RC beams were tested under four point bending. All beams were made with dimensions of 300 mm in width, 2000 mm in length and 150 in depth. The effects of presstress level of CFRP prestressed prisms and prism material type were studied. The failure mode, load capacity, deflection, CFRP strain, steel strain and ductility of the tested beams were all analyzed. The results showed that the behavior of the reinforced concrete beams strengthened with NSM CFRP prestressed prisms showed a significant increase in the load-carrying capacity and the deformation capacity. The NSM CFRP prestressed prisms strengthening technique could be considered as an effective method for repairing RC structures.

Keywords

Acknowledgement

Supported by : Chinese National Natural Science Foundation, East China Institute of Technology, Guangxi Key Laboratory of Disaster Prevention and Structural Safety

References

  1. Banthia, V., Mufti, A.A., Svecova, D. and Bakht, B. (2003), "Transverse Confinement of Deck Slabs by Concrete Straps", Proceedings of the 6th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures, 6, 945-954.
  2. Benedetti, A., Fernandes, P., Granja, J.L., Sena-Cruz, J. and Azenha, M. (2016), "Influence of temperature on the curing of an epoxy adhesive and its influence on bond behaviour of NSM-CFRP systems", Compos. B, 89(15), 219-229. https://doi.org/10.1016/j.compositesb.2015.11.034
  3. Bilotta, A., Ceroni, F., Barros, J., Costa, I., Palmieri, A., Szabo, Z., Nigro, E., Matthys, S., Balazs, G. and Pecce, M. (2016), "Bond of NSM FRP-strengthened concrete: round robin test initiative", J. Compos. Constr., 20(1), 1061-1069.
  4. Bilotta, A., Ceroni, F., Nigro, E. and Pecce, M. (2015), "Efficiency of CFRP NSM strips and EBR plates for flexural strengthening of RC beams and loading pattern influence", Compos. Struct., 124, 163-175. https://doi.org/10.1016/j.compstruct.2014.12.046
  5. Capozucca, R., Blasi, M.G. and Corina, V. (2015), "NSM technique: Bond of CFRP rods and static/dynamic response of strengthened RC beams", Compos Struct., 127(1), 466-479. https://doi.org/10.1016/j.compstruct.2015.03.013
  6. Fernandes, P.M.G., Silva, P.M. and Sena-Cruz, J. (2015), "Bond and flexural behavior of concrete elements strengthened with NSM CFRP laminate strips under fatigue loading", Eng. Struct., 84(1), 350-361. https://doi.org/10.1016/j.engstruct.2014.11.039
  7. Konthesingha, K., Masia, M., Petersen, R. and Page, A. (2014), "Experimental evaluation of static cyclic in-plane shear behavior of unreinforced masonry walls strengthened with NSM FRP strips", J. Compos. Constr., 19(3), 1281-1299.
  8. Liang, J.F, Deng, Y. and Bai, Y. (2016), "Flexural behavior of concrete beams reinforced with CFRP prestressed prisms", Comput. Concrete, 17(3), 295-304. https://doi.org/10.12989/cac.2016.17.3.295
  9. Liang, J.F., Deng, Y., Wang, J.B. and Yi, P.H. (2016), "Mechanical properties of concrete beams reinforced with CFRP prestressed prisms under reverse cyclic loading", Earthq. Struct., 11(2), 315-326. https://doi.org/10.12989/eas.2016.11.2.315
  10. Liang, J.F., Deng, Y., Yang, Z.P. and Chai, X.J. (2016), "Tests of concrete slabs reinforced with CFRP prestressed prisms", Comput. Concrete, 18(3), 355-366. https://doi.org/10.12989/cac.2016.18.3.355
  11. Mostakhdemin Hosseini, M.R., Dias, S.J.E. and Barros, J.A.O. (2016), "Flexural strengthening of reinforced low strength concrete slabs using prestressed NSM CFRP laminates", Compos. B, 90(1), 14-29. https://doi.org/10.1016/j.compositesb.2015.11.028
  12. Mostakhdemin Hosseini, M.R., Dias, S.J.E. and Barros, J.A.O. (2014), "Effectiveness of prestressed NSM CFRP laminates for the flexural strengthening of RC slabs", Compos. Struct., 111, 249-258. https://doi.org/10.1016/j.compstruct.2013.12.018
  13. Nawy, E.G. and Chen, B. (1998), "Deformational behavior of high performance concrete continuous composite beams reinforced with prestressed prisms and instrumented with bragg grating fiber optic sensors", ACI Struct. J., 95(1), 51-60.
  14. Sebastian, W.M., Vincent, J. and Starkey, S. (2013), "Experimental characterisation of load responses to failure of a RC frame and a NSM CFRP RC frame", Constr. Build. Mater., 49, 962-973. https://doi.org/10.1016/j.conbuildmat.2013.07.005
  15. Svecova, D. and Razaqpur, A.G. (2000), "Flexural behavior of concrete beams reinforced with carbon fiber-reinforced polymer (CFRP) prestressed prisms", ACI Struct. J., 97(5), 731-738.
  16. Technical code for infrastructure application of FRP composites (GB50608-2010) (2010), Beijing. (in Chinese)

Cited by

  1. Experimental evaluation on comparative mechanical properties of Jute - Flax fibre Reinforced composite structures vol.74, pp.4, 2017, https://doi.org/10.12989/sem.2020.74.4.515
  2. Experimental investigation on thermal behavior, sound absorption, and flammability of natural fibre polymer composites vol.76, pp.5, 2017, https://doi.org/10.12989/sem.2020.76.5.613