Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

On triply coupled vibration of eccentrically loaded thin-walled beam using dynamic stiffness matrix method

  • Ghandi, Elham (Faculty of Technical and Engineering, University of Mohaghegh Ardabili) ;
  • Shiri, Babak (Faculty of Technical and Engineering, University of Mohaghegh Ardabili)
  • Received : 2016.08.11
  • Accepted : 2017.05.04
  • Published : 2017.06.25
⟨ Previous Next ⟩

Abstract

The effect of central axial load on natural frequencies of various thin-walled beams, are investigated by some researchers using different methods such as finite element, transfer matrix and dynamic stiffness matrix methods. However, there are situations that the load will be off centre. This type of loading is called eccentric load. The effect of the eccentricity of axial load on the natural frequencies of asymmetric thin-walled beams is a subject that has not been investigated so far. In this paper, the mentioned effect is studied using exact dynamic stiffness matrix method. Flexure and torsion of the aforesaid thin-walled beam is based on the Bernoulli-Euler and Vlasov theories, respectively. Therefore, the intended thin-walled beam has flexural rigidity, saint-venant torsional rigidity and warping rigidity. In this paper, the Hamilton‟s principle is used for deriving governing partial differential equations of motion and force boundary conditions. Throughout the process, the uniform distribution of mass in the member is accounted for exactly and thus necessitates the solution of a transcendental eigenvalue problem. This is accomplished using the Wittrick-Williams algorithm. Finally, in order to verify the accuracy of the presented theory, the numerical solutions are given and compared with the results that are available in the literature and finite element solutions using ABAQUS software.

Keywords

References

  1. Banerjee, J.R. (1989), "Coupled bending torsional dynamic stiffness matrix for beam elements", Int. J. Numer. Method. Eng., 28(6), 1283-1298. https://doi.org/10.1002/nme.1620280605
  2. Banerjee, J.R. (1991), "A Fortran routine for computation of coupled bending-torsional dynamic stiffness matrix of beam elements", Adv. Eng. Softw., 13(1), 17-24. https://doi.org/10.1016/0965-9978(91)90003-K
  3. Banerjee, J.R. and Williams, F.W. (1992), "Coupled bendingtorsional dynamic stiffness matrix for Timoshenko beam elements", Comput. Struct., 42(3), 301-310. https://doi.org/10.1016/0045-7949(92)90026-V
  4. Banerjee, J.R. and Fisher, S.A. (1992), "Coupled bending-torsional dynamic stiffness matrix for axially loaded beam elements", Int. J. Numer. Method. Eng., 33(4), 739-751. https://doi.org/10.1002/nme.1620330405
  5. Banerjee, J.R. and Williams, F.W. (1994), "Coupled bending-torsional dynamic stiffness matrix for an axially loaded Timoshenko beam element", Int. J. Solid. Struct., 31(6), 749-762. https://doi.org/10.1016/0020-7683(94)90075-2
  6. Banerjee, J.R., Guo, S. and Howson, W.P. (1996), "Exact dynamic stiffness matrix of a bending-torsion coupled beam including warping", Comput. Struct., 59(4), 613-621. https://doi.org/10.1016/0045-7949(95)00307-X
  7. Banerjee, J.R. (1997), "Dynamic stiffness formulation for structural elements: A general approach", Comput. Struct., 63(1), 101-103. https://doi.org/10.1016/S0045-7949(96)00326-4
  8. Chen, C. H., Zhu, Y. F., Yao, Y. and Huang, Y. (2016), "The finite element model research of the pre-twisted thin-walled beam", Struct. Eng. Mech., 57(3), 389-402. https://doi.org/10.12989/sem.2016.57.3.389
  9. Chen, H.H. and Hsiao, K.M. (2007), "Coupled axial-torsional vibration of thin-walled Z-section beam induced by boundary conditions", Thin-Wall. Struct., 45(6), 573-583. https://doi.org/10.1016/j.tws.2007.05.001
  10. Eken, S. and Kaya, M.O. (2015), "Flexural-torsional coupled vibration of anisotropic thin-walled beams with biconvex cross-section", Thin-Wall. Struct., 94, 372-383. https://doi.org/10.1016/j.tws.2015.03.026
  11. Eslimy-Isfahany, SH.R. and Banerjee J.R. (1996), "Dynamic response of an axially loaded bending-torsion coupled beam", J. Aircraft, 33(3), 601-607. https://doi.org/10.2514/3.46988
  12. Eslimy-Isfahany, S.H.R., Banerjee, J.R. and Sobey, A.J. (1996), "Response of a bending-torsion coupled beam to deterministic and random loads", J. Sound Vib., 195, 267-283. https://doi.org/10.1006/jsvi.1996.0421
  13. Ghandi, E., Rafezy, B. and Howson, W.P. (2012), "On the bi-planar motion of a Timoshenko beam with shear resistant in-fill", Int. J. Mech. Sci., 57(1), 1-8. https://doi.org/10.1016/j.ijmecsci.2011.12.011
  14. Ghandi, E., Rafezy, B., Abedi, K. and Howson, W.P. (2015), "Coupled flexural-torsional dynamic stiffness matrix of an elastically supported axially loaded beam with shear resistant in-fill", Struct. Des. Tall Spec. Build., 24(7), 537-554. https://doi.org/10.1002/tal.1179
  15. Howson, W.P. and Williams, F.W. (1973), "Natural frequencies of frames with axially loaded Timoshenko members", J. Sound Vib., 26(4), 503-515. https://doi.org/10.1016/S0022-460X(73)80216-0
  16. Jun, L., Rongying, S., Hongxing, H. and Xianding J. (2004) "Response of monosymmetric thin-walled Timoshenko beams to random excitations", Int. J. Solid. Struct., 41,6023-6040. https://doi.org/10.1016/j.ijsolstr.2004.05.030
  17. Kim, N.I. (2009), "Series solutions for spatially coupled buckling anlaysis of thin-walled Timoshenko curved beam on elastic foundation", Struct. Eng. Mech., 33(4), 447-484. https://doi.org/10.12989/sem.2009.33.4.447
  18. Rafezy, B. and Howson W.P. (2007), "Exact dynamic stiffness matrix for a thin-walled beam of doubly asymmetric cross-section filled with shear sensitive material", Int. J. Numer. Method. Eng., 69(13), 2758-2779. https://doi.org/10.1002/nme.1864
  19. Sheikh, A.H., Asadi, A. and Thomsen, O.T. (2015), "Vibration of thin-walled laminated composite beams having open and closed sections", Compos. Struct., 134, 209-215. https://doi.org/10.1016/j.compstruct.2015.08.025
  20. Shirmohammadzade, A., Rafezy, B. and Howson, W.P. (2011), "Exact dynamic stiffness matrix for a thin-walled beam-column of doubly asymmetric cross-section", Struct. Eng. Mech., 38(2),195-210. https://doi.org/10.12989/sem.2011.38.2.195
  21. Tanaka, M. and Bercin, A.N. (1999), "Free vibration solution for uniform beams of nonsymmetrical cross section using Mathematica", Comput. Struct., 71(1), 1-8. https://doi.org/10.1016/S0045-7949(98)00236-3
  22. Wittrick, W.H. and Williams, F.W. (1971), "A general algorithm for computing natural frequencies of elastic structures", Quart. J. Mech. Appl. Math., 24(3), 263-284. https://doi.org/10.1093/qjmam/24.3.263

Cited by

  1. Comparative analysis of fatigue assessment considering hydroelastic response using numerical and experimental approach vol.76, pp.3, 2017, https://doi.org/10.12989/sem.2020.76.3.355