Journal of the Korea Convergence Society (한국융합학회논문지)

Korea Convergence Society (한국융합학회)
권호 표지
DOI QR코드

DOI QR Code

Convergence Study on Composite Material of Unidirectional CFRP and SM 45C Sandwich Type that Differs in Stacking Angle

적층각도가 다른 단방향 CFRP와 SM45C샌드위치형 복합재료에 관한 융합적 연구

  • Park, Jae-Woong (Department of Mechanical & Automotive Engineering, Graduate School, Kongju University) ;
  • Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju University)
  • 박재웅 (공주대학교 대학원 기계공학과) ;
  • 조재웅 (공주대학교 기계자동차 공학부)
  • Received : 2017.04.15
  • Accepted : 2017.07.20
  • Published : 2017.07.28
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the inhomogeneous material composed of CFRP(carbon fiber reinforced plastic) and structural metal of SM45C is used for the light material. The finite element analysis on the basis of compact tension test was carried out by using the composite material for sandwich type bonded with the unidirectional CFRP that differs in fiber stacking angle at both sides with the core of SM 45C. CT test is the representative method to confirm the fracture behaviour due to crack in material under the load. The effect on crack and hole must be investigated in order to apply inhomogeneous material to mechanical structure. As the result of this study, the fracture behaviour by CT test of the composite material for sandwich was studied by simulation analysis. The sandwich composite of unidirectional CFRP with the stacking angle of [0/60/-60/0] has the superior strength and the maximum equivalent stress of about 182GPa.Also, the esthetic sense can be shown as the designed factor of shape with composite material is grafted onto the convergence technique.

본 연구에서는 고분자재료인 CFRP(Carbon Fiber Reinforced Plastic)과 구조용 금속인 SM45C로 이루어진 이종 복합재료가 경량화 재료용으로 사용되고 있다. SM45C를 심재로 갖고 양면에 섬유 적층각도가 다른 단반향 CFRP를 접착시킨 샌드위치형 복합재료를 이용하여 CT(Compact Tension)시험을 기초로 한 유한요소 해석을 진행하였다. CT시험은 하중을 받는 재료내의 크랙으로 인한 파괴거동을 확인하기 위한 대표적인 방법이다. 이종 복합재료를 기계 구조물에 적용하기 위해서는 크랙 및 구멍에 대한 영향을 연구하여야 한다. 샌드위치형 복합재료의 CT시험에 의한 파괴거동을 시뮬레이션 해석으로 연구하였다. 본 연구 결과로서, [0/60/-60/0]의 적층각도를 가진 단방향 CFRP 샌드위치형태 복합재료가 우수한 강도를 갖으며 최대 등가응력은 약 182GPa정도가 나타났다. 또한 복합 재료 형상으로서의 디자인적 요소를 융합 기술에 접목함으로서 그 미적인 감각을 나타낼 수 있다.

Keywords

References

  1. K. W. Kang, "Vibration Fatigue Analysis of Spot Welded Component considering Change of Stiffness due to Fatigue Damage" Journal of the Korea Convergence Society, Vol. 5, No. 1, pp. 1-8, 2014. https://doi.org/10.15207/JKCS.2014.5.1.001
  2. J. U. Cho, "Structure Safety Analysis on Crack Propagation in Compact Tension Specimen", Journal of the Korea Convergence Society, Vol. 5, No. 1, pp. 23-27, 2014. https://doi.org/10.15207/JKCS.2014.5.1.023
  3. Y. J. Jang, K. W. Kang, "Simplified Load Caculation and Structure Test for Scale Down Model of Small Wind Turbine Blade according to IEC 61400-2", Journal of the Korea Convergence Society, Vol. 4, No. 3, pp. 1-5, 2013. https://doi.org/10.15207/JKCS.2013.4.3.001
  4. J. W. Park, S. S. Cheon, J. U. Cho, "A Study on Fracture Behavior of Center Crack at Unidirectional CFRP due to Stacking Angle", Composites Research Special Issue Paper, Vol. 29, No. 6, pp. 342-346, 2016.
  5. J. W. Park, J. U. Cho, "A Study of Fracture Behavior due to the Propagation of Center Crack at Unidirectional CFRP through Finite Element Analysis", Journal of the Korean Society of Mechanical Technology, Vol. 19, No. 1, pp. 21-26, 2017. https://doi.org/10.17958/ksmt.19.1.201702.21
  6. H. K. Choi and J. U. Cho, "Study on the Fatigue Analysis of DCB Model with Aluminum Foam", Journal of Korean Society of Mechanical Technology, Vol. 14, No. 6, pp. 39-43, 2012.
  7. G. W. Hwang, "A Property of Crack Propagation at the Specimen of CFRP with Layer Angle", Korean Society of Mechanical Technology, Vol. 40, No. 12, pp. 1013-1019, 2016.
  8. Y. H. Cho, "Manufacturing convergence simulation system effect for the degree of perfection improvement of the new product", Journal of Digital Convergence, Vol. 13, No. 6, pp. 91-103, 2015. https://doi.org/10.14400/JDC.2015.13.6.91
  9. O. Zhao, L. Gardner, B. Young, "Bucling of ferritic stainless steel members under combinded axial compression and bending", Journal of Constructional Steel Research, Vol.117, No. 12, pp. 35-48, 2016. https://doi.org/10.1016/j.jcsr.2015.10.003
  10. V. N. Pilipchuk, R. A. Ibrahim, I. Grace, "Low temperature brittle debond damage under normal compression of sandwich plates: Analytical modeling and experimental validation", Composite Structures, Vol. 98, pp. 24-33, 2013. https://doi.org/10.1016/j.compstruct.2012.10.052
  11. B. J. Stauder, H. Kerber, P. Schumacher "Foundry sand core property assessment by 3-point bending test evaluation" Journal of Materials Processing Technology, Vol.237, No. 7, pp.188-196, 2016. https://doi.org/10.1016/j.jmatprotec.2016.06.010
  12. M. Mohamed, S. Anandan, Z. Huo, V. Birman, J. Volz, K. Chandrashekhara, "Manufacturing and characterization of polyurethane based sandwich composite structures", Composite Structures, Vol. 123, pp. 169-179, 2015. https://doi.org/10.1016/j.compstruct.2014.12.042
  13. T. A. Sebaey, E. Mahdi, "Behavior of pyramidal lattice core sandwich CFRP composites under biaxial compression loading", Composite Structures, Vol. 116, pp. 67-74, May, 2014. https://doi.org/10.1016/j.compstruct.2014.05.014
  14. O. T. Thomsen, W. Rits, D. C. G. Eaton, S. Brown, "PLY DROP-OFF EFFECTS IN CFRP/HONEYCOMB SANDWICH PANELS-THEORY", Composites Science and Technology, Vol. 56, pp. 407-422, 1996. https://doi.org/10.1016/0266-3538(95)00145-X
  15. J. Cao, K. Cai, Q. Wang, J. Shi, "Damage behavior of a bonded sandwithc beam with corrugated core under 3-point bending", Materials and Design, Vol. 95, No. 4, pp. 165-172, 2016. https://doi.org/10.1016/j.matdes.2016.01.083
  16. M. J. Kang, J. U. Cho, "A Study on Structural Durability due to the Configuration of Ripper at Excavator", Journal of the Korea Convergence Society, Vol. 5, No. 2, pp. 13-18, 2014. https://doi.org/10.15207/JKCS.2014.5.2.013
  17. M. S. Koh, S. K. Kwon, S. L, Gil, "A Study for the Dynamic Characteristics and Correlation with Test Result of Gantry Robot based on Finite Element Analysis", Journal of the Korea Convergence Society, Vol. 13, No. 1, pp. 269-274, 2015.
  18. Y. T. Kim, Y. S. Jeong, "Optimization Routing Protocol based on the Location, and Distance information of Sensor Nodes ", Journal of digital Convergence, Vol. 13, No. 2, pp. 127-133, 2015. https://doi.org/10.14400/JDC.2015.13.2.127
  19. S. M. Gu, S. I. Park, K. D. Park, "A Study on the Contribution Evaluation of Developer in Convergence Social App Manufacturing Platform", Journal of digital Convergence , Vol. 13, No. 9, pp. 225-233, 2015. https://doi.org/10.14400/JDC.2015.13.9.225
  20. K. C. Kim, "Development of Optical Illusion Design Pattern for Furniture Using a UV Curing Resin," Journal of Convergence for Information Technology, Vol. 7, No. 1, pp. 43-48, 2017. https://doi.org/10.14801/jaitc.2017.7.2.43