Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Development and Performance Evaluation of Hybrid Measuring Instrument

하이브리드 측정기의 개발 및 성능평가

  • Received : 2017.04.17
  • Accepted : 2017.04.30
  • Published : 2017.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

There are two types of expensive measuring instruments currently on the market shape measurement and roundness measurement instruments. As they are very expensive, from tens of millions to more than 200 million won, buying them is economically burdensome for small companies or individuals. Therefore, in order to integrate the shape and roundness measurements into a single transfer device, this study aimed to reduce the trial and error by 3D modeling and simulation, and we confirmed the feasibility of operation. Based on these outcomes, a prototype hybrid measuring instrument was fabricated. As a result of performance evaluation and comparative evaluation, we verified the feasibility of implementation and application of the hybrid measuring instrument.

Keywords

References

  1. Bae, J. I. and Hwang, Y. Y., "On Study for Shape Measurement using 3D Auto Inspection System," Journal of the Korean Society of Manufacturing Process Engineers, pp. 309-311, 2008.
  2. Kim, B. C., "Development of Aspheric Surface Profilometry using 2nd Derivative," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 2, pp. 104-109, 2011.
  3. Lee, J. M. and Jo, N. G., "Development of Roundness measurement system using multi-probe method," A Thesis for a Master, Hanyang University, republic of korea, 2015.
  4. Kim, H. G. and Lee D. G., "Development of Error Compensation Program for the Articulating Probe Calibration," The Korean Society of Manufacturing Technology Engineers, pp. 9-14, 2004.
  5. Hwang, J. D., and Ko, H. J., "Development of the Optimized Angle Head for Internal Shape Machining Using Five-Axis Machine Tool," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 123-129, 2015. https://doi.org/10.14775/ksmpe.2015.14.1.123
  6. Lee, H. J., "A Study on the Machine Simulation of Rotary type Multi-axis Machine," Journal of the Korean Society of Manufacturing Process Engineers, pp. 23-25, 2011.
  7. Moon, S. H. and Lee, C. H., "A Basic on Structural Analysis of C3 Grade Double end-cap Type Ball Screw," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 1, pp. 118-118, 2016.
  8. Lee, C. H. and Lee, E. S., "Touch-Trigger Probe Error Compensation in a Machining Center," The Korean Society of Manufacturing Technology Engineers, Vol. 35, No. 6, pp. 661-667, 2011.
  9. Kim, H. I., "An Integrated C Programming Environment for Novices Based on Visuals," The Journal of Korean Association of Computer Education, Vol. 16, No. 6, pp. 111-120, 2011.
  10. Sim, J. Y. and Oh J. S., "Performance Evaluation of Hydrostatic Bearing Guided Rotary Table for Large Volume Multi-tasking Vertical Lathe," Journal of the Korean Society for Precision Engineering, Vol. 31, No. 7, pp. 635-642, 2014. https://doi.org/10.7736/KSPE.2014.31.7.635
  11. Shin, K. Y. and Hwang, Seon., "Development of Contact-Type Thickness Measurement Machine using LVDT Sensors," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 151-159, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.151
  12. Han, E. K., "An Analysis of Perfirmance Error of High Precision Roundness Measuring Instrument," The Korean Society of Manufacturing Engineers, pp. 540-544, 1988.
  13. Kim, S. H. and Kim, B. H., "A Study on the Measurement Method and Uncertainty Factors for Precision Inspection to Fed Unit of High Precision Machine Tool," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 4, pp. 55-61, 2012.