Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

Assessment of the Implementation of a Neutron Measurement System During the Commissioning of the Jordan Research and Training Reactor

  • Bae, Sanghoon (Division of Research Reactor System Design, Korea Atomic Energy Research Institute) ;
  • Suh, Sangmun (Division of Research Reactor System Design, Korea Atomic Energy Research Institute) ;
  • Cha, Hanju (Department of Electrical Engineering, Intelligent Power Conversion Laboratory, Chungnam National University)
  • Received : 2016.06.29
  • Accepted : 2016.11.07
  • Published : 2017.06.25
Download PDF
⟨ Previous Next ⟩

Abstract

The Jordan Research and Training Reactor (JRTR) is the first research reactor in Jordan, the commissioning of which is ongoing. The reactor is a 5-MWth, open-pool type, light-water-moderated, and cooled reactor with a heavy water reflector system. The neutron measurement system (NMS) applied to the JRTR employs a wide-range fission chamber that can cover from source range to power range. A high-sensitivity boron trifluoride counter was added to obtain more accurate measurements of the neutron signals and to calibrate the log power signals; the NMS has a major role in the entire commissioning stage. However, few case studies exist concerning the application of the NMS to a research reactor. This study introduces the features of the NMS and the boron trifluoride counter in the JRTR and shares valuable experiences from lessons learned from the system installation to its early commissioning. In particular, the background noise relative to the signal-to-noise ratio and the NMS signal interlock are elaborated. The results of the count rates with the neutron source and the effects of the discriminator threshold are summarized.

Keywords

References

  1. S.S. Kapoor, V.S. Ramamurthy, Nuclear radiation detectors, New Age International, India, 1986, pp. 34-36.
  2. G.F. Knoll, Radiation Detection and Measurement, fourth ed., John Wiley & Sons, Hoboken, NJ, USA, 2010, pp. 520-522.
  3. S.H. Bae, Y.S. Suh, H.J. Cha, Response time consideration for digitalized safety instrumentation applied to research reactor, Institute of Electrical and Electronics Engineers, New York, NY, USA, 2015.
  4. B.J. Jun, S.J. Park, K.P. Hong, C.S. Lee, PC-based random neutron process measurement in a thermal reactor, J. Korean Nucl. Soc. 22 (1990) 58-65.
  5. C.G. Clayton, Nuclear geophysics: selected papers on applications of nuclear techniques in mineral exploration, Mining and Process Control, Britain, 1983, pp. 261-263.
  6. U.S. NRC Office of Nuclear Regulatory Research, Accuracy and Detection Limits for Bioassay Measurements in Protection - Statistical Consideration, Nuclear Regulatory Commission, Washington, DC, USA, 1986.
  7. N. Tsoulfanidis, S. Landsberger, Measurement and Detection of Radiation, third ed., CRC Press, Boca Raton, FL, USA, 2011, pp. 375-377.
  8. Centronic Ltd., Technical Data Sheet: BF3 Proportional Counters, Centronic Ltd., Croydon, UK, 2005.
  9. Kim Young-Ki, Linearity Improvement on Wide-range Log Signal of Neutron Measurement System for HANARO, IGORR-6, Daejeon, Korea, 1998.