DOI QR코드

DOI QR Code

Influence of ground pumice powder on the bond behavior of reinforcement and mechanical properties of self-compacting mortars

  • Benli, Ahmet (Department of Civil Engineering, Bingol University) ;
  • Karatas, Mehmet (Department of Civil Engineering, Firat University) ;
  • Sastim, M. Veysel (Department of Civil Engineering, Firat University)
  • 투고 : 2017.02.22
  • 심사 : 2017.04.24
  • 발행 : 2017.09.25

초록

The aim of this study is to investigate the effect of the bond strength of self-compacting mortars (SCMS) produced from ground pumice powder (GPP) as a mineral additive. In this scope, six series of mortars including control mix were prepared that consist of 7%, 12%, 17%, 22% and 27% of ground pumice powder by weight of cement. A total of 54 specimens of $40{\times}40{\times}160mm$ were produced and cured at the age of 3, 28 and 90-day for compressive and tensile strength tests and 18 specimens of $150{\times}150{\times}150mm$ mortar were prepared and cured at 28 days for bond strength tests. Flexural tensile strength and compressive strength of $40{\times}40{\times}160mm$ specimens were measured at the curing age of 7, 28 and 90-day. Mini V-funnel flow time and mini slump flow diameter tests were also conducted to obtain rheological properties. As a result of the study, it was observed that the SCMs containing 12% of GPP has the highest bond strength as compared to control and GPP mortars. Compressive strength slightly increased up to 12% of GPP.

키워드

참고문헌

  1. ASTM C348 (2002), Standard Test Method for Flexural Strength of Hydraulic Cement Mortars, Annual book of ASTM standards, U.S.A.
  2. ASTM C349 (2002), Standard Test Method for Compressive Strength of Hyraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure, Annual Book of ASTM Standards, U.S.A.
  3. Aydin, S. and Baradan, B. (2007), "Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars", Cement Concrete Res., 37(6), 988-995. https://doi.org/10.1016/j.cemconres.2007.02.005
  4. Beycioglu, A., Arslan, M.E., Bideci, O.S., Bideci, A. and Emiroglu, M. (2015), "Bond behavior of lightweight concretes containing coated pumice aggregate: Hinged beam approach", Comput. Concrete, 16(6), 909-918. https://doi.org/10.12989/cac.2015.16.6.909
  5. Binici, H., Aksogan, O., Sevinc, A.H. and Kucukonder, A. (2014), "Mechanical and radioactivity shielding performances of mortars made with colemanite, barite, ground basaltic pumice and ground blast furnace slag", Constr. Build. Mater., 50, 177-183. https://doi.org/10.1016/j.conbuildmat.2013.09.033
  6. Bonavetti, V., Donza, H., Menendez, G., Cabrera, O. and Irassar, E.F. (2003), "Limestone filler cement in low w/c concrete: A rational use of energy", Cement Concrete Res., 33(6), 865-871. https://doi.org/10.1016/S0008-8846(02)01087-6
  7. Bosiljkov, V.B. (2003), "SCC mixes with poorly graded aggregate and high volume of limestone filler", Cement Concrete Res., 33(9), 1279-1286. https://doi.org/10.1016/S0008-8846(03)00013-9
  8. Campione, G. and La Mendola, L. (2004), "Behavior in compression of lightweight fiber reinforced concrete confined with transverse steel reinforcement", Cement Concrete Compos., 26(6), 645-656. https://doi.org/10.1016/S0958-9465(03)00047-7
  9. Da Silva, P.R. and De Brito, J. (2015), "Fresh-state properties of self-compacting mortar and concrete with combined use of limestone filler and fly ash", Mater. Rese.-Ibero-Am. J. Mater., 18(5), 1097-1108.
  10. Deng, Z.C., Daud, J.R. and Yuan, C.X. (2014), "Bonding between high strength rebar and reactive powder concrete", Comput. Concrete, 13(3), 411-421. https://doi.org/10.12989/cac.2014.13.3.411
  11. Domone, P.L.J. and Jin, J. (1999), "Properties of mortar for selfcompacting concrete", Rilem Proc., 7, 109-120.
  12. Dybel, P. and Furtak, K. (2014), "Effect of silica fume content on the bond stiffness of reinforcement bars in high-performance concrete", Cem. Wapno Beton, 19(2), 106.
  13. EFNARC (2002), Specifications and Guidelines for Self-Compacting Concrete, 29-35.
  14. Felekoglu, B., Tosun, K., Baradan, B., Altun, A. and Uyulgan, B. (2006), "The effect of fly ash and limestone fillers on the viscosity and compressive strength of self-compacting repair mortars", Cement Concrete Res., 36(9), 1719-1726. https://doi.org/10.1016/j.cemconres.2006.04.002
  15. Golafshani, E.M., Rahai, A. and Kebria, S.S.H. (2014), "Prediction of the bond strength of ribbed steel bars in concrete based on genetic programming", Comput. Concrete, 14(3), 327-U144. https://doi.org/10.12989/cac.2014.14.3.327
  16. Granata, M.F. (2015), "Pumice powder as filler of self-compacting concrete", Constr. Build. Mater., 96, 581-590. https://doi.org/10.1016/j.conbuildmat.2015.08.040
  17. Hossain, K.M.A. (2008), "Bond characteristics of plain and deformed bars in lightweight pumice concrete", Constr. Build. Mater., 22(7), 1491-1499. https://doi.org/10.1016/j.conbuildmat.2007.03.025
  18. Hossain, K.M.A. (2004), "Development of volcanic pumice based cement and lightweight concrete", Mag. Concrete Res., 56(2), 99-109. https://doi.org/10.1680/macr.2004.56.2.99
  19. Kabay, N., Tufekci, M.M., Kizilkanat, A.B. and Oktay, D. (2015), "Properties of concrete with pumice powder and fly ash as cement replacement materials", Constr. Build. Mater., 85, 1-8. https://doi.org/10.1016/j.conbuildmat.2015.03.026
  20. Karakoc, C. (1985), Aderans Mekanik Etkilesim Olayi, ITU Mimarlik Fakultesi Baski Atolyesi.
  21. Karatas, M., Turk, K., Acikgenc, M. and Ulucan, Z.C. (2010), "Effect of elazig region waste brick powder on strength and viscosity properties of self compacting mortar", Proceedings of the 9th International Congress on Advances in Civil Engineering, Trabzon, Turkey.
  22. Mohamed, H.A. (2011), "Effect of fly ash and silica fume on compressive strength of self-compacting concrete under different curing conditions", Ain Sham. Eng. J., 2(2), 79-86. https://doi.org/10.1016/j.asej.2011.06.001
  23. Naik, T.R., Singh, S., Sivasundaram, V. and Energy, M. (1989), Concrete Compressive Strength, Shrinkage and Bond Strength as Affected by Addition of Fly Ash and Temperature, The University of Wisconsin-Milwaukee, Milwaukee, Wisconsin, U.S.A.
  24. Sahin, S., Orung, I., Okuroglu, M. and Karadutlu, Y. (2008), "Properties of prefabricated building materials produced from ground pumice aggregate and binders", Constr. Build. Mater., 22(5), 989-992. https://doi.org/10.1016/j.conbuildmat.2006.11.025
  25. Sancak, E. and Simsek, O. (2013), "The bond strength of structural lightweight pumice aggregate concrete with/without silica fume", Proceedings of the International Balkans Conference on Challenges of Civil Engineering.
  26. Sahmaran, M., Christianto, H.A. and Yaman, I.O. (2006), "The effect of chemical admixtures and mineral additives on the properties of self-compacting mortars", Cement Concrete Compos., 28(5), 432-440. https://doi.org/10.1016/j.cemconcomp.2005.12.003
  27. Sonebi, M. (2004), "Medium strength self-compacting concrete containing fly ash: Modelling using factorial experimental plans", Cement Concrete Res., 34(7), 1199-1208. https://doi.org/10.1016/j.cemconres.2003.12.022
  28. Shetty, A., Venkataramana, K. and Narayan, K.S.B. (2014), "Flexural bond strength behaviour in OPC concrete of NBS beam for various corrosion levels", Struct. Eng. Mech., 49(1), 81-93. https://doi.org/10.12989/sem.2014.49.1.081
  29. Turk, K. and Yildirim, M.S. (2003), "Bond strength of reinforcement in splices in beams", Struct. Eng. Mech., 16(4), 469-478. https://doi.org/10.12989/sem.2003.16.4.469
  30. Turk, K. (2012), "Viscosity and hardened properties of selfcompacting mortars with binary and ternary cementitious blends of fly ash and silica fume", Constr. Build. Mater., 37, 326-334. https://doi.org/10.1016/j.conbuildmat.2012.07.081
  31. U.S. Geological Survey (2015), Mineral Commodity Summaries, Reston, Virginia, U.S.A., 196.
  32. Uysal, M. and Yilmaz, K. (2011), "Effect of mineral admixtures on properties of self-compacting concrete", Cement Concrete Compos., 33(7), 771-776. https://doi.org/10.1016/j.cemconcomp.2011.04.005
  33. Wen, Y.Q., Shen, X.D. and Cui, C. (2014), "Experimental study on the mechanical performance of pumice powder cement soil", Appl. Mech. Mater., 507, 383. https://doi.org/10.4028/www.scientific.net/AMM.507.383

피인용 문헌

  1. Effect of pumice powder and artificial lightweight fine aggregate on self-compacting mortar vol.27, pp.3, 2017, https://doi.org/10.12989/cac.2021.27.3.241
  2. The bond strength of self-compacting concrete exposed to elevated temperature vol.174, pp.9, 2017, https://doi.org/10.1680/jstbu.20.00105