DOI QR코드

DOI QR Code

Seismic evaluation of isolated skewed bridges using fragility function methodology

  • Bayat, M. (Young Researchers and Elite Club, Roudehen Branch, Islamic Azad University) ;
  • Daneshjoo, F. (Department of Civil and Environmental Engineering, Tarbiat Modares University) ;
  • Nistico, N. (Department of Structural and Geotechnical Engineering, Universita degli Studi di Roma "La Sapienza") ;
  • Pejovic, J. (Faculty of Civil Engineering, University of Montenegro)
  • 투고 : 2017.01.20
  • 심사 : 2017.05.13
  • 발행 : 2017.10.25

초록

A methodology, based on fragility functions, is proposed to evaluate the seismic performance of seismic isolated $45^{\circ}$ skewed concrete bridge: 1) twelve types of seismic isolation devices are considered based on two different design parameters 2) fragility functions of a three-span bridge with and without seismic isolation devices are analytically evaluated based on 3D nonlinear incremental dynamic analyses which seismic input consists of 20 selected ground motions. The optimum combinations of isolation device design parameters are identified comparing, for different limit states, the performance of 1) the Seismic Isolated Bridges (SIB) and 2) Not Seismic Isolated Bridge (NSIB) designed according to the AASHTO standards.

키워드

참고문헌

  1. AASHTO (2006), Recommended LRFD Guidelines for the Seismic Design of Highway Bridges, American of State Highway and Transportation Officials.
  2. AASHTO (2010), Guide Specifications for Seismic Isolation Design, American of State Highway and Transportation Officials.
  3. Alam, M.S., Bhuiyan, M.A.R. and Billah, A.H.M.M. (2012), "Seismic fragility assessment of SMA-bar restrained multi-span continuous highway bridge isolated by different laminated rubber bearings in medium to strong seismic risk zones", Bullet. Earthq. Eng., 10,1885-1909. https://doi.org/10.1007/s10518-012-9381-8
  4. Bayat, M., Daneshjoo, F. and Nistico, N. (2015b), "Probabilistic sensitivity analysis of multi-span highway bridges", Steel Compos. Struct., 19(1), 237-262. https://doi.org/10.12989/scs.2015.19.1.237
  5. Bayat, M., Daneshjoo, F. and Nistico, N. (2015c), "A novel proficient and sufficient intensity measure for probabilistic analysis of skewed highway bridges", Struct. Eng. Mech., 55(6), 1177-1202. https://doi.org/10.12989/sem.2015.55.6.1177
  6. Bayat, M., Daneshjoo, F. and Nistico, N. (2017), "The effect of different intensity measures and earthquake directions on the seismic assessment of skewed highway bridges", Earthq. Eng. Eng. Vibr., 16(1), 165-179. https://doi.org/10.1007/s11803-017-0375-z
  7. Bayat, M. and Daneshjoo, F. (2015a), "Seismic performance of skewed highway bridges using analytical fragility function methodology", Comput. Concrete, 16(5), 723-740. https://doi.org/10.12989/cac.2015.16.5.723
  8. Bessason, B. and Haflidason, E. (2004), "Recorded and numerical strong motion response of a base-isolated bridge", Earthq. Spectr., 20(2), 309-332. https://doi.org/10.1193/1.1705656
  9. Billah, A.H.M.M. and Alam, M.S. (2014), "Seismic fragility assessment of highway bridges: A state-of-the-art review", Struct. Infrastruct. Eng.: Mainten. Manage. Life-Cycle Des. Perform., 11(6), 804-832. https://doi.org/10.1080/15732479.2014.912243
  10. Cardone, D. (2014), "Displacement limits and performance displacement profiles in support of direct displacement-based seismic assessment of bridges", Earthq. Eng. Struct. Dyn., 43, 1239-1263. https://doi.org/10.1002/eqe.2396
  11. Choi, E., DesRoches, R. and Nielson, B. (2004), "Seismic fragility of typical bridges in moderate seismic zones", Eng. Struct., 26, 187-199. https://doi.org/10.1016/j.engstruct.2003.09.006
  12. Constantinou, M.C., Kartoum, A., Reinhorn, A.M. and Bradford, P. (1992), "Sliding isolation system for bridges: Experimental study", Earthq. Spectr., 8, 321-344. https://doi.org/10.1193/1.1585684
  13. Dicleli, M. and Buddaram S. (2006), "Effect of isolator and ground motion characteristics on the performance of seismic-isolated bridges", Earthq. Eng. Struct. Dyn., 35, 233-250. https://doi.org/10.1002/eqe.522
  14. Erberik, M. and Elnashai, A. (2004), "Fragility analysis of flat-slab structures", Eng. Struct., 26, 937-948. https://doi.org/10.1016/j.engstruct.2004.02.012
  15. FEMA P695 (2009), Quantification of Building Seismic Performance Factors, Washington, U.S.A.
  16. Ghobarah, A. and Ali, H.M. (1988), "Seismic performance of highway bridges", Eng. Struct., 10, 157-166. https://doi.org/10.1016/0141-0296(88)90002-8
  17. HAZUS (2003), Technical Manual, Earthquake Model, National Institute of Building Sciences Prepared for Federal Emergency Management Agency, Washington, U.S.A.
  18. Hwang, H., Liu, J. and Chiu, Y. (2001), Seismic Fragility Analysis of Highway Bridges, Center for Earthquake Research and Information, Technical Report, University of Memphis, Memphis, U.S.A.
  19. Jangid, R.S. (2005), "Optimal friction pendulum system for near-fault motions", Eng. Struct., 27, 349-359. https://doi.org/10.1016/j.engstruct.2004.09.013
  20. Joyner, W.B. and Boore, D.M. (1993), "Methods for regression analysis of strong motion data", Bullet. Seismol. Soc. Am., 83(2), 469-487.
  21. Karim, K.R. and Yamazaki, F. (2001), "Effect of earthquake ground motions on fragility curves of highway bridge piers based on numerical simulation", Earthq. Eng. Struct. Dyn., 30, 1839-1856. https://doi.org/10.1002/eqe.97
  22. Karim, K.R. and Yamazaki, F. (2007), "Effect of isolation on fragility curves of highway bridges based on simplified approach", Soil Dyn. Earthq. Eng., 27, 414-426. https://doi.org/10.1016/j.soildyn.2006.10.006
  23. Kim, W.S., Ahn, D.J. and Lee, J.K. (2014), "A study on the seismic isolation systems of bridges with lead rubber bearings", Open J. Civil Eng., 4, 361-372. https://doi.org/10.4236/ojce.2014.44031
  24. Kunde, M.C. and Jangid, R.S. (2006), "Effects of pier and deck flexibility on the seismic response of isolated bridges", J. Brid. Eng., 11, 109-121. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:1(109)
  25. Lu, Y., Gu, X. and Guan, J. (2005), "Probabilistic drift limits and performance evaluation of reinforced concrete columns", J. Struct. Eng., 131(6), 966-978. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:6(966)
  26. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  27. Naeim, F. and Kelly, J.M. (1999), Design of Seismic Isolated Structures: From Theory to Practice, John Willey and Sons, Inc., New York, U.S.A.
  28. Nielson, B.G. and DesRoches, R. (2007), "Seismic fragility methodology for highway bridges using a component level approach", Earthq. Eng. Struct. Dyn., 36, 823-839. https://doi.org/10.1002/eqe.655
  29. Nielson, G.B. (2005), "Analytical fragility curves for highway bridges in moderate seismic zones", Ph.D. Dissertation, Georgia Institute of Technology, Georgia, U.S.A.
  30. Padgett, J.E., Nielson, B.G. and DesRoches, R. (2008), "Selection of optimal intensity measures in probabilistic seismic demand models of highway bridge portfolios", Earthq. Eng. Struct. Dyn., 37711-37725.
  31. Padgett, J.E. and DesRoches, R. (2008), "Methodology for the development of analytical fragility curves for retrofitted bridges", Earthq. Eng. Struct. Dyn., 37, 157-174.
  32. Park, K.S., Jung, H.J. and Lee, I.W. (2002), "A comparative study on a seismic performance of base isolation systems for multi-span continuous bridge", Eng. Struct., 24, 1001-1013. https://doi.org/10.1016/S0141-0296(02)00020-2
  33. Paulay, T. and Priestley, N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, Wiley, New York, U.S.A.
  34. Priestley, M.J.N., Seible, F. and Calvi, C.M. (1996), Seismic Design and Retrofit of Bridges, John Wiley & Sons, New York, U.S.A.
  35. Robson, B.N., Harik, I.E. and Gupta, V. (2001), "Effectiveness of seismic isolation of highly skewed P/C I-girder bridge", J. Brid. Eng., 6(3), 221-224. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:3(221)
  36. SAP2000 (2012), Integrated Structural Analysis and Design Software, Computers and Structures Inc.
  37. Shafieezadeh, A., Ramanathan, K., Padgett, J.E. and DesRoches, R. (2012), "Fractional order intensity measures for probabilistic seismic demand modeling applied to highway bridges", Earthq. Eng. Struct. Dyn., 41, 391-409. https://doi.org/10.1002/eqe.1135
  38. Shen, J., Tsai, M.H., Chang, K.C. and Lee, G.C. (2004), "Performance of a seismically isolated bridge under near-fault earthquake ground motions", J. Struct. Eng., 130(6), 861-868. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:6(861)
  39. Shinozuka, M., Feng, M.Q., Kim, H. and Kim, S.H. (2000), "Nonlinear static procedure for fragility curve development", J. Eng. Mech., 126(12), 1287-1295. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:12(1287)
  40. Shome, N. and Cornell, C.A. (1999), Probabilistic Seismic Demand Analysis of Nonlinear Structures, RMS Report 35 Reliability of Marine Structures Group, Stanford University, Stanford, U.S.A.
  41. Yi, J.H., Kim, S.H. and Kushiyama, S. (2007), "PDF interpolation technique for seismic fragility analysis of bridges", Eng. Struct., 29, 1312-1322. https://doi.org/10.1016/j.engstruct.2006.08.019
  42. Zhang, J. and Huo, Y. (2009), "Evaluating effectiveness and optimum design of isolation devices for highway bridges using the fragility function method", Eng. Struct., 311648-31660.

피인용 문헌

  1. Estimation of inter-story drifts at onset of damage states for RC high-rise buildings vol.21, pp.1, 2017, https://doi.org/10.12989/eas.2021.21.1.063