Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

A study on the Dynamic Behavior Enhancement of the Korean High-speed Train

고속열차의 주행동특성 개선에 관한 연구

  • Jeon, Chang-Sung (High-speed Railroad Systems Research Team, Korea Railroad Research Institute)
  • 전창성 (한국철도기술연구원 고속열차연구팀)
  • Received : 2017.09.08
  • Accepted : 2017.10.13
  • Published : 2017.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes the dynamic behavior and enhancement of Korean high-speed trains. The tail vibration reduction method of the yaw damper installation method change, which was derived from previous research, was applied to the running test of high-speed train. In addition, the vibration reduction method for the entire vehicle was derived by a numerical method and its effect was confirmed by a running test. The improved design was applied to the double-deck high-speed train coaches and the commissioning proceeded without problems in dynamic behavior. Sensitivity analysis of the suspension parameters affecting the critical speed of Korean next-generation high-speed trains was performed and four design variables that greatly affected the critical speed were derived. These were in the order of the primary elastic joint x-directional stiffness, the secondary yaw damper series stiffness, the secondary lateral damper damping coefficient, and the carbody damper damping coefficient. By optimizing the design variables, the suspension parameter that improves the critical speed by 23.3% can be used in the commercial designs of Korean next-generation high-speed trains.

본 연구는 고속열차 시운전 시험과 이에 따른 주행동특성 고찰 및 개선에 관한 것이다. 고속열차 시운전 시험을 통한 선행 연구에서 도출한 요댐퍼 설치 방법에 따른 후미 진동 개선 방안을 실제 고속철도 차량의 시운전시에 적용하여 후미 진동 저감 효과가 있음을 확인하였다. 또한 전체 차량에 대한 진동저감 방안을 동역학 해석 소프트웨어를 사용하여 수치 해석적 방법으로 도출하였으며, 그 효과를 시운전 시험을 통하여 확인하였다. 개선된 설계안은 실제 2층 고속열차 객차에 적용되어 주행동특성 문제없이 시운전을 진행하였다. 차세대 고속열차 임계속도에 영향을 미치는 현가장치 파라미터들에 대한 민감도 분석을 수행하였으며, 임계속도에 크게 영향을 미치는 4개의 설계변수를 도출하였는데, 이는 1차 탄성조인트 열차진행 방향 강성, 2차 요댐퍼 시리즈 강성, 2차 횡댐퍼 댐핑계수, 차간 댐퍼 댐핑계수 순이었다. 이 설계변수에 대한 최적화를 통하여 임계속도를 23.3% 향상시키는 현가장치 파라미터를 제시하였으며, 이는 차세대 고속열차 상용화 모델의 설계에 이용될 수 있다.

Keywords

References

  1. S. W. Kim, C. S. Park, S.Y. Kwon et al., "Research on Commissioning Test of 430km/h High-speed Train," Infrastructure R&D Report 15PRTD-B063984-04, Ministry of Land, Infrastructure and Transport, 2015.
  2. S. G. Baek, R. M. Lee, B. S. Shin et al., "Vibration Reduction of the High-speed EMU for Improvement of Ride Comfort," Proceedings of the Korean Society for Railway Autumn Conference, pp. 1435-1440, 2008.
  3. C. K. Park, Y. G. Kim, K.K. Kim et al., "Analysis of the Suspension Characteristics for Next Generation High Speed Train Formed with 6 Cars in Concept Design Stage," Proceedings of the Korean Society for Railway Autumn Conference, pp. 387-392, 2008.
  4. C. K. Park, S. S. Kim, K. K. Kim et al., "Optimization of Non-linear Characteristics of the secondary dampers for the High Speed Electrical Multiple Train," Proceedings of the Korean Society for Railway Autumn Conference, pp. 2568-2572, 2009.
  5. K. S. Sim, T. W. Park, J. H. Lee et al., "An Evaluation on Derailment according to Running Safety of Next-Generation High Speed Train (HEMU-430X)," Journal of the Korean Society for Railway, vol. 15, no. 4, pp. 343-351, 2012. DOI: https://doi.org/10.7782/JKSR.2012.15.4.343
  6. UIC, "Testing and approval of railway vehicles from the point of view of their dynamic behaviour - Safety - Track fatigue - Ride quality," UIC CODE 518 OR, 2009.
  7. C. S. Jeon, Y. G. Kim, S. W. Kim et al., "A Study on Tail Vibration Reduction for the Next Generation High Speed EMU," Journal of the Korean Society for Railway, vol. 15, no. 6, pp. 543-549, 2012. DOI: https://doi.org/10.7782/JKSR.2012.15.6.543
  8. Resonate Group Limited. VAMPIRE Pro V6.40 users' manual, 2017.
  9. C. S. Jeon, Y. G. Kim, J. H. Park et al., "A study on the dynamic behavior of the Korean next-generation high-speed train," Proc IMechE Part F: J Rail and Rapid Transit, vol. 230, no. 4, pp. 1053-1065, 2015. DOI: https://doi.org/10.1177/0954409715576355
  10. EN 14363 : 2005. Railway applications - acceptance of running characteristics of railway vehicles-testing of running behaviour and stationary tests.
  11. Simon Iwnicki, "Handbook of Railway Vehicle Dynamics," Taylor & Francis, pp. 385-395, 2006.
  12. C. S. Jeon, "A study on Critical Speed Enhancement of High-speed Train Passenger Car," Journal of the Korean Academia-Industrial cooperation Society, vol. 17, no. 12, pp. 603-610, 2016. DOI: http://dx.doi.org/10.5762/KAIS.2016.17.12.603
  13. R. L. Plackett, J. P. Burman, "The Design of Optimum Multifactorial Experiments," Biometrika, vol. 33, no. 4, pp. 305-325, 1946. DOI: https://doi.org/10.1093/biomet/33.4.305
  14. S. H. Park, "Design of Experiments," Minyoung Publishing Co., 2009.
  15. R. H. Myers, D. C. Montgomery. Response Surface Methodology: Process and Product Optimization Using Designed Experiments. John Wiley & Sons, Inc. 1995.
  16. S. S. Rao. Engineering Optimization: Theory and Practice. John Wiley & Sons, Inc. 1996.