DOI QR코드

DOI QR Code

A Study on the Selection of GPR Type Suitable for Road Cavity Detection

도로동공 탐지에 적합한 GPR 타입 선정에 관한 연구

  • 김연태 (한국건설기술연구원 도로연구소) ;
  • 최지영 (한국건설기술연구원 도로연구소) ;
  • 김기덕 (세종대학교 건설환경공학과) ;
  • 박희문 (한국건설기술연구원 도로연구소)
  • Received : 2017.08.11
  • Accepted : 2017.09.13
  • Published : 2017.10.16

Abstract

PURPOSES : The purpose of this study is to evaluate different types of Ground Penetrating Radar (GPR) testing for characterizing the road cavity detection. The impulse and step-frequency-type GPR tests were conducted on a full-scale testbed with an artificial void installation. After analyzing the response signals of GPR tests for detecting the road cavity, the characteristics of each GPR response was evaluated for a suitable selection of GPR tests. METHODS : Two different types of GPR tests were performed to estimate the limitation and accuracy for detecting the cavities underneath the asphalt pavement. The GPR signal responses were obtained from the testbed with different cavity sizes and depths. The detection limitation was identified by a signal penetration depth at a given cavity for impulse and step-frequency-type GPR testing. The unique signal characteristics was also observed at cavity sections. RESULTS : The impulse-type GPR detected the 500-mm length of cavity at a depth of 1.0 m, and the step-frequency-type GPR detected the cavity up to 1.5 m. This indicates that the detection capacity of the step-frequency type is better than the impulse type. The step-frequency GPR testing also can reflect the howling phenomena that can more accurately determine the cavity. CONCLUSIONS :It is found from this study that the step-frequency GPR testing is more suitable for the road cavity detection of asphalt pavement. The use of step-frequency GPR testing shows a distinct image at the cavity occurrences.

Keywords

References

  1. Alan. V. Oppenheim, Alan. S. Willsky. (1999). Signals and Systems, pp.394-395.
  2. Al-Qadi, I. L., Leng, Z., Lahouar, S., Baek, J. (2014). In-Place Hot-Mix Asphalt Density Estimation Using Ground-Penetrating Radar, Transportation Research Record, Vol.2152, pp.19-27.
  3. Andrew. J. Wilkinson, Richard. T. Lord, and Michael. R. Inggs. (1998). Stepped-frequency processing by reconstruction of target reflectivity spectrum, South African Symp. on Communication and Signal Processing, pp.101-104.
  4. Brian R. Phelan, Marc A. Ressler, Gregory J. Mazzaro, Kelly D. Sherbondy, and Ram M. Narayanan. (2013). Design of Spectrally Versatile Forward-Looking Ground Penetrating Radar for Detection of Concealed Targets, The International Society for Optics and Photonics, Vol. 8714.
  5. David. A. Noon. (1996). Stepped- frequency radar design and signal processing enhances ground penetrating radar performance, Doctoral thesis, University of Queensland, AU.
  6. David J. Daniels. (2005). Ground Penetrating Radar. Encyclopedia of RF and Microwave Engineering. John Willy & Sons, Inc.
  7. David, J. Daniels, (1996). Surface Penetrating Radar, The Institution of Electrical Engineers, Vol.8, Issue.4, pp.165-182.
  8. Federal Highway Administration Research and Technology (2010). Step Frequency Ground Penetrating Radar Charaterization and Federal Evaluation Tests, Research Report.
  9. Kim, Yeon Tae, Kim, Booil, Kim, Je Won, Park, Hee Mun. (2016). Determining the Optimal Frequency of Ground Penetrating Radar for Detecting Voids in Pavements, International Journal of Highway Engineering, Vol. 18, No. 2. pp.37-42. https://doi.org/10.7855/IJHE.2016.18.2.037
  10. Neil Linford, Paul Linford, Louise Martin, Andy Payne. (2010). Stepped frequency ground-penetrating radar survey with a multi-element array antenna: Results from field application on archaeological sites, Vol. 17, Issue 3. pp.187-198. https://doi.org/10.1002/arp.382
  11. Park, Jeong Jun, Han, Jung Geun, Yoo, Seung Kyeong, Hong, Ki Gwon. (2015). GPR technology for exploring road cavity in the ground, Journal of the Korean geosynthetics society, Vol.14, No.3. pp.12-17.

Cited by

  1. Exploration of Underground Cavity Using Portable Small-loop Electromagnetic Method vol.20, pp.6, 2018, https://doi.org/10.7855/IJHE.2018.20.6.041