DOI QR코드

DOI QR Code

Investigation of Occupational EMF Exposure Assessment System

직업인 전자파 노출 평가제도 연구

  • Jeon, Sang Bong (Radio Environment & Monitoring Research Group, ETRI) ;
  • Lee, Ae-Kyoung (Radio Environment & Monitoring Research Group, ETRI) ;
  • Kwon, Yong-Ki (EMF Environment Safety Division, National Radio Research Agency) ;
  • Jang, Ju-Dong (EMF Environment Safety Division, National Radio Research Agency) ;
  • An, Juno (Institute for Future Radio Engineering) ;
  • Pack, Jeong-Ki (Department of Radio Science and Engineering, Chungnam National University) ;
  • Gimm, Youn-Myoung (Department of Electronics and Electrical Engineering, Dankook University) ;
  • Choi, Hyung-Do (Radio Environment & Monitoring Research Group, ETRI)
  • 전상봉 (한국전자통신연구원 전파환경감시연구그룹) ;
  • 이애경 (한국전자통신연구원 전파환경감시연구그룹) ;
  • 권용기 (국립전파연구원 전파환경안전과) ;
  • 장주동 (국립전파연구원 전파환경안전과) ;
  • 안준오 (미래전파공학연구소) ;
  • 백정기 (충남대학교 전파공학과) ;
  • 김윤명 (단국대학교 전자전기공학과) ;
  • 최형도 (한국전자통신연구원 전파환경감시연구그룹)
  • Received : 2017.09.28
  • Accepted : 2017.10.27
  • Published : 2017.11.30

Abstract

Recently, as the WHO IARC has classified radio frequency electromagnetic fields as possibly carcinogenic (group 2B) to humans, there is increasing concern about the health effects of overexposure from electromagnetic fields. Especially, the workers are exposed to higher level of electromagnetic radiation than the general public. As a result, in Europe, the protection guidelines for the worker are developed and the exposure of the worker is strictly controlled. In this paper, the EU directive, standards and guidelines of the EMF exposure for the worker were reviewed, and the exposure assessment of EMF was performed for the arc welding. Based on that, we propose a way to introduce a national policy to protect the workers from EMF exposure in working environment.

최근 WHO IARC에서 무선주파수 전자파를 발암 유발 가능 물질(2B 등급)으로 분류함에 따라 전자파로부터의 과다노출로 인한 건강 영향에 대한 우려가 증가하고 있다. 특히 직업인의 경우는 일반인에 비해 전자파에 더 많이 노출될 수밖에 없는 환경에서 근무하게 된다. 이로 인해 유럽에서는 직업인에 대한 전자파 인체보호를 위한 지침을 마련하여 직업인에 대해 엄격히 관리하고 있다. 본 논문에서는 EU의 직업인 보호 관련 법령, 표준 및 지침을 분석하고, 또한 실제 아크용접에 대한 직업인 전자파 노출 평가를 수행하였다. 이를 토대로 직업인 보호를 위한 국내 제도 도입 방안을 제시하였다.

Keywords

References

  1. WHO Press Release no. 208, "IARC classifies radiofrequency electromagnetic fields as possibly carcinogenic to humans", May 2011.
  2. 방송통신위원회 전파연구소, EMF 용어사전, 한국전자파학회, p. 352, 2009년 11월.
  3. Directive 2013/35/EU of the European Parliament and of the Council of 26 June 2013 on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields) and repealing Directive 2004/40/EC, Official Journal of the European Union, 2013.
  4. Council Directive of 12 June 1989 on the introduction of measures to encourage improvements in the safety and health of workers at work (89/391/EEC), Council of the European Union, 1989.
  5. Directive 2004/40/EC of the european parliament and of the council of 29 April 2004 on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields), Official Journal of the European Union, Apr. 2004.
  6. ICNIRP, "Guide for limiting exposure to time-varying electric, magnetic, and electromagentic fields (up to 300 GHz)", Health Physics, vol. 74 no. 4, pp. 494-522, Apr. 1998.
  7. ICNIRP, "Guide for limiting exposure to time-varying electric, magnetic, and electromagentic fields (1 Hz to 100 kHz)", Health Physics, vol. 99 no. 6, pp. 818-836, Dec. 2010.
  8. D. Figueroa, "Italy: Health and safety standards for workers exposed to electromagnetic fields", Sep. 2016.
  9. http://www.who.int/peh-emf/project/mapnatreps/FRANCE_2015.pdf
  10. Act on the Implementation of Measures of Occupational Safety and Health to Encourage Improvements in the Safety and Health Protection of Workers at Work, 2016.
  11. A Guide to the Control of Electromagnetic Fields At Work Regulations 2016, HSG281, Jul. 2016.
  12. EMF-NET Main Task MT2 WORKEN - Deliverable D49, "Final technical report on occupational EMF exposure", 24th, Apr. 2008.
  13. Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for arc welding and allied processes, BS EN50444, 2008.
  14. S. B. Jeon et al., "Occupational exposure assessment using induced current density based on the waveform of a welding current pulse", BioEM2016, Belgium, pp. 528-530, Jun. 2016.
  15. 과학기술정보통신부 고시 제2013-118호, "전자파인체보호기준" 2013년 8월.