Journal of the Korean Wood Science and Technology

The Korean Society of Wood Science & Technology (한국목재공학회)
권호 표지
DOI QR코드

DOI QR Code

Bending Creep Property of Cross-Laminated Woods Made With Six Domestic Species

  • Byeon, Jin-Woong (Division of Environmental Forest Science, Institute of Agriculture & Life Science, Gyeongsang National University) ;
  • Kim, Tae-Ho (Division of Environmental Forest Science, Institute of Agriculture & Life Science, Gyeongsang National University) ;
  • Yang, Jae-Kyung (Division of Environmental Forest Science, Institute of Agriculture & Life Science, Gyeongsang National University) ;
  • Byeon, ee-Seop (Division of Environmental Forest Science, Institute of Agriculture & Life Science, Gyeongsang National University) ;
  • Park, Han-Min (Division of Environmental Forest Science, Institute of Agriculture & Life Science, Gyeongsang National University)
  • Received : 2017.07.11
  • Accepted : 2017.08.20
  • Published : 2017.11.25
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, with the view to using effectively small and medium diameter Korean domestic woods as structural materials, cross-laminated woods were manufactured by using six species of Korean domestic softwoods and hardwoods, and bending creep properties were investigated for each species. The creep curves showed the shape of the exponential function plot, and the creep curves after 1 hour were able to estimate by fitting it to the power law. The initial and creep compliances of cross-laminated woods showed the higher values in wood species with a low density than in that with a high density. And by cross-laminating, the initial and creep compliances perpendicular to the grain considerably decreased, the extent of the decrease was found to be greater in creep deformation than in initial deformation. The creep anisotropies of cross-laminated woods were considerably decreased by cross-laminating. The relative creep of $C_{\bot}$ type composed of perpendicular-direction lamina in the faces decreased 0.59 - 0.64 times compared to that of $P_{\bot}$ type composed of perpendicular-direction laminae in all layers, and that for $C_{\parallel}$ type composed of parallel-direction laminae in the faces increased 1.5 - 1.6 times compared to that of $P_{\parallel}$ type composed of parallel-direction laminae in all layers.

Keywords

References

  1. Aratake, S., Morita, H., Arima, T. 2002. Creep of various structural members in ambient conditions I. Estimation of future deflections considering the longevity of wooden structures (in Japanese). Mokuzai Gakkaishi 48: 233-240.
  2. Arima, T., Sato, M., Mashita, K. 1981. Studies on evaluation method for long-term performance of wood-based materials and elements (in Japanese). Report of the Building Research Institute No.95: 25-80.
  3. Bryan, E.L., Schniewind, A.P. 1965. Strength and rheological properties of particleboard. Forest Products Journal 15: 143-148.
  4. Fushitani, M., Bono, Y. 1975. Bending creep of laminated woods (in Japanese). Wood Industry, Japan 30(5): 22-24.
  5. Gulzow, A., Richter, K., Stelger, R. 2011. Influence of wood moisture content on bending and shear stiffness of cross-laminated timber panels. European Journal of Wood and Wood Products 69: 193-197. https://doi.org/10.1007/s00107-010-0416-z
  6. Goto, T., Fukushima, A., Nakayama, S., Furono, T. 2014. Bending properties of missed-species, three-ply CLTs (Cross-Laminated Timbers) with inner layer of sugi. Mokuzai Gakkaishi 60: 336-345. In Japanese with summary in English. https://doi.org/10.2488/jwrs.60.336
  7. Gavric, I., Fragiacomo, M., Ceccotti, A. 2015a. Cyclic behavior of typical metal connectors for cross-laminated (CLT) structures. Materials and Structures 48: 1841-1857. https://doi.org/10.1617/s11527-014-0278-7
  8. Gavric, I., Fragiacomo, M., Ceccotti, A. 2015b. Cyclic behavior of typical screwed connections for cross-laminated (CLT) structures. European Journal of Wood and Wood Products 73: 179-191. https://doi.org/10.1007/s00107-014-0877-6
  9. Hoyle, R.J., Itani, R.Y., Anderson, J.T. 1994. The effect of moisture cycling on creep of small glued laminated beams. Wood and Fiber Science 26: 556-562.
  10. Ido, H., Nagao, H., Miura, S., Miyatake, A. 2014. Compressive strength properties perpendicular to the grain of cross-laminated timber (CLT) composed of sugi laminations. Mokuzai Gakkaishi 60: 16-22. In Japanese with summary in English. https://doi.org/10.2488/jwrs.60.16
  11. Korea Forest Service. 2016. 2016 Annual report on forests and forestry. pp. 3-4.
  12. Moriizumi, S. 1981. Creep properties of wood-based boards under plate shear test (in Japanese). Journal of the Hokkaido Forest Products Research Institute No.359: 6-14.
  13. Moslemi, A.A. 1964. Some aspects of viscoelastic behavior of hardboard. Forest Products Journal 14: 337-342.
  14. Nakashima, S., Kitamori, A., Komatsu, K. 2014. Embedment and shear strengths of cross laminated timber and their dependence on angular orientation. Mokuzai Gakkaishi 60: 216-226. In Japanese with summary in English. https://doi.org/10.2488/jwrs.60.216
  15. Nakai, T. 1978. Bending creep test on wood-based boards I (in Japanese). Wood Industry, Japan 33: 158-160.
  16. Okabe, M., Yasumura, M., Kobayashi, K., Fujita, K. 2014. Prediction of bending stiffness and moment carrying capacity of sugi cross-laminated timber. Journal of Wood Science 60: 49-58. https://doi.org/10.1007/s10086-013-1377-8
  17. Okuma, M., Tashiro, H. 1968. Effect of adhesive on creep of plywood (in Japanese). Wood Industry, Japan 23: 168-170.
  18. Park, H.M., Fushitani, M. 2014. Calculations of shear moduli of three-ply cross-laminated wood panels from shear moduli of individual laminae. Wood and Fiber Science 46: 195-205.
  19. Park, H.M., Fushitani, M. 2006. Effects of component ratio of the face and core laminae on static bending strength performances of three-ply cross-laminated wood panels made with sugi (Cryptomeria japonica). Wood and Fiber Science 38: 278-291.
  20. Park, H.M., Fushitani, M., Byeon, H.S. 2009. Derivation of an equation for calculating shear modulus of three-ply laminated material beam from shear moduli of individual laminae and its application. Journal of Wood Science 55: 181-189. https://doi.org/10.1007/s10086-008-1023-z
  21. Park, H.M., Fushitani M., Byeon H.S., Yang J.K. 2016. Static bending strength performances of cross-laminated wood panels made with six species. Wood and Fiber Science 48: 68-80.
  22. Park, H.M., Fushitani M., Kubo T., Sato K., Byeon H.S. 2002. Bending creep performance of cross-laminated sugi wood. Mokuzai Gakkaishi 48: 166-177. In Japanese with summary in English.
  23. Park, H.M., Fushitani M., Ohtsuka T., Nakajima T., Sato K., Byeon H.S. 2001. Effect of annual ring angle on static bending strength performances of cross-laminated woods made with sugi wood. Mokuzai Gakkaishi 47: 22-32. In Japanese with summary in English.
  24. Park, H.M., Fushitani M., Sato K., Kubo T., Byeon H.S. 2006. Bending creep performances of three-ply cross-laminated woods made with five species. Journal of Wood Science 52: 220-229. https://doi.org/10.1007/s10086-005-0750-7
  25. Park, H.M., Fushitani M., Sato K., Kubo T., Byeon H.S. 2003. Static bending strength performances of cross-laminated woods made with five species. Journal of Wood Science 49: 411-417. https://doi.org/10.1007/s10086-002-0502-x
  26. Park, H.M., Kang D.H., Choi Y.E., Ahn S.Y., Ryu H.S., Byeon H.S. 2010. Bending creep performances of hybrid laminated woods composed of wood-wood based boards. Journal of the Korean Wood Science and Technology 38: 1-10. https://doi.org/10.5658/WOOD.2010.38.1.1
  27. Saito, F., Ikeda M., Ogawa K. 1980. Time-related flexural behavior of particleboards under long term load (in Japanese). Mokuzai Gakkaishi 26: 714-718.
  28. Schniewind, A.P. 1968. Recent progress in the study of the rheology of wood. Wood Science and Technology 2: 188-206. https://doi.org/10.1021/es60015a604
  29. Sebera, V., Muszynski L, Tippner J, Noyel M, Pisaneschi T, sundberg B. 2015. FE analysis panel subjected to torsion and verified by DIC. Materials and Structures 48: 451-459. https://doi.org/10.1617/s11527-013-0195-1
  30. Stelger, R., Gulzow A., Czaderski C., Howald M., Niemz P. 2012. Comparison of bending stiffness of cross-laminated solid timber derived by modal analysis of full panels and by bending tests of strip-shaped specimens. European Journal of Wood and Wood Products 70: 141-153. https://doi.org/10.1007/s00107-011-0521-7