DOI QR코드

DOI QR Code

Seismic behavior of steel reinforced concrete cross-shaped column under combined torsion

  • Chen, Zongping (College of Civil Engineering and Architecture, Guangxi University) ;
  • Liu, Xiang (College of Civil Engineering and Architecture, Guangxi University)
  • Received : 2017.07.21
  • Accepted : 2017.11.17
  • Published : 2018.02.25

Abstract

Experiments were performed to explore the hysteretic performance of steel reinforced concrete (SRC) cross-shaped columns. Nine specimens were designed and tested under the combined action of compression, flexure, shear and torsion. Torsion-bending ratio (i.e., 0, 0.14, 0.21) and steel forms (i.e., Solid - web steel, T - shaped steel, Channel steel) were considered in the test. Both failure processes and modes were obtained during the whole loading procedure. Based on experimental data, seismic indexes, such as bearing capacity, ductility and energy dissipation were investigated in detail. Experimental results suggest that depending on the torsion-bending ratio, failure modes of SRC cross-shaped columns are bending failure, flexure-torsion failure and torsion-shear failure. Shear - displacement hysteretic loops are fuller than torque - twist angle hysteretic curves. SRC cross-shaped columns exhibit good ductility and deformation capacity. In the range of test parameters, the existence of torque does not reduce the shear force but it reduces the displacement and bending energy dissipation capacity. What is more, the bending energy dissipation capacity increases with the rising of displacement level, while the torsion energy dissipation capacity decreases.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Anumolu, S., Abdelkarim, O.I. and Elgawady, M.A. (2016), "Behavior of hollow-core steel-concrete-steel columns subjected to torsion loading", J. Bridge Eng. ASCE 2016, 21(10), 04016070. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000923
  2. Arnold, C. (1980), "Building configuration: Characteristics for seismic design", Proceedings of the 7th World Conference on Earthquake Engineering, Istanbul, Turkey, September, 4, 589-592.
  3. Belarbi, A., Ayoub, A. and Greene, G. (2007), "Seismic performance of reinforced concrete bridge columns subjected to combined loading including torsion", Proceedings of Structural Engineering Research Frontiers, Long Beach, CA, USA, May, pp. 1-16.
  4. Chen, Z.P., Xu, J.J. and Chen, Y.L. (2016), "Axial compression ratio limit values for steel reinforced concrete (SRC) special shaped columns", Steel Compos. Struct., Int. J., 20(2), 295-316. https://doi.org/10.12989/scs.2016.20.2.295
  5. Deng, J.D., Ma. Z.J. and Liu, A. (2017), "Seismic performance of reinforced concrete bridge columns subjected to combined stresses of compression, bending, shear, and torsion", J. of Bridge Eng. ASCE 2017, 22(11), 04016070.
  6. Duan, X.N. and Chandler, A.M. (2010), "Seismic torsional response and design procedures for a class of setback frame buildings", Earthq. Eng. Struct. Dyn., 24(5), 761-777. https://doi.org/10.1002/eqe.4290240511
  7. Fang, L., Zhang, B. and Jin, G.F. (2015), "Seismic behavior of concrete-encased steel cross-shaped columns", J. Construct. Steel Res., 109, 24-33. https://doi.org/10.1016/j.jcsr.2015.03.001
  8. GB/T 50081-2002 (2002), Standard for test method of mechanical properties on ordinary concrete; China Building Industry Press, Beijing, China. [In Chinese]
  9. GB/T228.1 (2010), Metallic Materials-Tensile Testing - Part 1 Method of Test at Room Temperature; China Standards Press, Beijing, China. [In Chinese]
  10. GB50936 (2014), Technical code for concrete filled steel tubular structures; China Building Industry Press, Beijing, China. [In Chinese]
  11. Hsu, H.L. and Wang, C. (2000), "Flexural-torsional behaviour of steel reinforced concrete members subjected to repeated loading", Earthq. Eng. Struct. Dyn., 29(5), 667-682. https://doi.org/10.1002/(SICI)1096-9845(200005)29:5<667::AID-EQE930>3.0.CO;2-Y
  12. Hsu, H.L., Hsieh, J.C. and Juang, J. (2004), "Seismic performance of steel-encased composite members with strengthening cross-inclined bars", J. Construct. Steel Res., 60(3), 1663-1679. https://doi.org/10.1016/j.jcsr.2004.04.002
  13. Japan Building Standard Law (2002), Japan architecture center, Tokyo, Japan. [In Japanese]
  14. Koliopulos, P.K. and Chandler, A.M. (1995), "Stochastic linearization of inelastic seismic torsional response: Formulation and case studies", Eng. Struct., 17(7), 494-504. https://doi.org/10.1016/0141-0296(95)00052-9
  15. Li, B. and Pham, T.P. (2014), "Experimental study on the seismic response of L-shaped reinforced concrete columns", Proceedings of Structures Congress 2013: Bridging Your Passion with Your Profession, Pittsburgh, PA, USA, May, pp. 1673-1682.
  16. Li, Q. and Belarbi, A. (2012), "Performance based design approach for RC square bridge columns under combined loadings including torsion", Proceedings of Structure Congress 2012, Chicago, IL, USA, March, pp. 2223-2234.
  17. Li, Q. and Belarbi, A. (2013), "Damage assessment of square RC bridge columns subjected to torsion combined with axial compression, flexure, and shear", KSCE J. Civil Eng., 17(3), 530-539. https://doi.org/10.1007/s12205-013-0600-x
  18. Liang, Q.Q., Uy, B. and Liew, J.Y.R. (2008), "Local buckling of steel plates in concrete-filled thin-walled steel tubular beam-columns", Steel Construct., 63(3), 396-405.
  19. Liu, Z.Q., Xue, J.Y. and Zhao, H.T. (2016), "Seismic behavior of steel reinforced concrete special-shaped column-beam joints", Earthq. Struct., 11(4), 665-680. https://doi.org/10.12989/eas.2016.11.4.665
  20. Liu, Z.Q., Xue, J.Y. and Zhao, H.T. (2016), "Seismic behavior of steel reinforced concrete special-shaped column-beam joints", Earthq. Struct., 11(4), 665-680. https://doi.org/10.12989/eas.2016.11.4.665
  21. Mullapudi, T.R.S. (2013), "Seismic analysis of reinforced concrete structures subjected to combined axial, flexure, shear and torsional loads", J. Struct. Eng. ASCE 2013, 139(4), 561-573. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000680
  22. Nie, J.G., Wang, Y.H. and Fan, J.S. (2012), "Experimental study on seismic behavior of concrete filled steel tube columns under pure torsion and compression-torsion cyclic load", J. Construct. Steel Res., 79(1), 115-126. https://doi.org/10.1016/j.jcsr.2012.07.029
  23. Nie, J.G., Wang, Y.H. and Fan, J.S. (2013), "Experimental research on concrete filled steel tube columns under combined compression-bending-torsion cyclic load", Thin-Wall. Struct., 67(2), 1-14. https://doi.org/10.1016/j.tws.2013.01.013
  24. Otsuka, H., Takeshita, E. and Urakawa, Y. (2005), "Seismic performance and correlation characteristics of reinforced concrete columns subjected to torsional moment, bending moment/shear force and axial force", Proceedings-Japan Society of Civil Engineers, Volume 801, pp. 123-139.
  25. Patton, M.L. and Singh, K.D. (2012), "Numerical modeling of lean duplex stainless steel hollow columns of square, L-, T-, and +-shaped cross sections under pure axial compression", Thin-Wall. Struct., 53, 1-8. https://doi.org/10.1016/j.tws.2012.01.002
  26. Patton, M.L. and Singh, K.D. (2014), "Finite element modelling of concrete-filled lean duplex stainless steel tubular stub columns", Int. J. Steel Struct., 14(3), 619-632. https://doi.org/10.1007/s13296-014-3020-y
  27. Prakash, S., Belarbi, A. and You, Y.M. (2010), "Seismic performance of circular RC columns subjected to axial force, bending, and torsion with low and moderate shear", Steel Construct., 32(1), 46-59.
  28. Ramamurthy, L.N. and Khan, T.A.H. (1986), "Closure of L-Shaped Column Design for Biaxial Eccentricity", J. Struct. Eng., 112(10), 2360-2362. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:10(2360)
  29. Sun, R., Burgess, I.W. and Huang, Z. (2015), "Progressive failure modelling and ductility demand of steel beam-to-column connections in fire", Eng. Struct., 89(17), 66-78. https://doi.org/10.1016/j.engstruct.2015.01.053
  30. Tirasit, P. and Kawashima, K. (2007), "Seismic performance of square reinforced concrete columns under combined cyclic flexural and torsional loadings", J. Earthq. Eng., 11(3), 425-452. https://doi.org/10.1080/13632460601031813
  31. UBC (1997), Uniform Building Code; International Council of Building Officials (ICBO), CA, USA.
  32. Wang, P., Han, Q. and Du, X.L. (2014), "Seismic performance of circular RC bridge columns with flexure-torsion interaction", Soil Dyn. Earthq. Eng., 66, 13-30. https://doi.org/10.1016/j.soildyn.2014.06.028
  33. Xiang, P., Deng, Z.H. and Su, Y.S. (2017), "Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading", Adv. Struct. Eng., 20(3), 446-460. https://doi.org/10.1177/1369433216653841
  34. Yang, Y., Yang, H. and Zhang, S. (2010), "Compressive behavior of T-shaped concrete filled steel tubular columns", Int. J. Steel Struct., 10(4), 419-430. https://doi.org/10.1007/BF03215849
  35. Zhou, T., Chen, Z. and Liu, H. (2012), "Seismic behavior of special shaped column composed of concrete filled steel tubes", J. Construct. Steel Res., 75, 131-141. https://doi.org/10.1016/j.jcsr.2012.03.015
  36. Zuo, Z.L., Cai, J. and Yang, C. (2012), "Axial load behavior of L-shaped CFT stub columns with binding bars", Eng. Struct., 37, 88-98. https://doi.org/10.1016/j.engstruct.2011.12.042

Cited by

  1. Seismic behavior of reinforced concrete T-shaped columns under compression-bending-shear and torsion vol.20, pp.4, 2018, https://doi.org/10.12989/eas.2021.20.4.431