International journal of steel structures (국제강구조저널)

Korean Society of Steel Construction (한국강구조학회)
권호 표지
DOI QR코드

DOI QR Code

Cyclic Lateral Performance Evaluation of Precast Double-Skinned Composite Tubular Columns

  • Lee, Young Woong (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Seo, Jihye (Coastal Engineering Division, Korea Institute of Ocean Science and Technology) ;
  • Kim, Seungjun (Department of Construction Safety and Disaster Prevention Engineering, Daejeon University) ;
  • Kang, Young Jong (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Won, Deokhee (Coastal Engineering Division, Korea Institute of Ocean Science and Technology)
  • Received : 2017.05.17
  • Accepted : 2017.07.05
  • Published : 2018.03.31
⟨ Previous Next ⟩

Abstract

Recently, bridge construction technology has experienced great progress with the development of high-performance materials and new structural types. On the contrary, most attention has been primarily paid to cast-in-place technologies and material cost savings. Even so, cast-in-place methods may present environmental issues at the construction sites, which frequently cause conflicts with residents. Thus, to overcome such disadvantages, precast methods have been strongly developed and especially applied in the construction of bridge superstructures. However, this has not been the case for substructures. Still, previous works on the development of precast solutions for such type of structures have been devoted to the design of double-skinned composite tubular (DSCT) columns. These studies included the design and construction methodology of precast segmental bent caps, column-bent cap, column-segment, and column-foundation joints. In this paper, the cyclic performance of precast DSCT columns was extensively analyzed experimentally. For this purpose, two test specimens were prepared, depending on the type of the segments connection, namely a splice plate and a mortar-grouting joint.

Keywords

Acknowledgement

Supported by : National Research Foundation of Korea

References

  1. Eurocode, E. C. (2007). 3: Design of steel structures-Part 1.8: Brussels: European Committee for Standardization. DD ENV, 1-8.
  2. Han, T. H., Stallings, J. M., Kang, Y. J. (2010). "Nonlinear concrete model for double-skinned composite tubular columns." Construction and Building Materials, 24(12), pp. 2542-2553. https://doi.org/10.1016/j.conbuildmat.2010.06.001
  3. Kim, T.-H., Lee, H.-M., Kim, Y.-J., Shin, H.M. (2011). "Performance assessment of precast concrete segmental bridge columns with a shear resistant connecting structure." Engineering Structures, 32(5), pp. 1292-1303. https://doi.org/10.1016/j.engstruct.2010.01.007
  4. Lalit Kumar Varshney, K. A. Patel, Sandeep Chaudhary, A. K. Nagpal (2013). "Control of time-dependent effects in steel-concrete composite frames." International Journal of Steel Structures, 13(4), pp. 589-606. https://doi.org/10.1007/s13296-013-4002-1
  5. Mohamed El Gawady, Aaron J. Booker and Haitham M. Dawood (2010). "Seismic behavior of posttensioned concrete-filled fiber tubes." Journal of Composites For Construction, 14(5), pp. 616-628. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000107
  6. Olafur S. Haraldsson, Todd M. Janes, Marc O. Eberhard, and John F. Stanton (2013). "Seismic Resistance of Socket Connection between Foundation and Precast Column." Journal of Bridge Engineering, 18(9)
  7. Park, R. (1988). Ductility evaluation from laboratory and analytical testing, Proceeding of Ninth World Conference on Earthquake Engineering., Tokyo, Japan. Vol. 8.
  8. S. L. Billington, J. E. Breen (2000). "Improving standard bridges with attention to cast-in-place substructure." Journal of Bridge Engineering, 5(4), pp. 344-351. https://doi.org/10.1061/(ASCE)1084-0702(2000)5:4(344)
  9. S. L. Billington, R. W. Barnes, J. E. Breen (2001). "Alternate substructure systems for standard highway bridges." Journal of Bridge Engineering, 6(2), pp. 87-94. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:2(87)
  10. S. L. Billington, J. K. Yoon (2004). "Cyclic response of unbonded posttensioned precast columns with ductile fiber-reinforced concrete." Journal of Bridge Engineering, 9(4), pp. 353-363. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:4(353)
  11. Shim Chang-Su, Chung Young-Soo, Yoon Jae-Young (2011). "Cyclic behavior of prefabricated circular composite columns with low steel ratio." Engineering Structures, 33(9), pp. 2525-2534. https://doi.org/10.1016/j.engstruct.2011.04.024
  12. Shakir-Khalil H, Illouli S. (1987). Composite columns of concentric steel tubes. In: Proceeding of Conference on the Design and Construction of Non Conventional Structures, pp. 73-82.
  13. Sung-Bae Kim, Eun-Taik Lee, Jong-Rak Kim, Sang-Seup Kim (2016). "Experimental study on bending behavior and seismic performance of hybrid composite beam with new shape." International Journal of Steel Structures, 16(2), pp. 477-488 https://doi.org/10.1007/s13296-016-6018-9
  14. Tao Z, Han L-H, Zhao X-L. (2004). "Behavior of concretefilled double skin (CHS inner and CHS outer) steel tubular stub columns and beam columns." Journal of Constructional Steel Research, 60(8), pp. 1129-1158. https://doi.org/10.1016/j.jcsr.2003.11.008
  15. Tong, Z.S., Lin, X.G. (2005). "Basic behavior of centrifugal hollow concrete-filled steel tube (H-CFST) stub columns under axial compression." Korea Society of Steel Construction, 5, pp. 299-304.
  16. Wang Jui-Chen, Ou Yu-Chen, Chang Kuo-Chun, Lee George C. (2008). "Large-scale seismic tests of tall concrete bridge columns with precast segmental construction." Earthquake Engineering Structural Dynamics, 37(12), pp. 1449-1465 https://doi.org/10.1002/eqe.824
  17. Wei S, Mau ST, Vipulanandan C, Mantrala SK. (1997). "Performance of new sandwich tube under axial loading: Experiment." Journal of Structural Engineering, 121(12), pp. 1806-1814. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:12(1806)
  18. Won DH, Lee DJ, Kim SJ, Kang YJ (2011). "A study on behavior characteristics of precast coping part under axial load." Journal of the Korea Concrete Institute, 23(3), pp. 281-287 (in Korean) https://doi.org/10.4334/JKCI.2011.23.3.281
  19. Won DH, Han TH, Kim SJ, Kang YJ (2012). "Performance evaluation of the column-coping joint for prefabricated DSCT pier." Journal of Korea Society of Hazard Mitigation, 12(1) pp. 1-7 (in Korean)
  20. Won DH, Han TH, Lee DJ, Kang YJ (2010). "A study of pier-segment joint for fabricate internally confined hollow CFT pier." Journal of Korean Society of Steel Construction, 22(2), pp. 161-171 (in Korean)
  21. Xiao Jianzhuang, Xiao Huang, Luming Shen (2012). "Seismic behavior of semi-precast column with recycled aggregate concrete." Construction and Building Materials, 35, pp. 988-1001. https://doi.org/10.1016/j.conbuildmat.2012.04.062
  22. Zhao X-L, Grzebieta R. (2002). "Strength and ductility of concrete filled double skin (SHS inner and SHS outer) tubes." Thin-Walled Structures, 40(2), pp. 199-213. https://doi.org/10.1016/S0263-8231(01)00060-X
  23. Zhen Guo, Yingshu Yuan (2015). "Experimental study of steel plate composite shear wall units under cyclic load." International Journal of Steel Structures, 15(3), pp. 515-525. https://doi.org/10.1007/s13296-015-9001-y
  24. Zhu, Z., Ahmad, I., and Mirmiran, A. (2006). "Seismic performance of concrete-filled FRP tube columns for bridge substructure." J. Bridge Eng., 11(3), pp. 359-370. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:3(359)

Cited by

  1. An approach for partial strengthening of circular RC columns using outer steel tube vol.38, pp.6, 2018, https://doi.org/10.12989/scs.2021.38.6.739
  2. Effect of Solidification Mechanism of Nanometer Ore Powder Cement Soil on the Late Formation of Composite Foundation vol.219, pp.1, 2018, https://doi.org/10.1080/10584587.2021.1911366