Journal of the Korean Wood Science and Technology

The Korean Society of Wood Science & Technology (한국목재공학회)
권호 표지
DOI QR코드

DOI QR Code

Physical and Chemical Properties of Kapok (Ceiba pentandra) and Balsa (Ochroma pyramidale) Fibers

  • Purnawati, Renny (Department of Forest Products, Faculty of Forestry, Bogor Agricultural University) ;
  • Febrianto, Fauzi (Department of Forest Products, Faculty of Forestry, Bogor Agricultural University) ;
  • Wistara, I Nyoman J (Department of Forest Products, Faculty of Forestry, Bogor Agricultural University) ;
  • Nikmatin, Siti (Department of Physics, Faculty of Mathematics and Natural Science, Bogor Agricultural University) ;
  • Hidayat, Wahyu (Department of Forestry, Faculty of Agriculture, Lampung University) ;
  • Lee, Seung Hwan (Department of Forest Biomaterials Engineering, College of Forest and Environmental Science, Kangwon National University) ;
  • Kim, Nam Hun (Department of Forest Biomaterials Engineering, College of Forest and Environmental Science, Kangwon National University)
  • Received : 2018.05.17
  • Accepted : 2018.07.09
  • Published : 2018.07.25
Download PDF
⟨ Previous Next ⟩

Abstract

Natural fibers derived from lignocellulosic materials are considered to be more environment-friendly than petroleum-based synthetic fibers. Several natural fibers, such as seedpod fibers, have a potential for development, including kapok and balsa fibers. The characteristics of both fibers were evaluated to determine their suitability for specific valuable applications. The purpose of this study was to analyze some important fundamental properties of kapok and balsa fibers, including their dimensions, morphology, chemical components, and wettability. The results showed that the average fiber lengths for kapok and balsa were 1.63 and 1.30 cm, respectively. Kapok and balsa fibers had thin cell walls and large lumens filled with air. The kapok fiber was composed of 38.09% ${\alpha}-cellulose$, 14.09% lignin, and 2.34% wax content, whereas the balsa fiber was composed 44.62% ${\alpha}-cellulose$, 16.60% lignin, and 2.29% wax content. The characteristics of kapok and balsa fibers were examined by X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry analyses. The contact angle of the distilled water on kapok and balsa fibers was more than $90^{\circ}$, indicating that both fibers are hydrophobic with low wettability properties because of to the presence of wax on the fiber surface.

Keywords

References

  1. American Association of Textile Chemists and Colorists. 2012. AATCC Test Method 97. Extractable content of textiles. United States: AATCC Technical Manual.
  2. Browning, B.L. 1967. Methods of Wood Chemistry. Volume 2. New York: Interscience Publishing.
  3. Central Bureau of Statistics Republic of Indonesia (BPS). 2015. Area and production of community forest plantation by species (2000-2015). Jakarta (ID): Central Bureau of Statistics
  4. Chandrabakty, S. 2014. Fourier transform infrared (FT-IR) spectroscopy and tensile strength of melinjo's stem bark using modification of Weibull distribution. Jurnal Mekanikal (5): 434-442.
  5. Eun, D.J., Kwon, S.M., Kim, N.H. 2008. Variation of fine structure of wood cellulose within stems of 3 commercial softwoods species grown in Korea. Journal of the Korean Wood Science and Technology 36(1): 12-20.
  6. Fengel, D., Przyklenk, M. 1986. Studies on kapok 2. Chemical Investigation. Holzforschung 40: 325-330. https://doi.org/10.1515/hfsg.1986.40.6.325
  7. Gaan, S., Rupper, P., Salimova, V. 2009. Thermal decomposition and burning behavior of cellulose treated with ethyl ester phosphoramides: effect of alkyl substituent on nitrogen atom. Polymer Degradation and Stability 4(7): 1025-1134.
  8. Jin, LG., Wu, S.B., Lou, R. 2010. Kinetic study of the thermal decomposition of hemicellulose isolated from corn stalk. Bioresources 5(2): 1281-1291.
  9. Lee, S.H, Kwon, S.M., Um, G.J., Kim, N.H. 2008. Anatomical characteristics of kenaf grown in reclaimed land. Journal of the Korean Wood Science and Technology 36(4): 11-18.
  10. Likon, M., Remskar, M., Ducman, V., Svegl, F. 2013. Populus seed fibers as a natural source for production of oil super absorbents. Journal Environmental Management. 114:158-167.
  11. Lim, T.T., Huang, X. 2007. Evaluation of kapok (Ceiba pentandra (L.) Gaertn.) as a natural hollow hydrophobic-oleophilic fibrous sorbent for oil spill cleanup. Chemosphere 66: 955-963. https://doi.org/10.1016/j.chemosphere.2006.05.062
  12. Mani, G.K., Rayappan, J.B.B., Bisoyi, D.K. 2012. Synthesis and characterization of kapok fiber and its composites. Journal of Applied Science 12: 1661-1665. https://doi.org/10.3923/jas.2012.1661.1665
  13. Meiwu, S., Hong, X., Weidong, Y. 2010. The fine structure of the kapok fiber. Textile Research Journal 80(2): 159-165. https://doi.org/10.1177/0040517508095594
  14. Moran, J.I., Alvarez, V.A., Cyras, V.P., Vazquez, A. 2008. Extraction of cellulose and preparation of nanocellulose from sisal fibers. Cellulose (15): 149-159.
  15. Mwaikambo, L.Y. 2006. Review of the history, properties, and application of plant fibres. African Journal of Science and Technology 7: 120-133.
  16. Mwaikambo, L.Y., Ansell, M.P. 2002. Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization. Journal of Applied Polymer Science 84: 2222-2234. https://doi.org/10.1002/app.10460
  17. Nazir, M.S., Wahjoedi, B.A., Yussof, A.W., Abdullah, M.A. 2013. Eco-Friendly Extraction and Characterization of Cellulose from Oil Palm Empty Fruit Bunches. Bioresources 8(2): 2161-2172.
  18. Njobuenwu, D.O., Oboho, E.O., Gumus, R.H. 2007. Determination of contact angle from contact area of liquid droplet spreading on solid substrate. Leonardo Electronic Journal of Practices and Technologies 6(10): 29-38.
  19. Poletto, M., Zattera, A.J., Forte, M., Santana, R. 2012. Thermal decomposition of wood: influence of wood components and cellulose crystallite size. Bioresource Technology 109: 148-153. https://doi.org/10.1016/j.biortech.2011.11.122
  20. Poletto, M., Ornaghi, H.L., Zattera, A.J. 2014. Native cellulose: structure, characterization, and thermal properties. Materials 7: 6105-6119. https://doi.org/10.3390/ma7096105
  21. Purnawati, R., Febrianto, F., Wistara, N.J., Nikmatin, S., Sudirman, Marwanto, Kim, N.H. 2018. Alkaline treated-kapok and balsa fibers for composite reinforcement. JITKT 16(1): 21-31.
  22. Reddy, N., Yang, Y. 2004. Biofibers from agricultural byproducts for industrial applications. Trends in Biotechnology 23: 22-27.
  23. Rengasamy, R.S., Das, D., Karan, C.P. 2011. Study of oil sorption behavior of filled and structured fiber assemblies made from polypropylene, kapok, and milkweed fibers. Journal of Hazardous Materials 186: 526-532. https://doi.org/10.1016/j.jhazmat.2010.11.031
  24. Schellbach, S.L., Monteiro, S.N., Drelich, J.W. 2015. A novel method for contact angle measurements on natural fibers. Material Letters 164: 599-604.
  25. Segal, L., Creely, J.J., Martin, A.E., Conrad, C.M. 1959. An empirical method for estimating the degree of crystallinity of native cellulose using X-ray diffractometer. Textile Research Journal 29(10): 786-794. https://doi.org/10.1177/004051755902901003
  26. Smilgies, D.M. 2009. Scherrer grain-size analysis adapted to grazing-incidence scattering with area detectors. Journal Applied Crystallography 42(6): 1030-1034. https://doi.org/10.1107/S0021889809040126
  27. Smole, M.S., Hribernik, S., Kleinschek, K.S., Kreze, T. 2013. Plant Fibers for Textile and Technical Applications. Chapter 15. InTech Open. http://dx.doi.org/10.57772/52372
  28. Solikhin, A., Hadi, Y.S., Massijaya, M.Y., Nikmatin, S. 2016. Basic properties of oven-heat treated oil palm empty fruit bunch stalk fibers. Bioresources 11(1): 2224-2237.
  29. Suryadi, G.S. 2017. Studies of microstructure, thermal, mechanics, and surface properties of oil palm empty fruit bunches reinforced biocomposites. Thesis. Graduate School of Bogor Agricultural University (IPB), Bogor Indonesia.
  30. Technical Association of the Pulp and Paper Industry. 1988. TAPPI T204 om-88. Solvent extractives of wood and pulp. Atlanta: TAPPI Press.
  31. Technical Association of the Pulp and Paper Industry. 2002. TAPPI T211 om-02. Ash in wood, pulp, paper, and paperboard: combustion at $525^{\circ}C$. Atlanta: TAPPI Press.
  32. Technical Association of the Pulp and Paper Industry. 1988. TAPPI T222 om-88. Acid-insoluble lignin in wood and pulp. Atlanta: TAPPI Press.
  33. Veerakumar, A., Selvakumar, N. 2012. A preliminary investigation on kapok/polypropylene nonwoven composite for sound absorption. Indian Journal of Fibre and Textile Research (37): 385-388.
  34. Wang, J., Zheng, Y., Wang, A. 2012. Super hydrophobic kapok fiber oil-absorbent: preparation and high oil absorbency. Chemical Engineering Journal 213: 1-7. https://doi.org/10.1016/j.cej.2012.09.116
  35. Zheng, Y., Wang, J., Zhu, Y., Wang, A. 2015. Research and application of kapok fiber as an absorbing material: A mini review. Journal of Environmental Science 27: 21-32. https://doi.org/10.1016/j.jes.2014.09.026