DOI QR코드

DOI QR Code

Evaluation of Low Cycle Fatigue Damage of Gas Turbine Blades Used for a Long Time

장시간 사용된 가스터빈 블레이드의 저주기피로 손상도 평가

  • Heo, In Kang (Department of Mechanical Engineering, Chungnam National University) ;
  • Kim, Jae Hoon (Department of Mechanical Engineering, Chungnam National University)
  • Received : 2018.04.06
  • Accepted : 2018.06.21
  • Published : 2018.06.30

Abstract

Ni-base superalloy has excellent resistance to extreme environments such as high temperatures and high stresses and are used as materials for large gas turbines. In this paper, the specimens were taken from the blade that were used for a long time, and their life span was studied by microstructure analysis and avoidance of cursing. The microstructural analysis of the specimens was carried out using a OM and SEM to observe the coarsening, carbides on gamma prime. Low-cycle fatigue tests were performed on new material and airfoil of long time-used blade. The test was conducted under various deformation conditions and temperature conditions of $760^{\circ}C$ and $870^{\circ}C$. The low cycle fatigue test was carried out using the Coffin-Manson equation and the fatigue life was predicted. After the test, crack path and fracture surface were analyzed using SEM.

Keywords

References

  1. C. T. Sims and W. C. Hagel, John Wiley and Sons, Superalloy II. New York, 1987.
  2. J. C. Runkle and R. M. Pellous, Fatigue Mechanisms, ASTM STP 675, 1978.
  3. J. H. Yoo, "A Study of Strain Waveform Effect on Fatigue Life in High Temperature Low Cycle Fatigue Test", J. Korean Soc. Saf., Vol. 14, No. 1, pp. 41-48, 1999.
  4. H. Y. Yang, J. H. Kim, J. S. Ha, K. B. Yoo and G. C. Lee, "Low Cycle Fatigue Behavior of Cobalt-Base Superalloy ECY768 at Elevated Temperature", J. Korean Soc. Saf., Vol. 28, No. 3, pp. 18-22, 2013. https://doi.org/10.14346/JKOSOS.2013.28.3.018
  5. S. P. Zhu, H. Z., Huang, H. Li, R. Sun and M. J. Zuo, "A New Ductility Exhaustion Model for High Temperature Low Cycle Fatigue Life Prediction of Turbine Disk Alloys", International Journal of Turbo and Jet Engines, Vol. 28, No. 2, pp. 119-131, 2011. https://doi.org/10.1515/TJJ.2011.011
  6. S. H. Yang, M.. Y. Kim, S. Y. Park and S. H. Kim, "Effect of Heat Treatment on Microstructure and Mechanical Properties of the Nickel Base Superalloy GTD111DS", Journal of the Korean Society for Precision Engineering, Vol. 26, No. 3, pp.19-24, 2009.
  7. J. Y. Kim, D. H. Yoon, J. H., Kim, S. Y. Bae, S. Y. Chang and S, H. Chang, "Life Prediction of Low Cycle Fatigue for Ni-base Superalloy GTD 111 DS at Elevated Temperature", Transations of the Korean Society of Mechanical Engineers A, Vol. 41, No. 8, pp.765-770, 2017.
  8. L. J. Chen, P. K. Liaw, Y. H. He, M. L. Benson, J. W. Blust, P. F. Browning and D. L. Klarstrom, "Tensile Hold low-cycle Fatigue Behavior of Cobalt-based $HAYNES^{(R)}$ 188 superalloy", Scripta materialia, Vol. 44, No. 6, pp. 859-865, 2001. https://doi.org/10.1016/S1359-6462(00)00702-8
  9. B. H. Choe, J. H. Lee, H. M. Kim and H. C. Lee, "Low Cycle Fatigue Properties of Polycrystalline and Directionally Ssolidified CM247LC Superalloy", Korean Journal of Metals and Material Vol. 29, No. 6, pp. 618-625, 1991.
  10. J. A. Bannantine, J. J. Comer and J. L. Handrock, "Fundamentals of Metal Fatigue Analysis", Englewood Cliffs, NJ: Prentice-Hall, 1990.
  11. D. Hollander, D. Kulawinski, A. Weidner, M. Thiele, H. Biermann and U. Gampe, "Small-scale Specimen Testing for Fatigue Life Assessment of Service-exposed Industrial Gas Turbine Blades", International Journal of Fatigue, Vol. 92, pp.262-271, 2016. https://doi.org/10.1016/j.ijfatigue.2016.07.014
  12. J. Reuchet and L. Remy, "High Temperature Low Cycle Fatigue of MAR-M 509 Superalloy I: The Influence of Temperature on the Low Cycle Fatigue Behaviour from 20 to $1100^{\circ}C$", Materials Science and Engineering A, Vol. 58 pp. 19-32, 1983.
  13. M. Reger and L. Remy, "High Temperature, Low Cycle Fatigue of IN-100 Superalloy I: Influence of Temperature on the Low Cycle Fatigue Behaviour", Materials Science and Engineering A, Vol. 101 pp. 47-54, 1988. https://doi.org/10.1016/0921-5093(88)90049-4