DOI QR코드

DOI QR Code

Flexural Performance of Enhanced Spun High Strength RC Piles

원심성형 고성능 철근콘크리트 말뚝의 휨 성능 연구

  • Received : 2018.03.07
  • Accepted : 2018.05.14
  • Published : 2018.06.30

Abstract

The pile construction method is changing from the pile driving operation to the injected precast pile method. It is to prevent environmental damage and to minimize complaints caused by noise. Therefore, economic alternatives optimized for the injected precast pile method are required. In this study, the enhanced spun reinforced concrete piles manufactured by high strength materials were proposed. Experimental tests were conducted to evaluate their structural safety and nonlinear finite element analysis was performed to improve the reliability of experimental results. The experimental results and the analytical results were in good agreement with each other and the proposed enhanced spun reinforced concrete pile has better performance than that required by the design. However, the performance of the joint using the existing method used in the PHC pile was considered to be insufficient.

Keywords

References

  1. http://www.pre-cast.co.kr/
  2. S. H. Lee and D. M. Kim, "An Experimental Study on Behavior of Composite Pile", Journal of the Korean Geotechnical Society, Vol. 11, No. 2, pp. 23-32, 2010.
  3. J. H. Hyun, J. W. Bang, S. S. Lee and Y. Y. Kim, "Shear Strength Enhancement of Hollow PHC Pile Reinforced with Infilled Concrete and Shear Reinforcement", Journal of the Korea Concrete Institute, Vol. 24, No. 1, pp. 71-78, 2012. https://doi.org/10.4334/JKCI.2012.24.1.071
  4. J. H. Kim, Y. S. Park and C. S. Min, "Shear Experiment on Concrete Filled PHC Pile with Composite Shear Connectors with Rebar Holes", Journal of the Korea Concrete Institute, Vol. 29, No. 3, pp. 259-266, 2017. https://doi.org/10.4334/JKCI.2017.29.3.259
  5. KHBDC, Korea Highway Bridge Design Code: Limit states design method, 2015.
  6. Korean Industrial Standards, Pretensioned spun high strength concrete piles, KS F 4306.
  7. ABAQUS, Abaqus analysis user's manual version 6.9, Dassault Systemes Simulia Corp., 2009.
  8. E. Hognestad, A Study of Combined Bending and Axial Load in Reinforced Concrete Members, Bulletin 399, University of Illinois Engineering Experiment Station, Urbana, Ill., 1951.