DOI QR코드

DOI QR Code

Structural Characteristics Analysis of Stone Contact Surface according to Surface Roughness and Filling Material of Stone Pagoda Structure

석탑구조물의 표면거칠기 및 충전재에 따른 석재접촉면의 구조특성 분석

  • 김호수 (청주대학교 건축공학과) ;
  • 김동관 (청주대학교 건축공학과) ;
  • 이승희 (청주대학교 건축공학과) ;
  • 김덕문 (국립문화재연구소 안전방재연구실) ;
  • 조상순 (국립문화재연구소 안전방재연구실)
  • Received : 2018.04.24
  • Accepted : 2018.06.12
  • Published : 2018.06.30

Abstract

The stone pagoda structure is treated as a discontinuous masonry structure, and the contact surface characteristics between stones is a very important factor in the discontinuum behavior analysis. So, it is necessary to find out material and structural characteristics of stone contact surface to perform the structural analysis for safety evaluation. Accordingly, it is important to analyze the material properties of stone surface and secure the structural characteristics through various contact surface states. Therefore, in this study, various test specimens applying the filler between the surface roughness and the stone in the contact surface treatment technique of the stone pagoda were manufactured, and compression test and shear test were carried out. Also, we analyzed the material and structural characteristics of the stone contact surface through the comparison of experimental results.

Keywords

Acknowledgement

Supported by : 국립문화재연구소

References

  1. Hong, S. I., Shin, H. B., Kim, D. M., & Kim, H. S. (2011). Structural Behavior Evaluation according to Roughness of Discontinuum Surface of Stone Pagoda, Journal of the architectural institute of korea, Structure & Construction, 27(10), 63-70
  2. National Research Institute of Cultural Heritage(2017), Research on the Seismic Behavior Characteristics and Reinforcement Method of Stone Cultural Heritage.
  3. National Research Institute of Cultural Heritage(2016), A Study on Repair Techniques of Stone Architectural Heritage 2, Foundation and Stylobate of Stone Pagodas.
  4. National Research Institute of Cultural Heritage(2012), Mineral Material Research on Stone Pagoda in Miruk Temple Site.
  5. Kwag, J. Y., Lee, S. E., & Lim, H. U. (2003). Anisotropic Shear Strength of Artificially Fractured Rock Joints Under Low Normal Stress, Journal of Korean society for rock mechanics, Tunnel & underground space, 13(3), 169-179.
  6. Kim, Y. J., Lee, Y. H., & Do, S. K. (2004). Basic Study on Shear Characteristics of Filled Rock Joint, Journal of Korean society for rock mechanics, Tunnel & underground space, 14(5), 318-326.
  7. Barton, N. & Choubey, V. (1977). The shear strength of rock joints in theory and practice, Rock Mechanics, 10, 1-54. https://doi.org/10.1007/BF01261801
  8. Kim, D. K. (2017). The Influence of both Rock Joint Roughness and Normal Stress on Shear Strength, Master degree thesis, Cheongju University.
  9. Lee, M. H., Kim, J, W., & Chang, K. T. (2007). The Influence of Rock Joint Roughness and Normal Stress on Shear Behaviour, Journal of Korean society for rock mechanics, Tunnel & underground space, 17(3), 186-196.