Journal of the Korean Society of Mechanical Technology (한국기계기술학회지)

Korean Society of Mechanical Technology (한국기계기술학회)
권호 표지
DOI QR코드

DOI QR Code

Structural Analysis of Center Pillar according to Applied Load

인가 하중에 따른 센터필러의 구조해석

  • Received : 2018.06.07
  • Accepted : 2018.07.03
  • Published : 2018.08.30
⟨ Previous Next ⟩

Abstract

Prior to the experimental and production stages of the center pillar, a structural analysis must be carried out at the design stage. The commercial software for the structural analysis at the design stage provides benefits such as cost-effective and time economy. In this study, the structural analysis was performed to investigate the stress and displacement characteristics of the center pillar for five types of the applied loads using SolidWorks. The equivalent stress was relatively larger on the outside plate than the inside plate. The maximum equivalent stress according to the change of the applied loads increased linearly in the range of 47~181%. The deformation was larger at the upper end of the center pillar, and the maximum displacement was linearly increased in the range of 35~187%. The analysis results of the center pillar according to the applied loads show that the location and distribution of the maximum stress and displacement of the center pillar can be predicted.

Keywords

References

  1. K. W. Nam, S. H. Park, J. S. Yoo, S. M. Lee, "Analysis of Impact Characteristics of Bonded Dissimilar Materials for Center Pillar," The Korean Society of Mechanical Engineers, Vol. 36, No. 8, pp. 929-934, 2012 https://doi.org/10.3795/KSME-A.2012.36.8.929
  2. G. H. Bae, J. H. Song, H. Huh, S. H. Kim, "Optimum Design of a Center-pillar Model with a Simplified Side Impact Analysis," The Korean Society of Automotive Engineers, Vol. 13, No. 6, pp. 84-92, 2005
  3. G. H. Bae, H. Huh, J. H. Song, S. H. Kim, "Light-weight Design with a Simplified Center-pillar Model for Improved Crashworthiness," The Korean Society of Automotive Engineers, Vol. 14, No. 6, pp. 112-119, 2006
  4. M. W. Kim, "A Study on the Light-Weight Design of Hybrid B-pillar Considering Crashworthiness," 2017
  5. S. Y. Park, D. H. Kim, H. Y. Kong, "Developing B-PLR with Tailor Rolled Blank for weight reduction of car body," The Korean Society of Automotive Engineers Spring Annual Conference, pp. 877-881, 2015
  6. J. M. Cha, S. J. Byun, Z. H. Wang, Y. C. Kwon, "Study on Structural and Fatigue Analysis according to Shape change of Automatic Press," Journal of the Korean Society of Mechanical Technology, Vol. 19, No. 2, pp. 156-161, 2017 https://doi.org/10.17958/ksmt.19.2.201704.156
  7. Z. H. Wang, Y. C. Kwon, "Structural Analysis according to Load of Height-adjustable Table," Korea Journal Society of Mechanical Technology, Vol. 20, No. 3, pp. 273-278, 2018

Cited by

  1. Structural Analysis of Movable Seat Mechanism in Wheel Chair Developed for Transfering Patients to Bed vol.20, pp.5, 2018, https://doi.org/10.17958/ksmt.20.5.201810.678
  2. Simulation Analysis on Side Impact of Automobile Center Pillar vol.20, pp.4, 2018, https://doi.org/10.17958/ksmt.20.4.201808.467
  3. Durability Study of Subway Brake Disc and Wheel-type Brake vol.18, pp.7, 2018, https://doi.org/10.14775/ksmpe.2019.18.7.022
  4. Durability Study due to Shape of Clutch Pressure Plate vol.18, pp.7, 2018, https://doi.org/10.14775/ksmpe.2019.18.7.036
  5. A Study on Durability of Seat Height Motor Gear by Angle vol.18, pp.8, 2018, https://doi.org/10.14775/ksmpe.2019.18.8.018
  6. Durability Analysis of Automotive Seat Frame by Shape vol.19, pp.3, 2018, https://doi.org/10.14775/ksmpe.2020.19.03.014
  7. 피스톤 헤드의 형상에 따른 열응력 해석에 관한 융합 연구 vol.11, pp.7, 2018, https://doi.org/10.15207/jkcs.2020.11.7.163
  8. Durability Analysis due to Design Shape of Pinion Gear vol.19, pp.7, 2018, https://doi.org/10.14775/ksmpe.2020.19.07.016
  9. A Durability Investigation on Automotive Front Bumper Guard vol.19, pp.8, 2018, https://doi.org/10.14775/ksmpe.2020.19.08.001