Design & Manufacturing

Korean Society of Die & Mold Engineering (한국금형공학회)
권호 표지

An analysis on the injection mold simulation of single cushion pact cosmetic container for the friendly-environment and high productivity

친환경 고생산성을 위한 단일 쿠션 팩트 내 화장품 용기의 사출 시뮬레이션 분석

  • Received : 2018.06.22
  • Accepted : 2018.08.01
  • Published : 2018.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Generally, The women was used in the cosmetic cushion fact. It has developed with the consideration of manufacturing. In this study, we designed green-friendly and element parts lower and single cushion fact containers using a single material. Injection mold simulation were performed using on 3D design data. The injection mold simulation used the data (Injection time / Cooling time / Temperature / Pressure) in the injection mold parameters. In addition, the sink mark phenomenon in the simulation results is analyzed as a problem due to the thickness and further research is needed in the future.

Keywords

Acknowledgement

Grant : 부품, 소재 및 조립공정 단순화를 통한 친환경 고생산성 쿠션 팩트 화장품 용기 제품개발

Supported by : 중소벤처기업부

References

  1. Won, S. T., Heo, Y. M., Ko, Y. B., Kim, G. H., and Yoon, G. S. "Trends of Injection Molding Technology", Transactions of Materials Processing, Vol. 23, pp. 184-188, 2014.
  2. Won, S. T., Kim, J. D., Kim, D. U., Kim, G. H., and Yoon, G. S. "Trends of Press Forming Industry and Technology", Transactions of Materials Processing, Vol. 23, pp. 392-396, 2014.
  3. Ahn, S. H., Paul, C. B., and Wright, K. "Rapid Prototyping Service Considering Design For Manufacturing(DFM)", Transactions of the Korean Society of Mechanical Engineers, pp. 1293-1298, 2002.
  4. Hoog, M. S., Kim, J. M., and Park, H. K. "A study on the simplification of parts assembly using snap fit", Society for Computational Design and Engineering conference, pp. 795-800, 2006.
  5. Ahn, D. G., Park, M. W., Park, J. W., and Kim, H. S. "Determination of Molding Conditions of Double-Shot Injection Mold for the Computer Mouse via Three-Dimensional Injection Molding Analysis", Transactions of the Korean Society of Mechanical Engineers, Vol. 35 pp. 1619-1625, 2011. https://doi.org/10.3795/KSME-A.2011.35.12.1619
  6. Lee, H. W., and Park, C. W. "A Study on the Injection Molding Process of Inline Skate Frame Using Moldflow", Journal of the Korean Society of Marine Engineering, Vol. 34 pp. 289-295, 2010. https://doi.org/10.5916/jkosme.2010.34.2.289
  7. Lee, Y. C. "The Improvement of Weldline and Flow mark Defection by using Injection Molding Analysis", Journal of the Korean Society for Precision Engineering, Vol. 30, pp. 1295-1301, 2013. https://doi.org/10.7736/KSPE.2013.30.12.1295
  8. Hakimian, E., and Sulong, A. B. "Analysis of warpage and shrinkage properties of injection-molded micro gears polymer composites using numerical simulations assisted by the Taguchi method", Materials & Design, Vol. 42, pp. 62-71, 2012. https://doi.org/10.1016/j.matdes.2012.04.058
  9. Zink, B., and Kovacs, J. G. "The effect of limescale on heat transfer in injection molding", International Communications in Heat and Mass Transfer, Vol. 86, pp. 101-107, 2017. https://doi.org/10.1016/j.icheatmasstransfer.2017.05.018
  10. Kim, G. H., Yoon, G. S., Lee, J. W., Sohn, J. I. , Kim, Y. J., and Lee, J. B. "Investigation on Double-shot Injection Molding analysis for Production of Compact powder High-sealed Make-up Case", The Korean Society For Technology of Plasticity conference, pp. 427-430, 2012.