DOI QR코드

DOI QR Code

Cyclic testing of scaled three-story special concentrically braced frame with strongback column

  • Chen, Chui-Hsin (Department of Civil Engineering, National Chiao Tung University) ;
  • Tsai, Yi-Rung (Department of Civil Engineering, National Chiao Tung University) ;
  • Tang, Yao (Department of Civil Engineering, National Chiao Tung University)
  • Received : 2019.02.21
  • Accepted : 2019.05.08
  • Published : 2019.08.25

Abstract

For Special Concentrically Braced Frame (SCBF), it is common that the damage concentrates at a certain story instead of spreading over all stories. Once the damage occurs, the soft-story mechanism is likely to take place and possibly to result in the failure of the whole system with more damage accumulation. In this study, we use a strongback column which is an additional structural component extending along the height of the building, to redistribute the excessive deformation of SCBF and activate more structural members to dissipate energy and thus avoid damage concentration and improve the seismic performance of SCBF. We tested one-third-scaled, three-story, double-story X SCBF specimens with static cyclic loading procedure. Three specimens, namely S73, S42 and S0, which represent different combinations of stiffness and strength factors ${\alpha}$ and ${\beta}$ for the strongback columns, were designed based on results of numerical simulations. Specimens S73 and S42 were the specimens with the strongback columns, and S0 is the specimen without the strongback column. Test results show that the deformation distribution of Specimen S73 is more uniform and more brace members in three stories perform nonlinearly. Comparing Drift Concentration Factor (DCF), we can observe 29% and 11% improvement in Specimen S73 and S42, respectively. This improvement increases the nonlinear demand of the third-story braces and reduces that of the first-story braces where the demand used to be excessive, and, therefore, postpones the rupture of the first-story braces and enhances the ductility and energy dissipation capacity of the whole SCBF system.

Keywords

Acknowledgement

Supported by : Ministry of Science and Technology

References

  1. ANSI/AISC 341-10 (2010), Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction, Chicago, IL.
  2. Chen, C.H. and Hu, H.K. (2016), "Evaluation of loading sequences on testing capacity of concentrically braced frame structures", J. Constr. Steel Res., 130(1), 1-11. https://doi.org/10.1016/j.jcsr.2016.11.017.
  3. Chen, C.H. and Mahin, S. (2012), "Performance-based seismic demand assessment of concentrically braced steel frame buildings", PEER-2012/103, Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA.
  4. Chen, C.H., Tsia, I.J. and Tang, Y. (2016), "Drift concentration of a three-story special concentrically braced frame with strongback under earthquake loading", Appl. Mech. Mater., 863, 287-292. https://doi.org/10.4028/www.scientific.net/AMM.863.287.
  5. DASSE (2007), Cost Advantages of Buckling Restrained Braced Frame Buildings, DASSE Design Inc.
  6. Eskandari, R., Vafaei, D., Vafaei, J. and Shemshadian, M.E. (2017), "Nonlinear static and dynamic behavior of reinforced concrete steel-braced frames", Earthq. Struct., 12(2), 191-200. https://doi.org/10.12989/eas.2017.12.2.191.
  7. Guneyisi, E.M. and Azez, I. (2016), "Seismic upgrading of structures with different retrofitting methods", Earthq. Struct., 10(3), 589-611. https://doi.org/10.12989/eas.2016.10.3.589.
  8. Ji, X., Kato, M., Wang, T, Hitaka, T. and Nakashima, M. (2009), "Effect of gravity columns on mitigation of drift concentration for braced frames", J. Constr. Steel Res., 65, 2148-2156. https://doi.org/10.1016/j.jcsr.2009.07.003.
  9. Khatib, F., Mahin, S. and Pister, K.S. (1988), "Seismic behavior of concentrically braced steel frames", UCB/EERC-88/01, Earthquake Engineering Research Center, University of California, Berkeley, CA.
  10. Lai, J.W. and Mahin, S. (2013), "Experimental and analytical studies on the seismic behavior of conventional and hybrid braced frames", PEER-2013-20, Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA.
  11. MacRae, G.A., Kimura, Y. and Roeder, C.W. (2004), "Effect of column stiffness on braced frame seismic behavior", J. Struct. Eng., ASCE, 130(3), 381-391. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:3(381).
  12. Mar, D. (2010), "Design examples using mode shaping spines for frame and wall buildings", Proceedings of the 9th U.S. National and 10th Canadian Conference on Earthquake Engineering, Paper No. 1400, Toronto, Canada.
  13. McKenna, F. (1997), Object Oriented Finite Element Programming: Frameworks for Analysis, Algorithms and Parallel Computing, University of California, Berkeley, CA.
  14. Pollino, M., Slovenec, D., Qu, B. and Mosqueda, G. (2017), "Seismic rehabilitation design and analysis of concentrically braced frames using stiff elastic cores", J. Struct. Eng., ASCE, 143(9), 04017080. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001810.
  15. Qu, B., Sanchez-Zamora, F. and Pollino, M. (2014), "Mitigation of inter-story drift concentration in multi-story steel concentrically braced frames through implementation of rocking cores", Eng. Struct., 70, 208-217. https://doi.org/10.1016/j.engstruct.2014.03.032.
  16. Qu, B., Sanchez-Zamora, F. and Pollino, M. (2015), "Transforming seismic performance of deficient steel concentrically braced frames through implementation of rocking cores", J. Struct. Eng., ASCE, 141(5), 04014139. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001085.
  17. Qu, B., Sanchez-Zamora, F., Pollino, M. and Hou, M.H. (2016), "Rehabilitation of steel concentrically braced frames with rocking cores for improved performance under near-fault ground motions", Adv. Struct. Eng., 20(6), 940-952. https://doi.org/10.1177/1369433216668101.
  18. Qu, Z., Wada, A. Motoyui, S., Sakata, H. and Kishiki, S. (2012) "Pin-supported walls for enhancing the seismic performance of building structures", Earthq. Eng. Struct. Dyn., 41, 2075-2091. https://doi.org/10.1002/eqe.2175.
  19. Sabelli, R. (2001), "Research on improving the design and analysis of earthquake-resistant steel-vraced frames", Earthquake Engineering Research Institute, the 2000 NEHRP Professional Fellowship Report, PF2000-9, Oakland, CA.
  20. Simpson, B.G. and Mahin, S.A. (2018) "Experimental and numerical investigation of strongback braced frame system to mitigate weak story behavior", J. Struct. Eng., ASCE, 144(2), 04017211. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001960.
  21. Slovenec, D., Sarebanha, A., Pollino, M., Mosqueda, G. and Qu, B. (2017), "Hybrid testing of the stiff rocking core seismic rehabilitation technique", J. Struct. Eng., ASCE, 143(9), 04017083. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001814.
  22. Somerville, P.G. (1997), Development of Ground Motion Time Histories for Phase 2 of the FEMA /SAC Steel Project, SAC BD/97-04, SAC Steel Joint Venture, Sacramento California.
  23. Tehranizadeh, M., Amirmojahedi, M. and Moshref, A. (2016), "Simplified methods for seismic assessment of existing buildings", Earthq. Struct., 10(6), 1405-1428. http://dx.doi.org/10.12989/eas.2016.10.6.1405.
  24. Tirca, L. and Tremblay, R. (2004), "Influence of building height and ground motion type on the seismic behavior of zipper concentrically braced steel frames", Proceedings of the 13th World Conference on Earthquake Engineering, Paper No. 2894, Vancouver, B.C., Canada.
  25. Tremblay, R. (2003), "Achieving a stable inelastic seismic response for multi-story concentrically braced steel frames", Engineering Journal, Second Quarter.
  26. Tremblay, R. and Merzouq, S. (2004), "Dual buckling restrained braced steel frames for enhanced seismic response", Proceedings of Passive Control Symposium, Yokohama, Japan.
  27. Uriz, P. and Mahin, S. (2008), Towards Earthquake Resistant Design of Concentrically Braced Steel Structures, PEER-2008/08, Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA.
  28. Wada, A., Qu, Z., Motoyui, S. and Sakata, H. (2011), "Seismic retrofit of existing SRC frames using rocking walls and steel dampers", Front. Arch. Civil Eng., 5(3), 259-266. https://doi.org/10.1007/s11709-011-0114-x.