Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Research on the Efficient Manufacturing Method of Photocatalyst Concrete according to the Type and Mixing Ratio of Photocatalyst

광촉매 종류 및 혼입률에 따른 효율적 광촉매 콘크리트의 제조 방법에 관한 연구

  • 박기준 (한국건설기술연구원 인프라안전연구본부) ;
  • 박정준 (한국건설기술연구원 인프라안전연구본부) ;
  • 곽종원 ;
  • 김성욱 (한국건설기술연구원 인프라안전연구본부)
  • Received : 2019.01.24
  • Accepted : 2019.03.03
  • Published : 2019.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, we evaluated the mechanical properties and nitrogen oxides removal characteristics according to the type and incorporation rate of the photocatalyst and investigated the method of separated placement for the production of economical and efficient photocatalyst concrete. As a result, when the photocatalyst incorporation rate was 5%, the highest compressive strength and elastic modulus were measured. As a result of evaluating the nitrogen oxides removal performance by the photocatalytic reaction, as the photocatalyst incorporation rate increased, the nitrogen oxide removal rate increased. At this time, the nitrogen oxides removal performance of photocatalyst P-25 was better than the NP-A. In consideration of economic efficiency, we have provided a method of separated placement for casting a constant thickness of concrete surface with photocatalyst concrete and evaluated the integrated performance at this time. As a result, it appears to be equal to or higher than mechanical performance and durability performance as compared with Plain, and it is judged that the integrated behavior is satisfied.

본 연구에서 광촉매 종류 및 혼입율에 따른 역학적 특성 및 질소산화물 제거 특성을 평가하였고 보다 경제적이고 효율적인 광촉매 콘크리트 제조를 위해 분할 타설하는 방법에 대해 검토하였다. 그 결과 광촉매 혼입률이 5%일 때 가장 높은 압축강도와 탄성계수가 측정되었다. 광촉매 반응에 의한 질소산화물 제거 성능평가 결과 광촉매 혼입률이 증가함에 따라 질소산화물 제거율이 증가하였다. 이때 광촉매 P-25의 질소산화물 제거성능은 NP-A보다 우수하였다. 경제성을 고려하여 콘크리트 표면의 일정 두께를 광촉매 콘크리트로 타설하는 분할 타설 방안을 제안하였고, 이때의 일체화 성능을 평가하였다. 그 결과 역학적 성능 및 내구성능이 Plain에 비해 동등 이상으로 나타나 일체화 거동을 만족하는 것으로 판단된다.

Keywords

References

  1. Ali, N., Shadi, R. (2011), TiO2 nanoparticles effects on physical, thermal and mechanical properties of self compacting concrete with ground granulated blast furnace slag as binder, Journal of Energy and Buildings, 43, 995-1002. https://doi.org/10.1016/j.enbuild.2010.12.025
  2. Beeldens, A. (2006), An environmental friendly solution for air purification and self-cleaning effect : the application of TiO2 as photocatalyst in concrete, Proceedings of Transport Research Arena Europe-TRA, Goooteborg, Sweden.
  3. Jung, J. H., Kim, S. H., and Lee, G. H. (2010), Photocatalyst cement concrete research trend and method of utilization, International Journal of Highway Engineering, Korea Road Association, 12(2), 25-34.
  4. Kim, H. J. (2000), Research on development of cement materials for removing nitrogen oxides (NOx), Journal of Cement, Korea Cement Association, 153, 50-54.
  5. Kim, Y. K., Hong, S. J., Lee, K. B., and Lee, S. W. (2014), Evaluation of NOx Removal Efficiency of Photocatalytic Concrete for Road Structure, International Journal of Highway Engineering, Korea Road Association, 16(5), 49-58.
  6. Lee, S. T., Hoontonm R. D., Jung, H. S., Park, D. H., and Choi, C. S. (2008), Effect of limestone filler on the deterioration of mortars and pastes exposed to sulfate solutions at ambient temperature, Cement and Concrete Research, 38(1), 68-76. https://doi.org/10.1016/j.cemconres.2007.08.003
  7. Monica, J. H., and Andrew, T. H. (2013), Nanotechnology innovations for the construction industry, Progress in Materials Science, 58, 1056-1102. https://doi.org/10.1016/j.pmatsci.2013.04.001
  8. Nazari, A., and Riahi, S. (2011), The Effects of TiO2 Nanoparticles on Flexural Dam-age of Self-compacting Concrete, International Journal of Damage Mechanics, 20(7), 1049-1072. https://doi.org/10.1177/1056789510385262