Journal of the Korean Recycled Construction Resources Institute (한국건설순환자원학회논문집)

Korean Recycled Construction Resources Institute (한국건설순환자원학회)
권호 표지
DOI QR코드

DOI QR Code

Contribution of Two-Stage Mixing Approach on Compressive Strength of Mortar Made of Recycled Fine Aggregate

2단계 배합방법이 순환잔골재 혼입 모르타르의 압축강도에 미치는 영향

  • Kim, Yu-Jin (Department of Architectural Engineering, Pukyong National University) ;
  • Kim, Gyu-Won (Department of Architectural Engineering, Pukyong National University) ;
  • Chung, Chul-Woo (Division of Architectural and Fire Protection Engineering, Pukyong National University)
  • 김유진 (부경대학교 건축공학과) ;
  • 김규원 (부경대학교 건축공학과) ;
  • 정철우 (부경대학교 건축.소방공학부)
  • Received : 2020.10.21
  • Accepted : 2020.11.23
  • Published : 2020.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

This work has been initiated to find possibility whether recycled fine aggregate can be used as a source of aggregate for structural concrete or not. Two-stage mixing approach was chosen in order to maximize strength potential from recycled fine aggregate. Moisture content of the recycled fine aggregate was changed, and two different types of two-stage mixing approaches were applied to produce cement mortar. The strength of mortar made of 100% recycled fine aggregate by two-stage mixing approaches was compared to that of mortar made of 100% washed sea sand. According to the results, the effect of moisture content on compressive strength was observed from low water cement mortar(W/C 0.3). In case of W/C 0.5 cement mortar, no clear relationship was observed between moisture content and strength development. It was found that two-stage mixing approach has a potential to increase the strength of mortar made of 100% recycled fine aggregate. In case of modified version of two-stage mixing approach which first prepares cement paste and pours recycled fine aggregate into the cement paste, was more effective to increase the strength of mortar made of 100% recycled fine aggregate.

본 연구는 순환잔골재의 사용 촉진을 위한 궁극의 해결방안 중 하나인 구조용 콘크리트의 골재로 사용될 수 있는 가능성을 확인하기 위하여 진행되었다. 순환잔골재의 함수상태 변화에 따라, 2단계 배합방법 및 변형된 형태의 2단계 배합방법을 적용한 모르타르의 강도가 세척사로 제조된 일반배합 모르타르의 강도에 근접하는지를 확인하여, 2단계 배합의 활용성을 증명하고자 하였다. 본 연구의 결과에 따르면, 골재의 함수상태에 의한 영향은 물시멘트비 0.3인 경우에만 발현되었고, 물시멘트비 0.5인 경우에는 명확한 경향을 찾을 수 없었으나, 2단계 배합방법이 순환잔골재 혼입 모르타르의 강도증진에 기여할 수 있는 가능성은 확인하였다. 또한 기존의 2단계 배합방법에 비해 시멘트 페이스트를 먼저 배합한 후, 순환잔골재를 투입한 변형된 형태의 2단계 배합방법을 활용하는 것이 순환잔골재 혼입 모르타르의 강도발현에 더욱 효과적인 것으로 나타났다.

Keywords

References

  1. Ahn, B.H. (2018). Performance and Field Application of Rural and Fishing Village Road Concrete Pavement using Air Cooled Blast Furnace Slag Aggregates, Ph.D Thesis, Gongju University, 145 [in Korean].
  2. American Society for Testing and Materials C 109. (2020), Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens), West Conshohocken: ASTM International.
  3. American Society for Testing and Materials C 305. (2020), Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency West Conshohocken: ASTM International.
  4. Folino, P., Xargay, H. (2014). Recycled aggregate concrete - Mechanical behavior under uniaxial and triaxial compression, Construction and Building Materials, 56, 21-31. https://doi.org/10.1016/j.conbuildmat.2014.01.073
  5. Ju, M., Park, K., Park, W. J. (2019). Mechanical behavior of recycled fine aggregate concrete with high slump property in normal- and high-strength, International Journal of Concrete Structures and Materials, 13, 61. https://doi.org/10.1186/s40069-019-0372-x
  6. Kim, G.H., Lee, D.J., Cho, H.C., Ahn, J.H. (2007). Development of recycled aggregate producing circuit using autogenous mill, The Korean Institute of Resources Recycling, 16(5), 25-30 [in Korean].
  7. Kim, J.H. (2019). A Study on the Quality Improvement Methods of Recycled Fine Aggregate for Manufacturing of High Quality Recycled Aggregate Concrete, Graduate School of Architecture, Ph.D Thesis, Konkuk University [in Korean].
  8. Kim, J.M., Kim, H.S., Park, S.G., Kim, B.J., Kwak, E.G. (2008). Optimum abrasing condition for recycled fine aggregate produced by low speed wet abraser using sulfur, Journal of the Korea Concrete Institute, 20(5), 557-563 [in Korean]. https://doi.org/10.4334/JKCI.2008.20.5.557
  9. Knaack, A.M., Kurama, Y.C. (2014). Behavior of reinforced concrete beams with recycled concrete coarse aggregates, Journal of Structural Engineering, 141(3), B4014009. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001118
  10. Korea Institute of Construction Technology (2002). Policy and Technology Development for Promotion of Recycling of Construction Waste, Korea Institute of Construction Technology [in Korean].
  11. Kwon, G.C. (2006). Major amendments to the act on the promotion of recycling of construction wastes, enforcement decree, and enforcement rules, Journal of Korean Recycled Contruction Resources Institute, 4(1), 1975-5201 [in Korean].
  12. McNeil, K., Kang, T.H.K. (2013). Recycled concrete aggregates: A review, International Journal of Concrete Structures and Materials, 7(1), 61-69. https://doi.org/10.1007/s40069-013-0032-5
  13. Park, J.H. (2008). Study on the Practical Recycling Strategy of Construction Wastes, Diploma Dissertation, Master's Thesis, Chung-Ang University [in Korean].
  14. Sim, H.S., Park, C.W., Park, S.J., Kim, G.J., Kim, H.J., Kim, T.G., Lim, C.H. (2006). Development of Recycling & Practical Using for Value Added Resourcing of the Recycled Aggregate Obtained from Waste-Concrete, The Final Report of Hanyang University's Industrial-Academic Cooperation Group [in Korean].
  15. Sung, H.S. (2001). Disposal Difficulty and the Improved Measures of Intermediary Selective Processing on Constructional Waste, Master's Thesis, Keimyung University [in Korean].
  16. Tahar, Z.E.A., Ngo, T.T., Kadri, E.H., Bouvet, A., Debieb, F., Aggoun, S. (2017). Effect of cement and admixture on the utilization of recycled aggregates in concrete. Construction and Building Materials, 149, 91-102. https://doi.org/10.1016/j.conbuildmat.2017.04.152
  17. Tam, V.W.Y., Gao, X.F., Tam, C.M. (2005). Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach, Cement and Concrete Research, 35(6). 1195-1203. https://doi.org/10.1016/j.cemconres.2004.10.025
  18. Tam, V.W.Y., Gao, X.F., Tam, C.M. (2006). Comparing performance of modified two-stage mixing approach for producing recycled aggregate concrete, Magazine of Concrete Research, 58(7). 477-484. https://doi.org/10.1680/macr.2006.58.7.477
  19. Tam, V.W.Y., Tam, C.M. (2007). Assessment of durability of recycled aggregate concrete produced by two-stage mixing approach, Journal of Materials Science, 42(10), 3592-3602. https://doi.org/10.1007/s10853-006-0379-y
  20. Tam, V.W.Y., Tam, C.M., Wang, Y. (2007). Optimization on proportion for recycled aggregate in concrete using tow-stage mixing approach, Construction and Building Materials, 21(10), 1928-1939. https://doi.org/10.1016/j.conbuildmat.2006.05.040
  21. Xie, T., Ozbakkaloglu, T. (2016). Behavior of recycled aggregate concrete-filled basalt and carbon FRP tubes. Construction and Building Materials, 105, 132-143. https://doi.org/10.1016/j.conbuildmat.2015.12.068