The Journal of the Korea institute of electronic communication sciences (한국전자통신학회논문지)

Korea Institute of Electronic Communication Science (한국전자통신학회)
권호 표지
DOI QR코드

DOI QR Code

The Current-Position Cascade PID Control of Delta-type Parallel Robot

델타 로봇의 전류-위치 Cascade PID 제어

  • Received : 2020.02.27
  • Accepted : 2020.04.15
  • Published : 2020.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes a method of designing and controlling delta robots with low-cost DC motors, which are widely used in the automation process. Simulation was performed by interpreting the mechanics and dynamics of the delta robot, and based on this analysis, low-cost DC motor was selected. Experiments were conducted to obtain characteristic values of motors and the current-position cascade control system was designed and implemented. In order to verify the feasibility of the proposed system, the experiment to check that the end-effector of the delta robot follows the target path was progressed. Through the experiment, the limitations of using low-cost motors were overcome by designing compensation algorithms and the performance of the position control was verified.

본 논문은 현재 자동화 공정에서 널리 쓰이는 델타 로봇을 저가형 DC 모터로 제작 및 제어하는 방법을 제안한다. 델타 로봇의 기구학 및 동역학을 해석하여 시뮬레이션을 한 후, 이를 기반으로 저가형 DC 모터를 선정하였다. 실험을 통하여 모터의 특성 값들을 획득하고 제어 이론을 적용하여 전류-위치 Cascade 제어 시스템을 설계하였다. 설계한 시스템의 성능을 검증하기 위해서 델타 로봇의 말단효과장치의 목표 경로를 설정하여 실험을 진행하였다. 실험을 통하여 저가형 모터를 사용함으로서 발생하는 문제점들을 보상 알고리즘을 설계하여 극복하고 End-effector의 위치 제어 성능을 입증하였다.

Keywords

References

  1. H. Kim, "Dynamics Modeling and Control of a Delta High-speed Parallel Robot", Journal of the Korean Society of Manufacturing Process Engineers 13(5), Vol. 13 , Issue 5, Oct. 2014, pp. 90-97. https://doi.org/10.14775/ksmpe.2014.13.5.090
  2. K. Rosquist, "Modelling and control of a Parallel Kinematic Robot," Msc Thesis, Lund University Department of Automatic Control, 2013.
  3. Y. Li, D. Shang and Y. Liu, "Kinematic Modelling and Error Analysis of Delta Robot Considering Parallel Error," International Jouranl of Advanced Robotic Systems, Vol. 16, Issue 5, 2019, pp. 1-9
  4. K. M. Zheng and Q. J. Zhang, "Elastic Dynamic and Analysis of Vibration Characteristics of Delata Robot with Joint Clearance," Trans Chinese Soc Agric Eng, vol. 31, 2015, pp. 39-48.
  5. R. L. Williams II, "The Delta Parallel Robot: Kinematics Solutions," Doctorial Thesis, Ohio University Mechanical Engineering, Oct. 2016.
  6. M. Paranav, A. Mukilan, and C. S. Sundar Ganesh, "A Novel Design of Delta Robot," International Jouranl of Multidisciplinary Research and Modern Education, vol. 2, no. 2, 2016, pp. 365-377
  7. W. Shang and S. Cong, "Nonlinear computed torque control for a high-speed planar parallel manipulator," Mechatronics, vol. 19, no. 6, 2009, pp. 987-992 https://doi.org/10.1016/j.mechatronics.2009.04.002
  8. V. M. Becerra, S. Cook and J. Deng, "Predictive Computed-torque Control of a PUMA 560 Manipulator Robot," IFAC Proceedings Volumes, vol. 38, no. 1, 2005, pp. 229-234
  9. H. Jung, U. Kim, B. You, and I. Choy, "Power Supply of Ultrasonic Phased Array for Focus Control of Acoustic Pressure," J. of the Korea Institute of Electronic Communication Sciences, vol. 14, no. 1, Feb. 2019, pp. 137-146. https://doi.org/10.13067/JKIECS.2019.14.1.137
  10. Y. Jeon and W. Cho, "Sensorless Speed Control of IPMSM Using an Extended Kalman Filter and Nonlinear and Adaptive Back-Stepping Control Technique," J. of the Korea Institute of Electronic Communication Sciences, vol. 7, no. 6, 2012, pp. 1413-1422. https://doi.org/10.13067/JKIECS.2012.7.6.1413