한국항공우주학회지 (Journal of the Korean Society for Aeronautical & Space Sciences)

  • 제48권8호
  • /
  • Pages.581-588
  • /
  • 2020
  • /
  • 1225-1348(pISSN)
  • /
  • 2287-6871(eISSN)
한국항공우주학회 (The Korean Society for Aeronautical and Space Sciences)
권호 표지
DOI QR코드

DOI QR Code

고전압 기폭관의 노화 특성 연구

Study on Aging Characteristics of Exploding Foil Initiator

  • Kim, Dong-seong (Defense Reliability Research Center, Defense Agency for Technology and Quality) ;
  • Jang, Seung-gyo (The 4th Research and Development Institute, Agency of Defence Development)
  • 투고 : 2020.03.04
  • 심사 : 2020.07.18
  • 발행 : 2020.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

고전압 기폭관의 노화 특성에 관하여 연구하였다. 노화 특성 관측을 위해 먼저 고전압 기폭관의 주요 구성품을 분류하고, 고장 메커니즘을 정의하였다. 위력과 감도 측면에서 노화 특성을 정의하였으며, HFC (Heat Flow Calorimetry)를 통해 계산된 활성화 에너지와 아레니우스 이론을 기반으로 가속노화시험 계획을 수립하였다. 노화된 시료를 이용하여 민감도 시험인 Neyer Test와 위력시험인 Dent Test를 통하여 성능 변화를 관측하였다. 민감도 시험을 통해 구한 반폭점에서 노화 경향을 관찰하였으나 관련 규격을 고려하면 충분히 긴 수명을 가지고 있는 것으로 분석되었다.

The aging characteristics of exploding foil initiator (EFI) are studied. In order to observe the aging characteristics, the main components of the exploding foil initiator were classified and the failure mechanism was defined. The aging characteristics were defined in terms of power and sensitivity, and the accelerated aging test plan was established based on the activation energy calculated by HFC (Heat Flow Calorimetry) and Arrhenius theory. The performance variation was observed using the sensitivity test (Neyer test) and power test (Dent test) for the aged samples. The aging characteristic was observed on the mean exploding point of the sensitivity test, but long-enough life span was predicted considering the related specification.

키워드

참고문헌

  1. Wells, W. W., Solid Rocket Booster Reliability Guidebook-Volume II, Probabilistic Design and Analysis Methods for Solid Rocket Boosters, SAE International, 1996.
  2. Depart of the Air Force, Electroexplosive Subsystem Safety Requirements and Test Methods for Space Systems, MIL-STD-1576, 1984.
  3. Barry T., Neyer, Cox, L., Stoutenborough T. and Tomasoski, R., "HNS-IV Explosive Properties and Characterization Tests," 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, July 2003, pp. 1-6.
  4. Rouduit, B., et. al., "The Simulation of the Thermal Behavior of Energetic Materials based on DSC and HFC Signals," Journal of Thermal Analysis and Calorimetry, Vol. 93, July 2008, pp. 143-152. https://doi.org/10.1007/s10973-007-8864-3
  5. Nappert, L., An Exploding Foil Initiator System, Defense Research and Development, 1996.
  6. Ahn, G. H., Kim, J. H., Kim, S. B., Lee, J. B. and Ryu, B. T., "A Study on Accurate Energy Release Performance of Electric Initiator," Korean Society for Precision Engineering Fall Conference, December 2015, pp. 640-643.
  7. Kim, K. J., Kim, K. H. and Jang, S. G., "Prediction Model and Verification of Explosive Ignition in Exploding Foil Initiator System," 2nd Thermal and Fluid Engineering Conference, April 2017, pp. 1-5
  8. Kim, K. J., Kim, K. H. and Jang, S. G., "Modeling of Explosive Detonation by Flyer Impact in Microscale Exploding Foil Initiator System," 31st International Symposium on Space Technology and Science (ISTS), June 2017, pp. 1-5.
  9. Khazaka, R., Locatelli, M. L., Diaham, S. and Bidan, P., "Endurance of Thin Insulation Polyimide Films for High-Temperature Power Module Applications," IEEE Transaction on Components, Packaging, and Manufacturing Technology, Vol. 3, No. 5, May 2013, pp. 811-817. https://doi.org/10.1109/TCPMT.2013.2249559
  10. Tsukiji, M., Bitoh, W. and Enomoto, J., "Thermal Degradation and Endurance of Polyimide Films," 1990 IEEE International Symposium on Electrical Insulation, Toronto, Canada, June 1990.
  11. Fusaro, R. L., Effect of Thermal Aging on the Tribological Properties of Polyimide Films and Polyimide-Bonded Graphite Fluoride Films, NASA Technical Memorandum 79045, 1979.
  12. Sili, E., Cambronne, J. P., Naude, N. and Khazaka, R., "Polyimide Lifetime under Partial Discharge Aging : Effects of Temperature, Pressure and Humidity," IEEE Transaction on Dielectrics and Electrical Insulation, Vol. 20, No. 2, April 2013, pp. 435-442. https://doi.org/10.1109/TDEI.2013.6508745
  13. Kim, K. J., Kim, K. H. and Jang, S. G., "Prediction of Insensitive Explosive Charge Detonation by Flyer Impact in Exploding Foil Initiator," Proceeding of Korean Society for Precision Engineering Fall Conference, October 2016, pp. 472-475.
  14. Kim, K. J., Kwak, H. S., Kim, K. H. and Jang, S. G., "Analytic Study on Plasma Expansion of Thin-Film Bridge Burst and Flyer Acceration in Exploding Foil Initiator," Proceeding of Korean Society for Precision Engineering Fall Conference, December 2015, pp. 655-659.