DOI QR코드

DOI QR Code

The Control System of a Medical Robot Bed for Prevention and Healing of Pressure Ulcer

욕창 예방 및 치유를 위한 의료용 로봇 침대 제어 시스템

  • Received : 2020.06.19
  • Accepted : 2020.08.05
  • Published : 2020.08.31

Abstract

In this study, the controller structure and control algorithm of medical robot bed developed for pressure ulcer prevention and healing are described. The existing pressure ulcer prevention mattress is operated manually and the remaining maximum body pressure exceeds the pressure of ulcer generation, so there is always room for pressure ulcers. However, the system developed in this study does not generate the pressure ulcers because the body pressure drops to zero when the keyboard of the bed descends using the active electric driving keyboard. In addition, even if the bed is raised and the pressure above the critical body ulcer pressure is abnormal, the device and the control algorithm are designed so that the lasting time is within the pressure ulcer generation critical time and the pressure ulcer itself is not generated. The bed key board motor is a motor designed with the BLDC servos suitable for medical use and these can communicate each other easily through CAN(Car Area Network). The system is new medical robot bed that is effective in preventing pressure ulcers and will be distributed to many patients suffering from pressure ulcers.

본 연구에서는 욕창 예방과 치유를 위해 개발된 의료용 로봇 침대의 제어기 구조와 제어 알고리즘에 대해 기술한다. 상용의 기존 욕창 예방 매트리스는 수동으로 동작하고 잔존 최대 체압이 욕창 발생 임계 체압을 넘어서기 때문에 이론적으로는 항상 욕창이 발생할 여지가 있지만, 본 연구에 개발된 시스템은 능동형 전기구동 건반을 사용하여 침대의 건반이 하강하면 체압이 0으로 떨어져서 욕창이 발생하지 않는다. 또한, 침대의 건반이 상승하여 욕창 임계 체압 이상이더라도 지속시간을 욕창 발생 임계시간 이내로 하도록 기구와 제어 알고리즘이 설계되어 있어서 욕창 발생 자체가 일어나지 않으며, 이는 바로 상용화가 가능한 욕창 예방 로봇 침대임을 뜻한다. 침대 건반의 모터는 의료용으로 적합한 BLDC 서보 드라이버를 설계한 모터로 되어있고 전장이 단순하여 쉽게 사용할 수 있도록 설계되었으며, CAN(Car Area Network)방식으로 서로 통신한다. 제작된 시스템은 욕창 예방에 효과적인 새로운 의료용 로봇 침대로 욕창으로 고통받는 많은 환자들에게 제공될 수 있도록 보급할 예정이다.

Keywords

References

  1. National Pressure Ulcer Advisory Panel. Pressure ulcer stage. Retrieved May 24, 2007, 2012 from http://www.npuap.org/pr2.htm.
  2. Statistical Office. Elderly person statistics. 2015.
  3. Wound, Ostomy, and Continence Nurses Society. Prevalence and Incidence: A Toolkit for Clinicians. Glenview, IL: WOCN; 2004.
  4. How-to Guide: Prevent Pressure Ulcers. Cambridge, MA: Institute for Healthcare Improvement; 2011. www.ihi.org.
  5. Anous, M. M., & Heimbach, D. M. Causes of deaths and predictors in burned patients. Journal of Trauma-Injury Infection & Critical Care, Vol. 26, No. 2, pp. 135-139, 1986. https://doi.org/10.1097/00005373-198602000-00006
  6. Lyder, C. H., & Ayello, E. A. Ptressure ulces: A patient safety issue, In: Hughes RG, ed. Patient Safety and Quality: an evidence-based handbook for nurses. AHRQ Publication No. 08-0043. Rockville, MD: Agency for Healthcare Research and Quality, 2009.
  7. Kottner, J., Gefen, A., Lahmann, N. Weight and pressure ulcer occurrence: A secondary data analysis. International Journal of nursing studies, Vol. 48, pp.1339-1348. 2011, http://dx.doi.org/10.1016/j.ijnurstu.2011.04.011.
  8. Junghwa Hong, Gyuseok Kim, Joonok Chu, Munseong Mu, Inruk Lee, Development of an intelligent bedsore prevention seat cushion, Journal of the Korean Society of Precision Engineering, Vol. 20, No. 1, pp. 7-25, 2003.
  9. Russo, C. A., Steiner, C., & Spector, W. Hospitalizations related to pressure ulcers among adults 18 yearts and older, 2006 (HCUP Statistical Brief #64). Rockville, MD: Agency for Healthcare Research and Quality, 2008.
  10. Younga Kim, Youngae Yang, Evaluation of the usability of mattresses for prevention pf pressure ulcers centered on the elderly, Journal of the Korea Elderly Friendly Industry Association, Vol. 10, No. 1, pp. 1-8, 2018.
  11. Youngdae Lee, Moonsoo Choi, et al., "Research on the Development of Automated Multifunction Integrated Motion Bed", The J. of the Inst. of Internet, Broadcasting and Communication, vol.18, Issue 5, pp.215-222, 2018. https://doi.org/10.7236/JIIBC.2018.18.5.215
  12. https://www.youtube.com/watch?v=wh56qajNYR8&feature=youtu.be
  13. https://www.zdnet.co.kr/view/?no=20130726151317
  14. https://www.iis.fraunhofer.de/en/pr/2016/20161109_BMT_Dekubitus.html
  15. Youngdae Lee, Changyoung Kim et al., "Enhancement of 4 Bar Parallelogram Linkage for a Medical Bed", The J. of the Convergence on Culture Technology(JCCT), vol.6 no.1, pp.615-620, February 29, 2020
  16. Youngdae Lee, Moonsoo Choi, et al., "A Study on the Automatic Sheet Exchange for a Hospital Bed", The J. of the Convergence on Culture Technology(JCCT), vol.5, no.4, pp.361-366, November 30, 2019
  17. Daewoo Yu, "The Cortex-M3 Written Easily (Basics), NEWTC Co. LTD. 2015
  18. Kanghee Cho, Seungho Yoon, Ho Lee, Effects of mattresses and positioning on Interface Pressure and Skin Blood Flow, Korean Journal of Rehabilitation Medicine, Vol. 34, No. 2, pp. 214-219, 2010.
  19. Conine, T. A., Hershler, C., & Daechsel, D., Pressure ulcer proplylsxis in elderly patients using polyurethane foam or Jay wheelchair cushions, International Journal of Rehabilitation Research, Vol. 17, No. 2, pp. 123-138, 1994. https://doi.org/10.1097/00004356-199406000-00003
  20. Youngsik Kang, Seonghwan Yang, Moonseon Cho, Comparative study on the contact pressure characteristics of wheelchair seat cushionsm, Daegu University Special Education Rehabilitation Science Research Institute, Vol. 49, No. 1, pp. 183-196, 2010.