Journal of the Korean Society for Aeronautical & Space Sciences (한국항공우주학회지)

The Korean Society for Aeronautical and Space Sciences (한국항공우주학회)
권호 표지
DOI QR코드

DOI QR Code

Postbuckling Analyses and Derivations of Shell Knockdown Factors for Isogrid-Stiffened Cylinders Under Compressive Force and Internal Pressure

압축력과 내부 압력을 동시에 받는 등방성 격자 원통 구조의 후좌굴 해석 및 좌굴 Knockdown factor의 도출

  • Received : 2020.05.28
  • Accepted : 2020.08.25
  • Published : 2020.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study derives numerically the shell Knockdown factors for the isogrid-stiffened cylinders of space launch vehicles when the axially compressive force and internal pressure are applied simultaneously. A commercial nonlinear finite element analysis software, ABAQUS, is used for the present work. Nonlinear postbuckling analyses are conducted to calculate the global buckling loads of a cylinder without and with the internal pressure. The shell Knockdown factor is numerically derived using the predicted global buckling loads without and with the geometrically initial imperfection of a cylinder. When the internal pressure of 500 kPa and compressive force are applied to the cylinder, the global buckling load and Knockdown factor increases by 304% and 53%, respectively, as compared to the results without the internal pressure.

본 논문에서는 우주 발사체 추진제 탱크 구조인 등방성 격자 원통 구조의 경량 설계를 위하여 축 방향의 압축력과 내부 압력을 함께 고려하여 좌굴 Knockdown factor를 수치해석 연구를 통하여 새롭게 정립하였다. 등방성 격자 원통 구조의 유한요소 모델링 및 비선형 후좌굴 해석을 위하여 비선형 유한요소 해석 프로그램인 ABAQUS를 사용하였다. 본 연구 결과, 축 방향의 압축력과 500 kPa의 내부 압력을 함께 받는 등방성 격자 원통 구조의 전역 좌굴 하중 및 좌굴 Knockdown factor가 축 방향의 압축력만을 받는 원통 구조에 비해 각각 304% 및 53%만큼 증가하였다. 따라서 발사체 탱크 구조의 좌굴 설계 시, 내부 압력과 압축력을 함께 고려한 본 연구의 좌굴 Knockdown factor를 이용할 경우, 내부 압력을 고려하지 않은 설계에 비하여 경량 구조 설계가 가능함을 확인하였다.

Keywords

References

  1. Meyer, R. R., Harwood, O. P., Harmon, M. B. and Orlando, J. I., "Isogrid design handbook," NACA CR-124075, 1973.
  2. Peterson, J. P., Seide, P. and Weingarten, V. I., "Buckling of thin-walled circular cylinder," NASA SP-8007, 1968.
  3. Hilburger, M. W., "Developing the next generation shell buckling design factors and technologies," Proceeding of The AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, April 2012.
  4. Haynie, W. T. and Hilburger, M. W., "Comparison of methods to predict lower bound buckling loads of cylinders under axial compression," Proceeding of The AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, April 2010.
  5. Hilburger, M. W., "On the development of shell buckling knockdown factors for stiffened metallic launch vehicle cylinder," Proceeding of The AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, January, 2018.
  6. Hilburger, M. W., Lovejoy, A. E., Thornburgh, R. P. and Rankin, C., "Design and analysis of subscale and full-scale buckling-critical cylinders for launch vehicle technology development," Proceeding of The AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, April 2012.
  7. Yoo, J. T., Lee, J. W., Yoon, J. H., Jang, Y. S., Yi, Y. M. and Cho, G. R., "Buckling test and non-linear analysis of aluminium isogrid panel," Journal of the Korean Society for Aeronautical and Space Sciences, Vol. 33, No. 4, 2005, pp. 35-40. https://doi.org/10.5139/JKSAS.2005.33.4.035
  8. Kim, H. I., Sim, C. H., Park, J. S., Lee, K., Yoo, J. T. and Yoon, Y. H. "Derivation of buckling knockdown factors using the equivalent model for isogrid-stiffened cylinders," Proceeding of the 8th European Conference for Aeronautics and Space Sciences, July 2019.
  9. Sim, C. H., Kim, H. I., Lee, Y. L., Park, J. S. and Lee, K. J., "Postbuckling analyses and derivations of Knockdown factors for hybrid-grid stiffened cylinder," Aerospace Science and Technology, Vol. 82-83, 2018, pp. 20-31. https://doi.org/10.1016/j.ast.2018.08.025
  10. Wang, B., Du, K., Hao, P., Zhou, C., Tian, K., Xu, S., Ma, Y. and Zhang, X., "Numerically and experimentally predicted knockdown factors for stiffened shells under axial compression," Thin-Walled Structure, Vol. 109, 2016, pp. 13-24. https://doi.org/10.1016/j.tws.2016.09.008
  11. Kim, H. I., Sim. C. H., Park, J. S., Lee, K. J., Yoo, J. T. and Yoon, Y. H., "Numerical derivation of buckling Knockdown factors for isogrid-stiffened cylinders with various shell thickness ratios," International Journal Aerospace Engineering, Vol. 2020, 2020, Article ID 9851984.
  12. White, S. C., Weaver, P. M. and Wu, K. C., "Post-buckling analyses of variable-stiffness composite cylinders in axial compression," Composite Structures, Vol. 123, 2015, pp. 190-203. https://doi.org/10.1016/j.compstruct.2014.12.013
  13. Kim, H. I., Sim, C. H., Park, J. S. and Lee, K., "Postbuckling analysis and derivation of shell knockdown factors of iso-grid cylindrical structures considering internal pressure," Proceeding of The Society for Aerospace System Engineering Spring Conference, April 2019, pp. 565-566.