Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지

Static Strength of Internally Ring-Stiffened Tubular T-Joints

내부 환보강 T형 관이음부의 정적강도

  • CHO HYUN-MAN (Civil Department, Busan Newport North Container 2-1, Samsung Engineering and Construction) ;
  • RYU YEON-SUN (Department of Ocean Engineering, Pukyong National Univ.)
  • 조현만 (삼성물산 건설부문 토목사업본부 부산신항 북컨테이너 2-1) ;
  • 류연선 (부경대학교 해양공학과)
  • Published : 2004.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

In order to increase the load carrying capacity of tubular structures, the joints of tubular members are usually reinforced with various reinforcement system. A stiffening method with internal ring stiffeners is effectively used for the steel tubular joint with a large diameter. In this study, the behavior of internally ring-stiffened tubular T-joints subjected to axial loading is assessed. For the parametric study, nonlinear finite element analyses are used to compute the static strength on non-stiffened and ring-stiffened T-joints. Based on the numerical results, an internal ring stiffener is found to be efficient in improving the static strength. The influence of geometric parameters has been determined, and the reinforcement effect are evaluated. Based on the FE results, regression analises are performed considering the practical size of ring stiffener. Finally strength estimation formulas for ring-stiffened tubular T-joints are proposed.

Keywords

References

  1. 김재동 (1996). 해양구조물 원통형 연결부의 구조강도에 대한 실험적 연구, 박사학위논문, 충남대학교
  2. 류연선, 조현만, 김정태(1997). '해양구조물 T형 관이음부의 응력해석', 한국해양공학회 춘계학술대회 논문집, pp 256-262
  3. 백점기, 신병천 (1989). '해양구조물 원통부재의 최종강도에 대한 손상의 영향', 한국해양공학회지, 제3권, 제2호, pp 77-86
  4. 엄동석, 강성원, 박재형, 하우일(1993). '유한요소법에 의한 튜블라 이음부의 응력집중계수 및 피로강도 해석', 한국해양공학회지, 제8권, 제2호, pp 141-150
  5. 조현만, 류연선, 김정태 (2000). 'X형 관이음부의 보강방법에따른 극한강도 해석', 한국전산공학회 가을 학술발표회 논문집, pp 230-237
  6. 조현만, 류연선 (2002). '내부 환보강 T형 관이음부의 정적강도', 한국해양공학회 춘계학술대회 논문집, pp 145-150
  7. American Petroleum Institute (1993). 'Recommended Practice for Planning, Designing and Constructing Fixed Qffshore Platforms', API RP2A
  8. Cho, H.M. and Ryu, Y.S. (2002). 'Effect of Internal Ring Stiffener on the Ultimate Strength of Tubular X-Joints', Proc. of Advanced in Stmctural Engineering and Mechanics, ASEM, PP 18
  9. Cho, H.M., Ryu, Y.S. and Kim, J.T. (2003). 'Optimum Strength Esdmation Formulae for Ring Stiffened Tubular T-joints' Proc. of Fifth World Congress on Structural and Multidisciplinary Optimization, pp 31
  10. Dexter, E.M. and Lee, M.K. (1999). 'Static Strength of Axially Loaded Tubular K-Joints: I. Behavior', Journal of Structural Engineering, ASCE, Vol 125, No 2, pp 194-201 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:2(194)
  11. Kang, C.T., Moffat D.G. and Mistry, J. (1998). 'Strength of DT Tubular Joints with Brace and Chord Compression', Joumal of Structural Engineering, ASCE, Vol 124, No 7, pp 775-783 https://doi.org/10.1061/(ASCE)0733-9445(1998)124:7(775)
  12. Marshall, P.W. (1992). Design of Welded Tubular Connections, Basis and Use of AWS Code Provision, Elsevier Sdence Publishers
  13. Ramachandra, D.S., Madhava Rao, A.G., Gandhi, P, Pant, P.K (1992). 'Structural EfSciency of Internally Ring- stiffened Steel Tubular Joints', Jonmal of Structural Engineenng, ASCE, Vol 118, No 11, pp 3016-3035 https://doi.org/10.1061/(ASCE)0733-9445(1992)118:11(3016)
  14. Rhee, H.C. (1992). 'Comparison of Finite-.element Stress Solutions of Multi-Plane Tubular Joint With and Without Ring and Longitudinal Stiffeners', OTC Paper 6942, pp 621-25
  15. Sawada, Y., Idogaki, S. and Sekita, K. (1979). 'Static and Fatigue Tests on T-joints Stiffened by an Internal Ring', OTC Paper 3422, pp 563-574
  16. Thandavamoorthy, T.S., Madhava Rao, A.G. and Santhakumar. (1999). 'Behavior of Internally Ring-stiffened Joints of Qffshore Platforms', J. of Structural Engineering, ASCE, Vol 125, No 11, pp 1348-1352 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:11(1348)
  17. Vegte, G.J. (1995). The Static Strength of Uniplanar and Multiplanar Tubular T-and X-joints,, Doctral Dissertation, Delft Univ. of Technology, Netherlands