Physicochemical Changes of Woody Charcoals Prepared by Different Carbonizing Temperature

탄화온도가 목탄의 물리·화학적 특성에 미치는 영향

  • Jo, Tae-Su (Department of Forest products, Korea Forest Research Institute) ;
  • Choi, Joon-Weon (Department of Forest products, Korea Forest Research Institute) ;
  • Lee, Oh-Kyu (Department of Forest products, Korea Forest Research Institute)
  • 조태수 (국립산림과학원 임산공학부) ;
  • 최준원 (국립산림과학원 임산공학부) ;
  • 이오규 (국립산림과학원 임산공학부)
  • Received : 2007.02.12
  • Accepted : 2007.03.22
  • Published : 2007.05.25

Abstract

Carbon content, properties of micro-pore, and chemical properties of the charcoal prepared from wood powder, wood fiber, and bark of Abies sibirica Ledeb at different temperatures were investigated. The yield of charcoal decreased with increasing the carbonization temperature. The yield of bark charcoal was higher than those of wood and wood fiber charcoal. The content ratio of carbon atom in the charcoal increased with increasing the carbonization temperature, whereas those of hydrogen and oxygen atom were decreased. Ash content of bark charcoal was also higher than those of wood and wood fiber charcoal. The specific surface area of wood and wood fiber charcoal was greater than that of bark charcoal. In all charcoal, the specific surface area and the volume of micro-pore were highest when the carbonization temperature was $600^{\circ}C$, however they tended to decrease when the temperature was reached to $800^{\circ}C$. For the functionality test of chemical groups on the charcoal surface, adsorption test have performed against acidic (HCl) and basic chemicals (NaOH, $Na_2CO_3$, and $NaHCO_3$). As carbonization temperature increased, adsorption amount of HCl increased, while adsorption amounts of NaOH, $Na_2CO_3$, and $NaHCO_3$ were decreased. The charcoal prepared at higher temperature showed basic properties, while the charcoals manufactured at lower temperature presented acidic properties. Therefore, it was considered that the carbonization temperature affected the pH of charcoal.

북양젓나무(Abies sibirica Ledeb)를 이용하여 온도별로 탄화한 목분탄, 목섬유탄 및 수피탄 등 목질탄화물에 대한 탄소함량, 세공특성 및 화학적 특성을 조사하였다. 목질탄화물의 종류와 관계없이 탄화온도가 상승할수록 탄화수율은 감소하였으며, 목탄의 탄소함량은 탄화온도의 상승과 함께 증가하였으나, 수소나 산소의 함량은 감소하였다. 특히 수피탄화물은 목분 또는 목섬유 탄화물과 비교하여 탄화수율이 높게 나타났으며, 수피탄화물내 회분함량도 상당히 높았다. 목분탄과 목섬유탄의 비표면적이 수피탄보다 큰 경향이 있으며, $600^{\circ}C$까지는 탄화온도의 증가와 함께 비표면적, 전세공용적이 증가하여 최대를 나타내었으나, $800^{\circ}C$로 탄화온도가 상승하면 오히려 비표면적과 총세공용적이 감소되었다. 그러나 평균세공크기는 목탄종류와 관계없이 탄화온도의 상승과 함께 감소하였다. 한편 목탄의 표면 관능기양은 탄화온도가 높을수록 산성인 HCl 흡착량이 많고, 탄화온도가 낮을수록 염기성인 NaOH, $Na_2CO_3$$NaHCO_3$ 흡착량이 많으며, 이러한 결과는 목탄의 pH에 영향을 주어 고온탄화물은 알칼리성, 저온탄화물은 산성을 나타내는 것으로 생각된다.

Keywords

References

  1. 김병로, 공석우. 1999. 미이용 목질 페잔재의 탄화 이용 개빌(I) - 수종의 간벌재 탄화와 탄화물의 특성 -. 목재공학 27(2): 70-77
  2. 김병로, 이재용. 2006. 수피의 탄화 이용에 관한 연구. 목재공학. 34(1): 40-51
  3. 이오규, 조태수. 2006. 소나무 및 참나무 백탄의 물성과 구리(II)이온 흡착 효과. 임산에너지. 25(2): 55-63
  4. 조태수, 안병준, 최돈하, 宮越昭彦. 2005. 저온 열처리 셀룰로오스의 염기성가스 흡착과 용해특성. 목재공학. 33(6): 63-70
  5. 조태수, 이오규, 안병준, 최준원. 2006. 국산수종으로 탄화한 목탄의 물성 및 흡착성. 임산에너지. 25(1): 9-17
  6. Aoyama, M., K. Seki, S. Doi. 2001. Mecury Adsorption onto Pyrolyzed Waste Paper. J. Environ. Sci. Health. A36(10): 2047-2054
  7. Aoyama, M., K. Seki, Y. Kurimo, K. Chen and S. Doi. 2000. Removal of Inorganic Mecury from Aqueous Solutions by Carbonized Waste Newsprint Fiber. Environmental Technology. 21: 1013-1018 https://doi.org/10.1080/09593332108618042
  8. H. P. Boehm. 1966. Adv. in Catalysis. 16: 179-274 https://doi.org/10.1016/S0360-0564(08)60354-5
  9. H. P. Boehm. 1994. Some Aspects of The Surface Chemistry of Carbon Black and Other Carbon. Carbon. 32(5): 759-769 https://doi.org/10.1016/0008-6223(94)90031-0
  10. Kurimoto, Y., S. Doi. 2001. Masakazu Aoyama, Removal of trichloroethylene from aqueous solution by pyrolyzed Japanese cedar bark. J.Wood Sci 47: 76-79 https://doi.org/10.1007/BF00776650
  11. 近藤民雄, 米澤保正, 右田伸彦. 木材化學. 共立出版株式會社. 1978. p. 500
  12. 北村壽宏, 松本壽生, 片山裕之. 1999. スギ材からの吸着用木炭の製造に及ぼす製炭倏件の 影響. 木材學會 45(2): 171-177
  13. 安部郁夫. 1994. 吸着劑として見直される木炭. 科學と工業. 68(4): 161-169
  14. 安部郁夫, 岩崎 訓, 岩田良美, 古南 博, 計良善也. 1998. 木炭の製造方法と吸着特性の關係. 炭素. 185: 277-284
  15. 人見充則, 計良善也, 立体英機, 幾田信生, 川舟功朗, 安部郁夫. 1993. 多孔性炭素材料の吸着性能評 法(木炭類の細孔構造と吸着性能). 炭素. 156: 22-28
  16. 齊藤幸惠, 森 美知子, 信田 總, 有馬孝禮. 2000. 木質系炭化物質のホルムアルデヒド吸脫着. 木材學會 46(6): 596-601