Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Inductor Shape in Steel Forming Process with High Frequency Induction Heating

유도가열을 이용한 강판성형공정에서 유도코일 형상의 효과

  • Yang, Young-Soo (Dept. of Mechanical Engineering, Chonnam National University) ;
  • Bae, Kang-Yul (Dept. of Mechatronics Engineering, Jinju National University) ;
  • Shin, Hee-Yun (Dept. of Mechanical Engineering, Chonnam National University)
  • 양영수 (전남대학교 기계공학과) ;
  • 배강열 (진주산업대학교 메카트로닉스공학과) ;
  • 신희윤 (전남대학교 기계공학과)
  • Published : 2008.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Because of high intensity and easy controllability of the heat source, high frequency induction heating has been concerned and studied for the steel forming process in the ship building industry. However, the heating and forming characteristics have to be further properly modelled and analyzed for the process to be utilized with its optimal working parameters. In this study, a modelling with thermo-elasto-plastic analysis is performed using the FEM to study heat flow and deformation of the steel plate during the forming process with the electro-magnetic induction heating. The numerical model is then used to study the effect of the inductor shape on the magnitude of angular deformation of the plate during the forming process. It is revealed that the square shape of inductor induces the largest deformation among the rectangular inductors.

Keywords

References

  1. H. Shen, Z.Q. Yao, Y.J. Shi and J. Hu : Study on temperature field induced in high frequency induction heating, Acta Metallurgica Sinica, 19-3 (2006), 190-196 https://doi.org/10.1016/S1006-7191(06)60043-4
  2. J. Nerg and J. Partanen : Numerical solution of 2D and 3D induction heating problems with non-linear material properties taken into account, IEEE Transactions of Magnetics, 36-5 (2000), 3119-3121 https://doi.org/10.1109/20.908705
  3. C.-D. Jang, H.-K. Kim and Y.-S Ha : Prediction of plate bending by high-frequency induction heating, Journal of Ship Production, 18-4 (2002), 226-236
  4. K. Sadeghipour, J. A. Dolpkin and K. Li : A computer aided finite element/ experimental analysis of induction heating process of steel, Computers in Industry, 28 (1996), 195-205 https://doi.org/10.1016/0166-3615(95)00072-0
  5. J.-O Yun, Y.-S. Yang and H.-Y. Shin : Three dimensional analysis of induction heating process using a moving coordinate, Journ. of KWJS, 25-1 (2007), 24-29 (in Korean) https://doi.org/10.5781/KWJS.2007.25.1.024
  6. K.-Y. Bae, Y.-S. Yang, C.-M. Hyun, S.-H. Won, and S.-H. Cho : Derivation of simplified formulas to predict deformations of plate in steel forming process with induction heating, Journ. of KWJS, 25-4 (2007), 58-64 (in Korean) https://doi.org/10.5781/KWJS.2007.25.4.058
  7. K. Masubuchi : Analysis of welded structures, Pergamon Press, Ch. 2, 1980, 69-71
  8. B.-N. Seong : Fundamentals of physics, Yiwoo press, 1974, 439-441