Journal of Advanced Marine Engineering and Technology

  • 제33권8호
  • /
  • Pages.1187-1195
  • /
  • 2009
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지
DOI QR코드

DOI QR Code

완전 혼화조를 이용한 폐수처리 공정의 응집특성

Coagulation Characteristics of Wastewater Treatment Process Using Completely Mixed Chamber

  • 김동준 (전남대학교(여수) 자동차시스템공학과) ;
  • 박상규 (전남대학교(여수) 기계자동차공학부) ;
  • 이용호 (전남대학교(여수) 기계자동차공학부) ;
  • 양희천 (전남대학교(여수) 기계자동차공학부)
  • 발행 : 2009.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문은 완전 혼화조를 이용한 폐수처리 공정의 응집특성에 대한 연구를 목적으로 한다. 완전 혼화조 시스템은 유체 저장조, 임펠러가 장착된 3단의 혼화 및 응집부, 응집보조제 및 응집제 주입부, 응집 침전조 그리고 제어부로 구성된다. 실험용 폐수는 터널 공사현장에서 폐수 슬러지를 수거하여 약 1,000NTU의 탁도를 갖도록 만들었다. 응집보조제의 주입량이 증가함에 따라 약 99% 정도까지 탁도 제거율이 증가하였으며, 응집제의 주입량이 일정한 범위 이상으로 증가하면 탁도 제거율이 감소하는 것을 알 수 있다.

The objective of this study is to investigate the coagulation characteristics of the completely mixed chamber for wastewater treatment. The completely mixed chamber system was composed of the reservoirs, the three-stage mixing and coagulation part with propeller impeller, the injection parts of coagulants, a sedimentation tank and a control panel. Wastewater sample of pH 8.5 and initial turbidity 1,000NTU was prepared using sludge taken from a tunneling work site. The efficiency of turbidity removal with increasing the dosage of coagulant aids increased by about 99%. Increasing coagulant above the optimal dosage, however, the efficiency of turbidity removal decreased.

키워드

참고문헌

  1. C. H. Lee, S. H. Lee and M. okada, "Removal algae and cryptoporidium on drinking water treatment by polysilicato-iron coagulant", J. of KSEE, vol. 26, pp. 876-882, 2004
  2. S. H. Kim, "Characterizing and monitoring of coagulation and floc formation by using photometric dispersion analyzer(PDA)", RIST Research Paper, vol. 18, no. 4, pp.323-327, 2004
  3. S. Kawamura, Integrated Design and Operation of Water Treatment Facilities, John Wiley & Sons, New York, 2000
  4. G. S. Song, S. Y. Oh and J. J. Oh, "Numerical study on flow patterns in a stirred tank with impeller types", J. of Fluid Machinery, vol. 5, no. 3, pp. 29-35, 2002 https://doi.org/10.5293/KFMA.2002.5.2.029
  5. C. Luo, “Distribution of velocities and velocity gradients in mixing and flocculation vessels: comparison between LDV data and CFD predictions”, Ph.D Thesis, New Jersey Institute of Technology, 1997
  6. J. J. Ducoste, "The effects of tank size and impeller type on turbulent flocculation", Ph.D Thesis, Univ. of Illinois at Urbana-Champaign, 1996
  7. J. K. Jeong, T. I Yoon, H. J. Seo and J. Y. Kim, "Influence of mixing intensity on the biological wastewater treatment", J. of KSEE, vol. 5, pp. 67-83, 1983
  8. J. Y. Heo, I. K. Kang and S. W. Lee, "The characteristic floc growth in coagulation and flocculation processes", Korean Chem. Eng. Res., vol. 44, no.2, pp. 207-215, 2006
  9. M. I. Aguilar, J. Saez, M. Llorens, A. Soler, J. F. Ortuno, V. Meseguer and A. Fuentes, “"mprovement of coagulation-locculation process using anionic polyacrylamide as coagulant aid", Chemosphere, vol. 58, pp. 47-56, 2005 https://doi.org/10.1016/j.chemosphere.2004.09.008
  10. A. H. Mahvi and M. Razavi, "Application of polyelectrolyte in turbidity removal from surface water", American J. of Applied Sciences, vol. 2, no. 1, pp. 397-399, 2005 https://doi.org/10.3844/ajassp.2005.397.399
  11. J. M. Ebeling, P. L. Sibrell, S. R.ogden and S. T. Summerfelt, "Evaluation of chemical coagulation-flocculation aids for the removal of suspended solids and phosphorus from intensive recirculating aquaculture effluent discharge", Aquacultural Engineering, vol. 29, pp. 23-42, 2003 https://doi.org/10.1016/S0144-8609(03)00029-3
  12. T. Nandy, S. Shastry, P. P. Pathe and S. N. Kaul, "Pre-treatment of currency printing ink wastewater through coagulation-flocculation process", Water, Air, and Soil Pollution, vol. 148, pp.15-30, 2003 https://doi.org/10.1023/A:1025454003863
  13. H. S. Kim and S. H. Kim, "The experimental study of predicting optimum dosage of PAC using Jar-Test results", J. of KSWW, vol. 2, pp. 39-45, 1993
  14. S. W. Han, C. W. Lee and L. S. Kang, "Physical effect on synthesis of Al(III) polymeric inorganic coagulants for water treatment", Korean Chem. Eng. Res., vol. 42, no. 5, pp. 612-618, 2004
  15. L. S. Kang, S. W. Han and C. W. Jun, "Synthesis and characterization of polymeric inorganic coagulants for water treatment", Korean J. Chem. Eng., vol. 18, no. 6, pp. 965-970, 2001 https://doi.org/10.1007/BF02705627
  16. C. Huang and Y. Chen, "Coagulation of colloidal particles in water by chitosan", J. Chem. Tech. Biotechnol., vol. 66, pp. 227-232, 1996 https://doi.org/10.1002/(SICI)1097-4660(199607)66:3<227::AID-JCTB499>3.0.CO;2-M

피인용 문헌

  1. Performance characteristics of inline mixing and coagulation system vol.38, pp.3, 2014, https://doi.org/10.5916/jkosme.2014.38.3.269
  2. 그물망 압착식 섬유여과장치를 이용한 물 재이용 시스템 개발 vol.21, pp.12, 2012, https://doi.org/10.5322/jes.2012.21.12.1523