DOI QR코드

DOI QR Code

Low-Power Walking Compensation Method for Biped Robot Based on Consumption Energy Analysis

소비 에너지 분석을 통한 이족로봇의 저전력 보행 보정 기법

  • 이창석 (한경대학교 바이오.정보기술 대학원) ;
  • 나두영 (한경대학교 바이오.정보기술 대학원) ;
  • 김용태 (한경대학교 정보제어공학과, IT융합기술연구소)
  • Received : 2010.10.21
  • Accepted : 2010.11.29
  • Published : 2010.12.25

Abstract

In this paper we propose a low-power walking compensation method for biped robot based on consumption energy analysis. Firstly, basic walking motions that can reduce energy consumption of robot movements are implemented based on consumption energy analysis according to robot axes. We define knee bent motion as a basic walking motion. It can improve energy consumption and motion stability by lowering center of gravity of the biped robot. We analyze consumption energy of left and right leg of the robot using motor currents and propose a compensation method of walking motions to reduce unbalance of consumption energy between left leg and right leg. It can also improve energy consumption and walking stability of the robot. The proposed low-power compensation method based on consumption energy analysis is verified by walking experiments of a small biped robot with an embedded system.

본 논문에서는 소비 에너지 분석을 통한 이족보행로봇의 저전력 보행 보정 기법을 제안하였다. 먼저 이족 로봇의 보행 기본자세의 각 축별 소비 에너지를 분석하여 소비 에너지를 절감하는 기본 보행 자세를 구현하였다. 이족 로봇의 보행 기본자세를 무릎 구부리는 자세로 정하여 소비에너지를 줄이고, 무게중심을 낮추어 자세 안정성을 향상하였다. 이족로봇의 보행시 모터 전류를 측정하여 좌우 다리의 소비 전력을 분석하고, 이를 바탕으로 좌우 에너지 불균형을 제거하도록 보행 자세를 보정하였다. 보행 기본자세의 좌우 소비 전력을 고르게 분포시키게 자세를 보정함으로서 전체 소비 에너지를 감소시키고, 로봇의 좌우 자세 균형을 맞추어 보행시 안정성을 향상하였다. 제안한 소비 에너지 분석을 통한 저전력 보행 구현 방법은 임베디드시스템 기반의 소형 이족 로봇을 실제 제작하여 보행 실험을 통해 성능을 검증하였다.

Keywords

References

  1. J.J. Kuffner, S. Kagami, K. Nishiwaki, M. Inaba, and H. Inoue, ”Dynamically-stable motion planning for humanoid robots”, Autonomous Robots, Vol. 12, No. 1, pp. 105-118, 2002. https://doi.org/10.1023/A:1013219111657
  2. H. Cruse, 1980, “A Quantitative Model of Walking Incorporating Central and Peripheral Influences: The Control of the Individual Leg,” Biological Cybernetics, Vol. 37, pp. 131-1 https://doi.org/10.1007/BF00355451
  3. 노수희, 나두영, 김용태, "휴머노이드 로봇의 행동 보행 프리미티브 기반 보행 안정화,” 한국지능시스템 학회 논문지 Vol. 19, No. 2, pp. 125-126, 2009.
  4. 노수희, 김용태, “행동 프리미티브 기반 휴머노이 드 로봇의 행동 계획,” 한국지능시스템학회 논문지.Vol. 19, No. 1, pp. 108-114, 2009 https://doi.org/10.5391/JKIIS.2009.19.1.108
  5. 김동준, “이족 로봇의 제작 및 안정된 걸음걸이 구현,” 명지대 석사 학위 논문, 1998
  6. 이정호, 송재복, “정현파를 이용한 가변 주기 및 보폭을 갖는 이족보행로봇의 보행패턴 생성 알고리즘,” 로봇 공학회 논문지, 제 5권 1호, pp.95-100, 2008
  7. Q. Huang, K. Yokoi, S. Kajita, H. Arai,"Planning Walking Patterns for a Biped Robot," IEEE Trans. on Robotics and Automation, Vol. 17, No. 3, pp. 280-289. 2001 https://doi.org/10.1109/70.938385
  8. H. Choi, “Dynamics Model and Analysis of a Biped Walking Robot Actuated by a Closed-Chain M echanism," Journal of Robotic System, Vol. 21, No. 12, pp. 635-649, 2004 https://doi.org/10.1002/rob.20042
  9. I. G. Park, J. G. Kim, "Robust Control for Dynamic Walking of a Biped Robot with Ground Contacting Condition," Proc. of IEEE Int. Symp. on Industrial Electronics, Vol. 3, pp. 2067-2072, 2001