Journal of Industrial and Engineering Chemistry

The Korean Society of Industrial and Engineering Chemistry (한국공업화학회)
권호 표지
DOI QR코드

DOI QR Code

Water swelling behaviors of silica-reinforced NBR composites in deionized water and salt solution

  • Received : 2009.09.16
  • Accepted : 2009.12.18
  • Published : 2010.03.25
⟨ Previous Next ⟩

Abstract

Water swelling behaviors of silica-filled NBR composites in deionized water and NaCl solution were investigated by changing the swelling medium. Variation of the water swelling behaviors with the silica content was also investigated. The water swelling ratios increased with increasing the silica content. The water swelling ratios in deionized water were higher than those in NaCl solution. By changing the swelling medium from the deionized water to the salt solution, the water swelling ratio decreased or slightly increased at the point of swellingmedium change. For the swellingmedium change from the salt solution to the deionized water, the water swelling ratio notably increased when the swelling medium was changed. Low water swelling ratio in the salt solution was explained with the hydrated ions and ionic atmospheres.

Keywords

References

  1. S.-S. Choi, J.-C. Kim, J. Ind. Eng. Chem. 13 (2007) 950.
  2. S.-S. Choi, J.-C. Kim, C.-S. Woo, Bull. Kor. Chem. Soc. 27 (2006) 936. https://doi.org/10.5012/bkcs.2006.27.6.936
  3. S.-S. Choi, S.-H. Ha, C.-S. Woo, Bull. Kor. Chem. Soc. 27 (2006) 429. https://doi.org/10.5012/bkcs.2006.27.3.429
  4. S.-S. Choi, S.-H. Ha, Elastomer 42 (2007) 102.
  5. G. Wang, M. Li, X. Chen, J. Appl. Polym. Sci. 68 (1998) 1219. https://doi.org/10.1002/(SICI)1097-4628(19980523)68:8<1219::AID-APP3>3.0.CO;2-G
  6. Z. Zhang, G. Zhang, D. Li, Z. Liu, X. Chen, J. Appl. Polym. Sci. 74 (1998) 3145.
  7. Z. Zhang, G. Zhang, C. Wang, D. Liu, Z. Liu, X. Chen, J. Appl. Polym. Sci. 79 (2001) 2509. https://doi.org/10.1002/1097-4628(20010401)79:14<2509::AID-APP1059>3.0.CO;2-0
  8. J.H. Park, D. Kim, J. Appl. Polym. Sci. 80 (2001) 115 https://doi.org/10.1002/1097-4628(20010404)80:1<115::AID-APP1079>3.0.CO;2-K
  9. J.S. Jeon, D.J. Chung, J.H. Kim, J. Ind. Eng. Chem. 15 (2009) 949.
  10. J.S. Kim, J.H. Lee, W.S. Jung, J.W. Bae, H.C. Park, D.P. Kang, Elast. Compos. 44 (2009) 47.
  11. S. Wolff, U. Gorl, Kautsch. Gummi Kunstst. 44 (1991) 941.
  12. T.C. Gruber, C.R. Herd, Rubber Chem. Technol. 70 (1997) 727. https://doi.org/10.5254/1.3538456
  13. H. Raab, J. Frohlich, D. Goritz, Kautsch. Gummi Kunstst. 53 (2000) 137.
  14. S. Wolff, M.-J. Wang, Rubber Chem. Technol. 65 (1992) 329. https://doi.org/10.5254/1.3538615
  15. Y.-C. Ou, Z.-Z. Yu, A. Vidal, J.B. Donnet, Rubber Chem. Technol. 67 (1994) 834. https://doi.org/10.5254/1.3538714
  16. Y. Li, M.J. Wang, T. Zhang, F. Zhang, X. Fu, Rubber Chem. Technol. 67 (1994) 693. https://doi.org/10.5254/1.3538704
  17. A.S. Hashim, B. Azahari, Y. Ikeda, S. Kohjiya, Rubber Chem. Technol. 71 (1998) 289. https://doi.org/10.5254/1.3538485
  18. S.-S. Choi, I.-S. Kim, C.-S. Woo, J. Appl. Polym. Sci. 106 (2007) 2753. https://doi.org/10.1002/app.25744
  19. K.-J. Kim, Elast. Compos. 44 (2009) 134.
  20. S.-S. Choi, J. Appl. Polym. Sci. 79 (2001) 1127. https://doi.org/10.1002/1097-4628(20010207)79:6<1127::AID-APP170>3.0.CO;2-8
  21. S.-S. Choi, J. Appl. Polym. Sci. 85 (2002) 385. https://doi.org/10.1002/app.10614
  22. S.-S. Choi, D.-H. Chang, I.-S. Kim, Elastomer 37 (2002) 217.
  23. B.-T. Kim, S.-S. Choi, Elastomer 40 (2005) 29.
  24. D.C. Harris, Quantitative Chemical Analysis, 7th Ed., W. H. Freeman and Co., New York, 2007.

Cited by

  1. Absorption and diffusion measurements of water in acrylic paint films by single-sided NMR vol.71, pp.3, 2011, https://doi.org/10.1016/j.porgcoat.2011.03.019
  2. 디클로로아세트산 처리에 따른 무수말레산-그래프트 EPDM의 팽윤 거동 vol.48, pp.1, 2010, https://doi.org/10.7473/ec.2013.48.1.55
  3. 디클로로아세트산/톨루엔 공용매와 추출 온도를 이용한 무수말레산-그래프트 EPDM/산화 아연 복합체의 가교 특성 분석 vol.48, pp.4, 2010, https://doi.org/10.7473/ec.2013.48.4.288
  4. Water-swellable thermoplastic vulcanizates based on ethylene–vinyl acetate copolymer/chlorinated polyethylene/cross-linked sodium polyacrylate/nitrile butadiene rubber blends vol.27, pp.8, 2010, https://doi.org/10.1177/0892705712470259
  5. Hybrid composites prepared from Industrial waste: Mechanical and swelling behavior vol.6, pp.2, 2010, https://doi.org/10.1016/j.jare.2013.12.002
  6. Preparation and thermal stability of fluoroalkyl end-capped vinyltrimethoxysilane oligomeric silica/poly(acrylonitrile-co-butadiene) nanocomposites-application to the separation of oil and water vol.294, pp.9, 2010, https://doi.org/10.1007/s00396-016-3909-4
  7. Improving the friction and abrasion properties of nitrile rubber hybrid with hollow glass beads vol.101, pp.None, 2010, https://doi.org/10.1016/j.triboint.2016.04.022
  8. In situ formed internal water channels improving water swelling and mechanical properties of water swellable rubber composites vol.134, pp.9, 2010, https://doi.org/10.1002/app.44548
  9. Effect of cold plasma process on the surface wettability of NBR and the kerosene resistance of NBR/PTFE composites vol.49, pp.10, 2010, https://doi.org/10.1002/sia.6261
  10. Mechanical and Unlubricated Sliding Wear Properties of Nitrile Rubber Reinforced with Micro Glass Flake vol.10, pp.7, 2010, https://doi.org/10.3390/polym10070705
  11. Interaction between swelling behavior and erosion resistance of nitrile-butadiene rubber vulcanizates in sodium chloride solution vol.6, pp.7, 2010, https://doi.org/10.1088/2053-1591/ab17f1
  12. Preparation of epoxidized acrylonitrile butadiene rubber and its compatibilization effect on water‐swellable rubber composites vol.136, pp.26, 2010, https://doi.org/10.1002/app.47694
  13. Tribological Characteristic of a Ring Seal with Graphite Filler vol.13, pp.2, 2010, https://doi.org/10.3390/ma13020311
  14. Modification, Degradation and Evaluation of a Few Organic Coatings for Some Marine Applications vol.1, pp.3, 2010, https://doi.org/10.3390/cmd1030019