Journal of Power System Engineering (동력기계공학회지)

The Korean Society for Power System Engineering (한국동력기계공학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis on Induction Heating of Ring Flange for Wind Power

풍력발전용 링플랜지의 유도가열 해석

  • Yun, D.W. (Department of Robotics and Mechatronics, Korea Institute of Machinery and Materials) ;
  • Park, H.C. (Department of Robotics and Mechatronics, Korea Institute of Machinery and Materials) ;
  • Lee, I.C. (JinSung C&I Co. Ltd.) ;
  • Kim, S.Y. (JinSung C&I Co. Ltd.) ;
  • Park, N.K. (JinSung C&I Co. Ltd.)
  • 윤동원 (한국기계연구원 로봇메카트로닉스 연구실) ;
  • 박희창 (한국기계연구원 로봇메카트로닉스 연구실) ;
  • 이인철 (진성 C&I 기술연구소) ;
  • 김상영 (진성 C&I 기술연구소) ;
  • 박노경 (진성 C&I 기술연구소)
  • Received : 2011.12.23
  • Accepted : 2012.08.07
  • Published : 2012.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents an analysis on the induction heating of ring flange for wind farm. Ring flange is used for the connection of poles when building a column of wind power plant. Heat treatment of ring flange with the diameter of ${\O}1,000mm$ has been considered. For analysis on the induction heating, FEA is used. Firstly, electromagnetic filed analysis was performed to get the induction current distribution on the steel, After that, heat transfer analysis was performed using the magnetic filed analysis results. for more precise analysis, some measurement for permeability has been performed and the measurement data was used during the analysis. From the analysis, we get the temperature distribution on the ring flange.

Keywords

References

  1. Bum-Suk Do et al., 2008, "Local Heating of an Injection Mold using Selective Induction Heating", Proceedings of KSME, pp.119-123.
  2. Mu-Ho Han, Young_Min Yoon, 2005, "Induction Heating System for high accuracy Temperature Control of Zinc Pot", Proceedings of KIPE, pp.176-178.
  3. Dae-Chul Shin, Jae-Hoon Yoo, 2010, "A Study on the Temperature Control of Vapor System Using Induction Heating", J. of KIIEE, Vol. 24, No. 1, pp.117-123. https://doi.org/10.5207/JIEIE.2010.24.1.117
  4. Sung-Hyung Lee, Yun-Hyun Cho, 2009, "Study on the Design of Suitable Construction of High-Frequency Mass Heating Induction Coil", Proceedings of KIEE, pp. 849-850.
  5. Young-Soo Yang, Kang-Yul Bae and Hee-Yun Shin, 2008, "Effects of Inductor Shape in Steel Forming Process with High Frequency Induction Heating", J. of KWJS, Vol. 26, No. 4, pp.66-72. https://doi.org/10.5781/KWJS.2008.26.4.066
  6. Kwang-Jeek Lee, Joo-Hong Kim, "A Resonant Circuit Design the Inverter for Induction Heating", J. of KIIEE, Vol. 11, No. 6, pp.90-95.
  7. Jae-Hoon Yoo, Dae-Cheul Shin, 2008, "A Study on the Frequency Control on the Induction Heating System Using Two Step Resonant Inverter", J. of KIIEE, Vol. 22, No. 1, pp.95-103. https://doi.org/10.5207/JIEIE.2008.22.1.095
  8. Hyun-Jung Kim, Young-Seok Kim, 1993, "A Partial Circulating Current Type PWM Controlled Cycloconverter with a Resonant Circuit for Induction Heating", J. of KIIEE, Vol. 42, No. 10, pp.19-28.
  9. Jong-Oh Park, Young-Do Lim, 2008, "The study on Constant Power Control for the High Frequency Induction-Heating System using the PLL for Load Impedance Tracking", Proceedings of KIIT, pp.87-87.
  10. Jeong-Tae Kim et al, 1998, "The Study on High-Frequency Switching Drive Method Using IGBT For Non-Magnetic Induction Heating System", Proceedings of KIPE, pp.24-26.
  11. Y. S. Jung, 2002, "Modeling and Controller Design of elctro-Magnetic Valve for Vehicle Engine", J. of KSPSE, Vol. 6, No. 4, pp. 81-87.
  12. S.N. Yun, Y. B. Ham, J. D. Jo and B. S. Ryu, 2003, "Development of Solenoid Vlve for Exhaust Brake of Diesel Engines", J. of KSPSE, Vol. 7, No. 4, pp. 19-24.
  13. D. W. Yun, S. N. Yun, S. H. Lee and H. B. Shin, 2009, "Analysis on the influence of control cone of the proportional solenoid," Proceeding of KSPSE, pp. 119-122

Cited by

  1. A Study on the Benefit-Cost Analysis of Photovoltaic System in the Greenhome vol.18, pp.3, 2014, https://doi.org/10.9726/kspse.2014.18.3.112
  2. A Study on the Benefit-Cost Analysis of Solar Louver System vol.23, pp.4, 2012, https://doi.org/10.9726/kspse.2019.23.4.072