DOI QR코드

DOI QR Code

Design of 3D compression upper wear based on skin deformation during arm abduction

팔 외전 시 몸통의 피부 변화량 분석과 이를 활용한 3D 컴프레션 상의 설계

  • Kim, Nam Yim (Dept. of Clothing & Textiles, Chungnam National University) ;
  • Wu, Yan Jun (Dept. of Clothing & Textiles, Chungnam National University) ;
  • Hong, Kyunghi (Dept. of Clothing & Textiles, Chungnam National University)
  • Received : 2015.09.02
  • Accepted : 2015.10.06
  • Published : 2015.10.31

Abstract

Lines of non-extension (LoNEs) on torso surface during arm abduction were investigated to provide appropriate location for inserting less-extensible yarns which can be used as seams for design and or clothing pressure variation. As experimental methods, reference points about 3 cm apart were marked on the skin and scanned at 30, $90^{\circ}$ and $135^{\circ}$ arm abduction. Skin deformation was measured by connecting reference points in horizontal, vertical and various angles of diagonal directions. Observation of skin deformation was made within the separated sections of the torso as well as integrated ones to cover the various occasions of design application. LoNEs of front and back torso were provided as mapping lines. Actual compression wear of three types was constructed with different pattern reduction rate at each separated section using LoNEs as boundary cutting lines. Clothing pressure and subjective evaluations of those three compression wear were evaluated by six subjects. LoNEs found in this study were useful as seam lines to differentiate clothing pressure at each part of the body, providing positive wear sensation. It is also expected that LoNEs can be paths for less strechable conductive yarns of IT-integrated upper garments.

Keywords

References

  1. Aya, M., Tamaki, M., Sachiko, M., Tetsuro, K., Takehiro, T., Shigeki, W. (2002). Effects of Clothing Pressure Caused by Different Types of Brassieres on Autonomic Nervous System Activity Evaluated by Heart Rate Variability Power Spectral Analysis. Journal of physiological anthropology and applied human science, 21(1), 67-74. https://doi.org/10.2114/jpa.21.67
  2. Baek, Y. J., Choi, J. W., & Lee, K. S. (2007). Selection of Measurements Points for the Garment Pressure of the Brassier and Waist-Nipper. Korean J. Community Living Science, 18(3), 445-453.
  3. Berry, M. J. & Mcmurray, R. G. (1987). Effects of graduated compression stockings on blood lactate following an exhaustive about of exercise. American journal of physical medicine, 66(3), 121-132.
  4. Choi, J. H.(2011). Development of the Men's Scuba Diving Suit Pattern by Using 3D Body-Scanned Data. Journal of the Korean Home Economics Association, 49(4), 105-113. https://doi.org/10.6115/khea.2011.49.4.105
  5. Choi, J. Y. & Hong, K. H. (2014). 3D skin length deformation of lower body during knee joint flextion for the practical application of functional sportswear, Applied Ergonomics, 48, 186-201.
  6. Chun, J. S., Suh, D. A., & Lee, K. S. (2002). A Study on the Use of 3D Human Body Surface Shape Scan Data for Apparel Pattern Making. The Research Journal of the Costume Culture, 10(6), 709-717.
  7. Do, W. H. (2008). Analysis of Body Surface Change from 3D Scan Data of Men's Upper Bodies in Twenties: Focus on Application of Motorcycle Jacket Pattern. Journal of the Korean Society of Clothing and Textiles, 32(4). 530-541. https://doi.org/10.5850/JKSCT.2008.32.4.530
  8. Jeong, Y. H. & Hong, K. H. (2010). Development of 2D patterns for Cycling Pants using 3D Data of Human Movement and Stretch Fabric, Korean Journal of Human Ecology, 19(3), 555-563. https://doi.org/10.5934/KJHE.2010.19.3.555
  9. Kim, H. J. & Park, S. J. (2011) Torso Pattern Design for Korean Middle-Aged Women using 3D Human Body Scan Data, Journal of the Korean Society for Clothing Industry, 13(4), 600-613. https://doi.org/10.5805/KSCI.2011.13.4.600
  10. Kim, N. Y. (2012). Engineering Design of 3D compression suit based on the anatomical nature of moving body, Master's dissertation, Chungnam National University, Korea.
  11. Kim, S. Y. & Hong, K. H. (2012). Engineering design process of tight-fit sportswear using 3D information of dermatomes and skin deformation in dynamic posture. Korean Journal of Human Ecology, 21(3), 551-565. https://doi.org/10.5934/KJHE.2012.21.2.551
  12. Kim, T. G., Park, S. J., Park. J. W. Suh, C. Y., & Choi, S. A. (2012). Technical Design of Tight Upper Sportswear based on 3D Scanning Technology and Stretch Property of Knitted Fabric. Journal of the Korean Society for Clothing Industry, 14(2), 77-285.
  13. Kim, Y. W. & Baek, Y. J. (2009). Distribution of the Garments Pressure by Postures. Journal of the Korean Society of Clothing and Textiles, 33(5), 775-781. https://doi.org/10.5850/JKSCT.2009.33.5.775
  14. Kraemer W. J., Bush, R. U., Newtonc, N. D., Duncand, J. S., Volekb, C. R., Denegarb, P. C., John Johnstone, M. P., & Wayne, J. S. (1998). Influence of a compression garment on repetitive power output production before and after different types of muscle fatigue, Sports Medicine Training and Rehabilitation, 8(2), 163-184. https://doi.org/10.1080/15438629809512525
  15. Kraemer, W. J., Bush, J. A., Bauer, J. A., Triplett-McBride, N. T., Paxton, N. J., Clemson, A., Koziris, L. P., Mangino, L. C., Fry, A. C., & Newton, R. U.(1996). Influence of Compression Garments on Vertical Jump Performance in NCAA Division I Volleyball Players, Journal of Strength & Conditioning Research, 10(3), 180-183. https://doi.org/10.1519/1533-4287(1996)010<0180:IOCGOV>2.3.CO;2
  16. Lee, H. R. (2013). Ergonomic Design and its Pattern Development of Outdoor Pants Based on Skin Deformation in Dynamic Postures. Chungnam National University, Korea.
  17. Lee, J. H., Jun, J. I. & Chio, K. M. (2014). An Analysis of Compression Wear Designs and Structural Elements. Journal of the Korean Society of Clothing and Textiles, 16(3), 421-433.
  18. Lee, J. H., Jun, J. I. & Chio, K. M. (2015). Development of Compression Wear Tops for Men in Their Forties Based on Muscle Locations. Journal of the Korean Society of Clothing and Textiles, 39(2), 271-286. https://doi.org/10.5850/JKSCT.2015.39.2.271
  19. Lee, H. R. (2013). Ergonomic Design and its Pattern Development of Outdoor Pants Based on Skin Deformation in Dynamic Postures. Chungnam National University, Korea.
  20. Na, Y. J. & Kim, Y. H. (2011). Changes in Physiological Responses by the Pressure of Non-Elastic Corset. Journal of the Korean Society for Clothing Industry, 13(6), 943-951. https://doi.org/10.5805/KSCI.2011.13.6.943
  21. Oh, S. Y. & Chun, J. S. (2011). A Study of Shirts' Patternmaking Based on 3D Body Surface Changes in Golf Swing Postures. The Research Journal of the Costume Culture, 19(5), 1049-1060.
  22. Park, J, H. & Chun J. S. (2013). Compression of evaluation methods for measuring pressure of compressionwear. The Research Journal of the Costume Culture, 21(4), 535-545. https://doi.org/10.7741/rjcc.2013.21.4.535
  23. Park, H. J., Hong, K. H., & Cho, Y. S. (2009). Segmentation Using Curvature Information of 3D Body Surface for Tight-fit Pattern Making. Journal of the Korean Society of Clothing and Textiles, 33(1), 68-79. https://doi.org/10.5850/JKSCT.2009.33.1.068
  24. Park, S. Y. (2014). Development of a design method of active sportswear on thet sequential motions analysis. Doctorate dissertation, Yonsei University, Korea.
  25. Shin, K. H.,. & Suh, C. Y. (2014). 3D Body Scan Data Analysis for the Slim-fit Dress Shirts Pattern Design: Focused on the 40s Male. Journal of the Korean Society of Clothing and Textiles, 38(1), 97-109. https://doi.org/10.5850/JKSCT.2014.38.1.97
  26. Ziegert, B., & Keil, G. (1998). Stretch Fabric Interaction with Action Wearables: Defining a Body Contouring Pattern System. Clothing and Textiles Research Journal, 6(4), 54-64. http://sizekorea.kats.go.kr https://doi.org/10.1177/0887302X8800600408

Cited by

  1. The Effect of Compression Knee Band and Heat Treatment on Blood Velocity of the Elderly with Osteoarthritis vol.18, pp.5, 2016, https://doi.org/10.5805/SFTI.2016.18.5.716
  2. Methods to determine the size of pant patterns with curved design lines and their three dimensional construction using 3D virtual fitting vol.20, pp.4, 2016, https://doi.org/10.12940/jfb.2016.20.4.153
  3. Ergonomic 3D Pattern Development of Outdoor T-shirt for Men vol.25, pp.4, 2016, https://doi.org/10.5934/kjhe.2016.25.4.451
  4. Regional Skin Maximal Elongation Rate for Appling E-textiles to Tight-Fit Clothing vol.28, pp.3, 2017, https://doi.org/10.7856/kjcls.2017.28.3.365
  5. 의류학 연구 및 패션산업 현장에 도입되고 있는 3D 기술동향 및 적용사례 고찰 vol.42, pp.1, 2015, https://doi.org/10.5850/jksct.2018.42.1.195
  6. 겨드랑이 무의 크기에 따른 상의의 운동기능성과 외관 평가 vol.21, pp.4, 2015, https://doi.org/10.5805/sfti.2019.21.4.468
  7. 투습방수 직물을 사용한 기능성 아우터의 특성 분석 - 소재, 세탁·취급, 디자인, 패턴, 부자재, 봉제를 중심으로 - vol.23, pp.1, 2015, https://doi.org/10.5805/sfti.2021.23.1.129
  8. 해외 아웃도어 스포츠웨어의 테크니컬 패턴과 제품 특성 분석 vol.25, pp.3, 2015, https://doi.org/10.12940/jfb.2021.25.3.108