DOI QR코드

DOI QR Code

Effect of coloring agent on the color of zirconia

Coloring agent가 지르코니아 색조 재현성에 미치는 영향

  • Kim, Kwanghyun (Department of Prosthodontics, School of Dentistry, Kyung Hee University) ;
  • Noh, Kwantae (Department of Prosthodontics, School of Dentistry, Kyung Hee University) ;
  • Pae, Ahran (Department of Prosthodontics, School of Dentistry, Kyung Hee University) ;
  • Woo, Yi-Hyung (Department of Prosthodontics, School of Dentistry, Kyung Hee University) ;
  • Kim, Hyeong-Seob (Department of Prosthodontics, School of Dentistry, Kyung Hee University)
  • 김광현 (경희대학교 치과대학.치의학전문대학원 치과보철학교실) ;
  • 노관태 (경희대학교 치과대학.치의학전문대학원 치과보철학교실) ;
  • 배아란 (경희대학교 치과대학.치의학전문대학원 치과보철학교실) ;
  • 우이형 (경희대학교 치과대학.치의학전문대학원 치과보철학교실) ;
  • 김형섭 (경희대학교 치과대학.치의학전문대학원 치과보철학교실)
  • Received : 2016.02.03
  • Accepted : 2017.01.04
  • Published : 2017.01.31

Abstract

Purpose: The aim of this study was to evaluate the effect of two types of coloring agents and the number of application on the color of zirconia. Materials and methods: Monolithic zirconia specimens ($15.7mm{\times}15.7mm{\times}2.0mm$) (n = 33) was prepared and divided into 11 groups. Each experimental group was coded as a1-a5, w1-w5 according to the type of coloring agent and number of application. Specimens with no coloring agent applied were set as control group. The color difference of specimen was measured by using double-beam spectrophotometer, and calculated color difference (${{\Delta}E^*}_{ab}$), translucency parameter (TP). All data was analyzed with two-way ANOVA, multiple comparison $Sch{\acute{e}}ffe$ test, Pearson correlation and linear regression analysis. Results: As the number of application increased, values of $CIE\;L^*$ was decreased, but values of $CIE\;b^*$ was increased in both coloring agents. However, there was no significant difference on values of translucency parameter. The color difference range of each group was ${0.87{\Delta}E^*}_{ab}$ to ${9.43{\Delta}E^*}_{ab}$. Conclusion: In this study, type of coloring agent and the number of application did not affect the color difference of zirconia.

목적: 이 연구의 목적은 coloring agent의 종류와 적용 횟수가 지르코니아의 색조에 미치는 영향을 알아보는 것이다. 재료 및 방법: 단일구조 지르코니아($15.7mm{\times}15.7mm{\times}2.0mm$)를 준비하여 완성된 시편은 11개 실험군 그룹으로 coloring agent의 종류와 적용 횟수에 따라 a1-a5와 w1-w5로 나누었다. 색조의 측정은 분광측색기를 이용하여 이루어졌다. Coloring agent를 적용시키지 않은 그룹을 대조군으로 설정하였다. 각 그룹의 색차의 정도(${{\Delta}E^*}_{ab}$)와 translucency parameter (TP)를 분석하였다. 측정치는 two-way ANOVA, multiple comparison $Sch{\acute{e}}ffe$ test, Pearson correlation와 linear regression analysis를 이용하여 분석하였다. 결과: Coloring agent의 적용횟수가 증가할수록 두가지 종류 모두에서 지르코니아의 명도는 감소하고 황색계열은 증가했다. Coloring agent는 지르코니아의 투명도에는 영향을 미치지 않았다. 각 그룹 간의 색조차이는 ${0.87{\Delta}E^*}_{ab}$에서 ${9.43{\Delta}E^*}_{ab}$였다. 결론: Coloring agent의 종류와 적용 횟수는 지르코니아의 색조 차이에 영향을 미치지 않았다.

Keywords

References

  1. Spear FM, Kokich VG. A multidisciplinary approach to esthetic dentistry. Dent Clin North Am 2007;51:487-505. https://doi.org/10.1016/j.cden.2006.12.007
  2. Sua'rez MJ, Lozano JF, Paz Salido M, Martl'nez F. Three-year clinical evaluation of In-Ceram Zirconia posterior FPDs. Int J Prosthodont 2004;17:35-8.
  3. Beuer F, Stimmelmayr M, Gernet W, Edelhoff D, Guh JF, Naumann M. Prospective study of zirconia-based restorations: 3-year clinical results. Quintessence Int 2010;41:631-7.
  4. Choi YS, Kim SH, Lee JB, Han JS, Yeo IS. In vitro evaluation of fracture strength of zirconia restoration veneered with various ceramic materials. J Adv Prosthodont 2012;4:162-9. https://doi.org/10.4047/jap.2012.4.3.162
  5. Triwatana P, Nagaviroj N, Tulapornchai C. Clinical performance and failures of zirconia-based fixed partial dentures: a review literature. J Adv Prosthodont 2012;4:76-83. https://doi.org/10.4047/jap.2012.4.2.76
  6. Marchack BW, Sato S, Marchack CB, White SN. Complete and partial contour zirconia designs for crowns and fixed dental prostheses: a clinical report. J Prosthet Dent 2011;106:145-52. https://doi.org/10.1016/S0022-3913(11)60112-1
  7. Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Effect of zirconia type on its bond strength with different veneer ceramics. J Prosthodont 2008;17:401-8. https://doi.org/10.1111/j.1532-849X.2008.00306.x
  8. Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part I: core materials. J Prosthet Dent 2002;88:4-9.
  9. Commission Internationale de l'Eclairage (CIE). Colorimetry, CIE 015. 3rd ed. Vienna: CIE Central Bureau; 2004.
  10. Johnston WM, Ma T, Kienle BH. Translucency parameter of colorants for maxillofacial prostheses. Int J Prosthodont 1995;8:79-86.
  11. Johnston WM, Kao EC. Assessment of appearance match by visual observation and clinical colorimetry. J Dent Res 1989;68:819-22. https://doi.org/10.1177/00220345890680051301
  12. Douglas RD. Color stability of new-generation indirect resins for prosthodontic application. J Prosthet Dent 2000;83:166-70. https://doi.org/10.1016/S0022-3913(00)80008-6
  13. Crispin BJ, Hewlett E, Seghi R. Relative color stability of ceramic stains subjected to glazing temperatures. J Prosthet Dent 1991;66:20-3. https://doi.org/10.1016/0022-3913(91)90345-W
  14. O'Brien WJ, Groh CL, Boenke KM. A new, small-color-difference equation for dental shades. J Dent Res 1990;69:1762-4. https://doi.org/10.1177/00220345900690111001
  15. Yu B, Ahn JS, Lee YK. Measurement of translucency of tooth enamel and dentin. Acta Odontol Scand 2009;67:57-64. https://doi.org/10.1080/00016350802577818
  16. Kim IJ, Lee YK, Lim BS, Kim CW. Effect of surface topography on the color of dental porcelain. J Mater Sci Mater Med 2003;14:405-9. https://doi.org/10.1023/A:1023206716774
  17. Lee YK, Yoon TH, Lim BS, Kim CW, Powers JM. Effects of colour measuring mode and light source on the colour of shade guides. J Oral Rehabil 2002;29:1099-107. https://doi.org/10.1046/j.1365-2842.2002.00961.x
  18. Lee YK, Cha HS, Ahn JS. Layered color of all-ceramic core and veneer ceramics. J Prosthet Dent 2007;97:279-86. https://doi.org/10.1016/j.prosdent.2007.03.010
  19. Kim HK, Kim SH. Effect of the number of coloring liquid applications on the optical properties of monolithic zirconia. Dent Mater 2014;30:229-37. https://doi.org/10.1016/j.dental.2014.04.008
  20. Spyropoulou PE, Giroux EC, Razzoog ME, Duff RE. Translucency of shaded zirconia core material. J Prosthet Dent 2011;105:304-7. https://doi.org/10.1016/S0022-3913(11)60056-5
  21. Pecho OE, Ghinea R, Ionescu AM, Cardona Jde L, Paravina RD, Perez Mdel M. Color and translucency of zirconia ceramics, human dentine and bovine dentine. J Dent 2012;40:e34-40. https://doi.org/10.1016/j.jdent.2012.08.018
  22. Shah K, Holloway JA, Denry IL. Effect of coloring with various metal oxides on the microstructure, color, and flexural strength of 3Y-TZP. J Biomed Mater Res B Appl Biomater 2008;87:329-37.
  23. Beuer F, Stimmelmayr M, Gueth JF, Edelhoff D, Naumann M. In vitro performance of full-contour zirconia single crowns. Dent Mater 2012;28:449-56. https://doi.org/10.1016/j.dental.2011.11.024

Cited by

  1. 치과용 지르코니아 착색제의 건조정도가 지르코니아 색조에 미치는 영향 vol.19, pp.8, 2017, https://doi.org/10.5762/kais.2018.19.8.176
  2. 치과용 지르코니아 착색 후 건조시간에 따른 반투명도의 차이 vol.22, pp.4, 2017, https://doi.org/10.5762/kais.2021.22.4.124