Journal of Practical Engineering Education (실천공학교육논문지)

Korean Institute for Pratical Engineering Education (한국실천공학교육학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Practice of Engineering Education through the Design and Production of Drones for Detecting Objects in Disaster Area

재난 지역의 물체를 탐지하기 위한 소형 무인기 설계와 제작을 통한 공학 교육의 실천에 관한 연구

  • Kang, Byeong-Ju (Major in Electronic Engineering/Department of Electrical, Electronic and Control Engineering, College of Engineering, Kongju National University) ;
  • Lee, Dae-Hee (Department of Electrical, Electronics & Communication Engineering, KOREATECH) ;
  • Chang, Eun-Young (Major in Electronic Engineering/Department of Electrical, Electronic and Control Engineering, College of Engineering, Kongju National University)
  • 강병주 (공주대학교 전자공학과) ;
  • 이대희 (한국기술교육대학교 전기전자통신공학과) ;
  • 장은영 (공주대학교 전자공학과)
  • Received : 2017.05.10
  • Accepted : 2017.05.24
  • Published : 2017.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

In order to satisfy the graduation requirements, the graduation work should be presented as an engineering dissertation system of the produced work and an outline of the procedure made by the major unit in accordance with the graduation thesis submission rules, and suggests necessary matters for improvement. The design content relates to a small unmanned aerial vehicle configuration for detecting personnel or objects in a disaster area. It is equipped with an infrared sensor and a GPS in the drone, the drone is control by using Blutooth communications. The drones detect the target and use the GPS to determine the location. As a result of the experiment, it was possible to detect the structure object within the range of 3~4 m, confirm the transmission of the position value in real time, and increase the communication distance by using RF communication.

졸업 조건 만족을 위한 졸업 작품 제작과 제작된 작품의 공학 논문 체계로 서술해야 하는 졸업 논문 제출 규정에 따라 전공단위에서 이루어진 절차의 개요를 제시하고, 개선에 필요한 사항을 제안한다. 설계 내용은 재난 지역의 인원이나 물체를 탐지하기 위한 소형 무인기 구성에 관한 것이다. 적외선 센서와 GPS를 소형 무인기인 드론에 탑재하고, 블루투스 통신을 이용하여 드론을 조종한다. 조종되는 드론이 구조 대상물을 탐지하고, 드론에 탑재된 GPS를 이용하여 실시간으로 탐지한 대상물의 위치를 수신하는 대상물 탐지용 드론을 설계하고 제작한다. 실험결과로 3~4 m 범위의 구조 대상물 탐지가 가능했고, 위치값을 실시간으로 전송하는 것을 확인했으며, RF 통신을 이용하여 통신 거리를 증가시킬 계획이다.

Keywords

References

  1. E. Y. Chang and S. B. Yoon, "A study on the operating management method of capstone design and graduation portfolio using with the small drone or smartphone," Journal of Practical Engineering Education, vol. 8, no. 1, pp. 1-7, June, 2016. https://doi.org/10.14702/JPEE.2016.001
  2. S. J. Pyeon, K. Y. Choi, and J. Y. Lee, Why Drones Now, Miraebook Publishing Co., July, 2015.
  3. H. Cha, J. Jeon, and S. Lee, "ICT DIY-Part 16: Drone production requirements," Telecommunication Technology Association, TTAK.KO-10.0789-Part16/R1, pp. 1-9, December, 2015.
  4. D. H. Lee and B. J. Kang, "The study of drone configuration for detection objects of rescure in disaster areas," in Proceedings of Korean Institute of Information Technology Summer Conference, pp. 281-282, June, 2016.
  5. H. S. Moon, C. Y. Kim, and W. S. Lee, "Drone-based location detection technique for buried person in collapsed area," The Magazine of the Korean Society of Civil Engineers, vol. 64, no. 4, pp. 32-35, April, 2016.
  6. S. Y. Lim, "Drone utilization in disaster safety field," Science & Technology Policy Institute, vol. 203, pp. 16-19, June, 2015.
  7. NAVER knowledge encyclopedia-Doosan encyclopedia [Internet]. Available: http://terms.naver.com/entry.nhn?docId=1139207&cid=40942&categoryId=32238/.
  8. NAVER cast-Looking at IT in terms of [Internet]. Available: http://navercast.naver.com/contents.nhn?rid=122&contents_id=5025/.