DOI QR코드

DOI QR Code

Magnetic Wireless Power Transfer Antenna Using Ferrite

페라이트를 이용한 자기장 무선전력전송 안테나

  • Ko, Nak-Young (Department of Electronics and Computer Engineering, Ulsan National Institute of Science and Technology) ;
  • Lee, Bon-Young (Department of Electronics and Computer Engineering, Ulsan National Institute of Science and Technology) ;
  • Song, Seong-Kyu (Department of Electronics and Computer Engineering, Ulsan National Institute of Science and Technology) ;
  • Park, Woo-Jin (Department of Electronics and Computer Engineering, Ulsan National Institute of Science and Technology) ;
  • Seo, Seok-Tae (Department of Electronics and Computer Engineering, Ulsan National Institute of Science and Technology) ;
  • Bien, Franklin (Department of Electronics and Computer Engineering, Ulsan National Institute of Science and Technology)
  • 고낙영 (울산과학기술원 전기전자공학과) ;
  • 이본영 (울산과학기술원 전기전자공학과) ;
  • 송성규 (울산과학기술원 전기전자공학과) ;
  • 박우진 (울산과학기술원 전기전자공학과) ;
  • 서석태 (울산과학기술원 전기전자공학과) ;
  • 변영재 (울산과학기술원 전기전자공학과)
  • Received : 2017.06.08
  • Accepted : 2017.07.11
  • Published : 2017.07.25

Abstract

In this paper, we propose magnetic field wireless power transfer antenna using Ferrite. It is possible to transfer magnetic field wireless power without independent ground by using characteristic of ferrite in the point that conventional magnetic field wireless power transfer was possible with independent grounding. Ferrite has a shielding effect of magnetic field and reduces leakage power, thereby improving transfer efficiency. We propose an antenna for magnetic field wireless power transfer using ferrite and confirmed that it is transmitted by 5W magnetic field wireless power through experiments. The wireless power transfer proposed in this paper can be applied variously to the Internet of things by using the magnetic field wireless power transfer through the metal.

본 연구에서 페라이트를 이용한 자기장 무선전력전송 안테나를 제안하였다. 기존에 추가접지가 있어야 자기장 무선전력전송이 가능하였던 점을 페라이트의 특성을 이용하여 추가접지 없이 자기장 무선전력전송이 가능하게 하였다. 페라이트는 자기장의 차폐효과가 있고 누설전력을 줄여주어 전송효율을 높여준다. 페라이트를 이용하여 자기장 무선전력전송을 위한 안테나를 제안하였고 실험을 통해 5W 자기장 무선전력전송 되는 것을 확인하였다. 본 논문에서 제안한 무선전력전송은 금속을 매개로하는 자기장 무선전력전송으로 사물인터넷 분야에 다양하게 응용 될 수 있다.

Keywords

References

  1. S. K. Oruganti, S. H. Heo, M. G. Ma, and F. Bien, "Wireless Energy Transfer: Touch/Proximity/Hover Sensing for Large Contoured Displays and Industrial Applications," IEEE Sensors J., vol. 16, no. 4, pp. 2062-2068, Apr. 2015.
  2. B. Jeon and J. Jeong, "Blocking artifacts reduction in image compression with block boundary discontinuity criterion," IEEE Trans. Circuits and Systems for Video Tech., Vol. 8, no. 3, pp. 345-357, June 1998. https://doi.org/10.1109/76.678634
  3. W. G. Jeon and Y. S. Cho, "An equalization technique for OFDM and MC-CDMA in a multipath fading channels," in Proc. of IEEE Conf. on Acoustics, Speech and Signal Processing, pp. 2529-2532, Munich, Germany, May 1997.
  4. C. Hong, L. Chu, W. Lai, A.-S. Chiang, and W. Fang, "Implementation of a new capacitive touch sensor using the nanoporous anodic aluminum oxide (np-AAO) structure," IEEE Sensors J., vol. 11, no. 12, pp. 3409-3416, Dec. 2011. https://doi.org/10.1109/JSEN.2011.2160255
  5. W. H. Ko and W. Qiang, "Touch mode capacitive pressure sensors," Sens. Actuators A, Phys., vol. 75, no. 3, pp. 242-251, 1999. https://doi.org/10.1016/S0924-4247(99)00069-2
  6. E. So, H. Zhang, and Y.-S. Guan, "Sensing contact with analog resistive technology," in Proc. IEEE Int. Conf. Syst., Man, Cybern. IEEE SMC, vol. 2, Oct. 12-15, 1999, pp. 806-811.
  7. S. Lee and S. Zhai, "The performance of touch screen soft buttons," in Proc. SIGCHI Conf. Human Factors Comput. Syst., 2009, pp. 309-318.
  8. G. Barrett and O. Ryomei, "Projected-capacitive touch technology," Inf. Display, vol. 26, no. 3, pp. 16-21, 2010.
  9. S. G. Lee, H. Hoang, Y. H. Choi, and F. Bien, "Efficiency improvement for magnetic resonance based wireless power transfer with axialmisalignment," Electron. Lett., vol. 48, no. 6, pp. 339-340, Mar. 2012. https://doi.org/10.1049/el.2012.0012
  10. H. Hoang, S. Lee, Y. Kim, Y. Choi, and F. Bien, "An adaptive technique to improve wireless power transfer for consumer electronics," IEEE Trans. Consum. Electron., vol. 58, no. 2, pp. 327-332, May 2012. https://doi.org/10.1109/TCE.2012.6227430
  11. J. Huh, S. Lee, C. Park, G.-H. Cho, and C.-T. Rim, "High performance inductive power transfer system with narrow rail width for on-line electric vehicles," in Proc. IEEE Energy Convers. Congr. Expo. (ECCE), Sep. 2010, pp. 647-651.
  12. S. K. Oruganti and F. Bien, "Flexible wireless energy transfer systems by carbon fiber as a dielectric material: Study and experiments," in Proc. IEEE Wireless Power Transf. (WPT), May 2013, pp. 159-162.
  13. E. Kunsun and H. Arai, "Wireless power transfer using sheet-like waveguide," in Proc. 3rd Eur. Conf. Antennas Propag. (EuCAP), Mar. 2009, pp. 3038-3041.
  14. A. Noda and H. Shinoda, "Selective proximity power transmission using low leakage ribbon waveguide and high-Q resonant coupler," in Proc. SICE Annu. Conf. (SICE), Sep. 2011, pp. 836-841.
  15. Seok Hyon Kang and Chang Won Jung, "Analysis and Design of Planar Textile Resonator for Wearable Magnetic Resonance-Wireless Power Transfer," Journal of The Institute of Electronics and Information Engineers, vol. 53, no. 8, pp. 119-126, August, 2016. https://doi.org/10.5573/ieie.2016.53.8.119
  16. Yeonghwan Kim, Kuhyung Kwon, and Chungyong Lee, "Distributed Antenna System for Intra-vehicle Wireless Energy Transfer," Journal of The Institute of Electronics and Information Engineers, vol. 54, no. 2, pp. 3-8, February, 2017. https://doi.org/10.5573/ieie.2017.54.1.003
  17. ICNIRP Guidelines, "Guidelines for limiting exposure to time-varying electric, magnetic, and electromagnetic fields(up to 300 GHz)," Health Phys., vol. 74, no. 4, 1998, pp. 494-522.
  18. Seok Bae, Don-Chul Choi, Soon-Young Hyun, and Sang Won Lee, "Electromagnetic wave Shielding Materials for the Wireless Power Transfer Module in Mobile Handset," Journal of the Korean Magnetics Society, vol. 23, issue 2, pp. 68-76, April, 2013. https://doi.org/10.4283/JKMS.2013.23.2.068