Journal of the Korean Recycled Construction Resources Institute (한국건설순환자원학회논문집)

Korean Recycled Construction Resources Institute (한국건설순환자원학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Factors Affecting the Strength of Alkali-Activated Slag Binders

알칼리 활성화 슬래그 결합재의 강도 발현 인자에 관한 연구

  • Hwang, Byoung-Il (Department of Architecture, Woosuk University) ;
  • Kang, Suk-Pyo (Department of Architecture, Woosuk University) ;
  • Kim, Sang-Jun (Department of Civil & Environmental Engineering, Gachon University)
  • Received : 2018.06.01
  • Accepted : 2018.06.21
  • Published : 2018.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

In the construction industry, research on alkali activated cement using fly ash or blast furnace slag fine powder has been published in Korea and abroad as a way to reuse industrial byproducts without using cement at all and to obtain economical effects at the same time. the purpose of this paper is to evaluate the effect of the ratio and coefficient of hydration ratio and lime saturation degree on the strength of alkali activated slag cement by chemical quantitative analysis of alkali activated slag cement used in the management of existing portland cement. as a result, it was confirmed that the ratio and coefficient of hydration ratio and lime saturation are all within a certain range.

건설 산업분야에서는 시멘트를 전혀 사용하지 않고 플라이애쉬 또는 고로 슬래그 미분말을 이용한 알칼리 활성화 시멘트에 대한 연구가 활발히 이루어지고 있다. 본 논문에서는 보통 포틀랜드 시멘트 관리에 사용되는 화학적 정량 분석을 알칼리 활성화 슬래그 시멘트의 화학적 정량분석 결과에 적용하여 알칼리활성화 슬래그 시멘트의 역학적 성능에 미치는 영향을 최소화 하고 최적 화학 조성 허용범위를 검토하고자 하였다. 그 결과 수경율 및 석회포화도의 비율 및 계수는 모두 일정한 범위 내에 있음이 확인되었다.

Keywords

References

  1. Cho, Y.K., Kim, H., Kim, Y.A. (2017). Effect of the fineness of fly ash on the compressive strength, Journal of the Korean Recycled Construction Resources Institute, 5(3), 313-319 [in Korean].
  2. Gweok, G.H., Jee, N.Y., Yoon, S.C. (2007). The experimental study on the practical use of secondary product of concrete contained alkali-activated slag, Journal of the Architectural Institute of Korea Structure & Construction, 23(1), 121-128 [in Korean].
  3. Han, C.G., Lee, D.Y. (2016). Quality of high volume blast furnace slag mortar depending on desulfurization gypsum treating methods and fine aggregate type, Journal of the Korean Recycled Construction Resources Institute, 4(2), 157-164 [in Korean]. https://doi.org/10.14190/JRCR.2016.4.2.157
  4. Hanehara, S., Asano, S., Yamamoto, T., Nozaki, T. (2009). Characters of recent 16 fly ashes and their compressive strength of fly ash cement, Cement Science and Concrete Technology, 63, 120-126. https://doi.org/10.14250/cement.63.120
  5. Jeon, B.H., Kim, H.S., Lee, S.H. (2018). A study on the evaluation of the carbonation resistance and properties ternary blended concrete according to replacement ratio of blast furnace slag and fly ash, Journal of the Korea Concrete Institute, 30(1), 23-30 [in Korean]. https://doi.org/10.4334/JKCI.2018.30.1.023
  6. Kim, J.H., Park, B.S., Jung, S.H., Choi, Y.C. (2016). Effect of properties of fly-ashes on the characteristics of fly-ash mortars, Journal of the Korean Recycled Construction Resources Institute, 4(4), 439-445 [in Korean]. https://doi.org/10.14190/JRCR.2016.4.4.439
  7. Koh, K.T., Ryu, G.S., Lee, J.H., Kang, H.J., Jeon, Y.S. (2011). Flowability and compressive strength of cementless alkaliactivated mortar using blast furnace slag, Journal of the Korean Recycled Construction Resources Institute, 6(1), 63-71 [in Korean].
  8. Koh, K.T., Ryu, G,S., Lee, J.H. (2010). Properties of the flowability and strength of cementless alkali-activated mortar using the mixed fly ash and ground granulated blast-furnace slag, Journal of the Korean Recycled Construction Resources Institute, 5(4), 114-121 [in Korean].
  9. Korean Standard Association. (2016). Korean Standard L 5405 Fly ash.
  10. Lee, H.J., Suh, J.I., Yoo, S.W. (2016). Bond behavior of concrete according to replacement ratio of fly ash and compressive strength of concrete, Journal of the Korean Recycled Construction Resources Institute, 4(1), 19-24 [in Korean]. https://doi.org/10.14190/JRCR.2016.4.1.019
  11. Moon, K.J. (2004). Properties of Non-Sintered Cement and Comcrete Recycled with Industrial Waste, Ph.D Thesis, Chonbuk National University.
  12. Ryu, G.S., Koh, K.T., Lee, J.H. (2013). Strength development and durability of geopolymer mortar using the combined fly ash and blast-furnace slag, Journal of the Korean Recycled Construction Resources Institute, 1(1), 35-41 [in Korean]. https://doi.org/10.14190/JRCR.2013.1.1.035
  13. We, J.W., KiM, S.H., Kim, S.H., Ji, S.W., Choi, S.K., Seo, C.H. (2010). An experimental study on lightweight aggregate blast furnace slag concrete by alkali-activated reaction, Journal of the Architectural Institute of Korea Structure & Construction, 26(9), 87-94 [in Korean].